If this value is On, then the Watchdog feature is
enabled
and the Watchdog Update Interval value is valid.
If enabled this feature
automatically resets the server
if the LSC software does not reset the watchdog
timer
within the specified Watchdog Update Interval.
NOTE : This is a hard
reset that will immediately reset
the system without taking NetWare down.
This might
result in some files being corrupted.
Parsed from file Rmtchas.mib.txt
Company: None
Module: INTELCORPORATIONICMBGENERICCHASSIS-MIB
If this value is On, then the Watchdog feature is
enabled
and the Watchdog Update Interval value is valid.
If enabled this feature
automatically resets the server
if the LSC software does not reset the watchdog
timer
within the specified Watchdog Update Interval.
NOTE : This is a hard
reset that will immediately reset
the system without taking NetWare down.
This might
result in some files being corrupted.
Parsed from file INTELCORPORATIONICMBGENERICCHASSIS-MIB.mib
Module: INTELCORPORATIONICMBGENERICCHASSIS-MIB
Vendor: Intel Corporation
Module: INTELCORPORATIONICMBGENERICCHASSIS-MIB
[Automatically extracted from oidview.com]
a1004UseSystemWatchdogFeature OBJECT-TYPE SYNTAX INTEGER { vOff (0), vOn (1) } ACCESS read-write STATUS mandatory DESCRIPTION "If this value is On, then the Watchdog feature is enabled and the Watchdog Update Interval value is valid. If enabled this feature automatically resets the server if the LSC software does not reset the watchdog timer within the specified Watchdog Update Interval. NOTE : This is a hard reset that will immediately reset the system without taking NetWare down. This might result in some files being corrupted." ::= {eSystemControl 12}
a1004UseSystemWatchdogFeature OBJECT-TYPE SYNTAX INTEGER { vOff (0), vOn (1) } ACCESS read-write STATUS mandatory DESCRIPTION "If this value is On, then the Watchdog feature is enabled and the Watchdog Update Interval value is valid. If enabled this feature automatically resets the server if the LSC software does not reset the watchdog timer within the specified Watchdog Update Interval. NOTE : This is a hard reset that will immediately reset the system without taking NetWare down. This might result in some files being corrupted." ::= {eSystemControl 12}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.1 | a1004Selfid | 0 | 0 | A unique number that identifies this row. |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.2 | a1004ResetSystem | 0 | 0 | Writing to the attribute initiates an immediate system hard reset. The value for this attribute is either Do Not Reset or Initiat… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.3 | a1004TimedResetIncrement | 0 | 0 | This attribute contains the increments in which a timed reset can be set, in microseconds. |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.4 | a1004TimedResetResolution | 0 | 0 | This attribute contains the resolution to which a Timed Reset can be set, in microseconds. For example, a resolution of 1 second a… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.5 | a1004TimeUntilSystemReset | 0 | 0 | This attribute contains the interval for timed resets, in units of the Timed Reset Increment attribute. Writing a non-zero value, a… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.6 | a1004SystemPowerCapabilities | 0 | 0 | This attribute describes the system power control capabilities. It can have one of the following values: Unknown, On And Off, Off… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.7 | a1004SystemPowerStatus | 0 | 0 | This attribute provides access to the status and control of system power. Its value is either On or Off. |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.8 | a1004EventLoggingCapability | 0 | 0 | This attribute describes the Event Logging Capabilities. The attribute value can be : Unknown, Unsupported, Active, or Inactive. I… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.9 | a1004WatchdogTimerIncrement | 0 | 0 | This attribute contains the increments in which a watchdog update interval can be set. This value is maintained internally by inst… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.10 | a1004WatchdogTimerResolution | 0 | 0 | Resolution to which a watchdog update interval can be set. For example, a watchdog timer resolution of R microsecond and an watchd… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.11 | a1004WatchdogUpdateInterval | 0 | 0 | This attribute specifies the Interval for watchdog resets, in minutes. If the system software does not update the watchdog timer wi… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.13 | a1004ResetSystemAfterDelay | 0 | 0 | This attribute controls whether or not the timed reset function is enabled. If the value is On, then the system will reset when t… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.15 | a1004SavePersistentData | 0 | 0 | When this attribute value is set to ON all the persistent data like thresholds are stored into the persistent data Table. |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.16 | a1004RestoreFactoryDefaults | 0 | 0 | When this attribute value is set to ON all the Factory default thresholds are restored. |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.17 | a1004ShutdownOs | 0 | 0 | Writing to this attribute initiates an immediate OS shutdown. The value of this attribute is either Do Not Shutdown or Shutdown OS. |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.18 | a1004ShutdownOsAndPowerOff | 0 | 0 | Writing to this attribute initiates an immediate OS shutdown and Power Off of the system. The value of this attribute is either Do… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.19 | a1004ShutdownOsAndHardwareReset | 0 | 0 | Writing to this attribute initiates an immediate OS shutdown. The value of this attribute is either Do Not Shutdown and Hardware R… |
| 1.3.6.1.4.1.343.2.6.2.5.1.1004.1.20 | a1004IssueAHardwareNmi | 0 | 0 | Writing to this attribute causes a hardware NMI (Non Maskabale Interrup). It will have one of the two values. Issue an NMI, or Do … |