temperatureLevel values:
normal(1) : Temperature normal
high(2) : Temperature high. Check air circulation
critical(3): Temperature critical. Shut down
in 30 seconds
Parsed from file int_s500.mib.txt
Company: None
Module: INTEL-S500-MIB
temperatureLevel values:
normal(1) : Temperature normal
high(2) : Temperature high. Check air circulation
critical(3): Temperature critical. Shut down
in 30 seconds
Parsed from file INTEL-S500-MIB.mib
Module: INTEL-S500-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
temperatureLevel OBJECT-TYPE SYNTAX INTEGER { normal(1), high(2), critical(3) } ACCESS read-only STATUS mandatory DESCRIPTION "temperatureLevel values: normal(1) : Temperature normal high(2) : Temperature high. Check air circulation critical(3): Temperature critical. Shut down in 30 seconds" ::= { module 5 }
temperatureLevel OBJECT-TYPE SYNTAX INTEGER { normal(1), high(2), critical(3) } ACCESS read-only STATUS mandatory DESCRIPTION "temperatureLevel values: normal(1) : Temperature normal high(2) : Temperature high. Check air circulation critical(3): Temperature critical. Shut down in 30 seconds" ::= { module 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.6.10.1.5.0 | temperatureLevel | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.6.10.1.1 | defaultSwitchMode | 1 | 1 | Default switch mode. This is used by the object portSwitchMode when it's value is default(1) |
| 1.3.6.1.4.1.343.6.10.1.2 | defaultFlowControlMode | 1 | 1 | Default Flow Control mode. This is used by the object portConfFlowControl when it's value is default(1) |
| 1.3.6.1.4.1.343.6.10.1.3 | smuMaster | 1 | 1 | OBSOLETE |
| 1.3.6.1.4.1.343.6.10.1.4 | localManagementTimeout | 1 | 1 | The time (in minutes) that has elapsed before a local management session (telnet or serial) closes when it has not been used. The … |
| 1.3.6.1.4.1.343.6.10.1.6 | redundantPowerSupplyStatus | 1 | 1 | Status for redundant power supply: notPresent(1): RPS not connected or failed. (It may be present but not plugged in or damaged et… |
| 1.3.6.1.4.1.343.6.10.1.7 | portMirroring | 1 | 1 | enable(1): Enabling of port mirroring. This is only possible if RMON is disabled. disable(2): Disabling of port mirroring. RMON ca… |
| 1.3.6.1.4.1.343.6.10.1.8 | disableRmon | 1 | 1 | destroyAll(1): Disable RMON and destroy all probes. This is necessary for enabling port mirroring |
| 1.3.6.1.4.1.343.6.10.1.9 | isRmonActive | 1 | 1 | enabled(1): RMON is enabled disabled(2): RMON is disabled |
| 1.3.6.1.4.1.343.6.10.1.10 | switchTotalTraffic | 1 | 1 | switchtotalTraffic |
| 1.3.6.1.4.1.343.6.10.1.11 | bufferPoolUsed | 1 | 1 | Total switch buffer pool usage. (percentage between 0 and 100) |
| 1.3.6.1.4.1.343.6.10.1.12 | featuresBitFlag | 1 | 1 | Bit field index from bit 1 to 32. If an bit is set, the switch supports the related feature. BIT 1: Distributed VLAN BIT 2: Layer … |
| 1.3.6.1.4.1.343.6.10.1.13 | switchBw | 1 | 1 | Max switch BW. (Mbits per second) |
| 1.3.6.1.4.1.343.6.10.1.14 | ownMatrixAttachmentPort | 1 | 1 | Returns the port number of the Matrix port the switch is attached to. NB: will return 50 for a switch not connected to a Matrix M… |
| 1.3.6.1.4.1.343.6.10.1.15 | stackCrc | 1 | 1 | checksum for stack specific parameters |