An entry in the ATM Port Configuration table.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
atmPortEntry OBJECT-TYPE SYNTAX AtmPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM Port Configuration table." INDEX { atmPortSlot , atmPortPort } ::= { atmPortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.100.4.2.2.1.1.1 | atmPortSlot | 0 | 0 | The slot number |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.2 | atmPortPort | 0 | 0 | The port number |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.3 | atmPortAdminStatus | 0 | 0 | User requested state for port table row. A user may Up or Down an existing port. The user may also modify the characteristics o… |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.4 | atmPortOperStatus | 0 | 0 | Actual state of the port. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.5 | atmPortType | 0 | 0 | Indicates whether this is a UNI or NNI port. The switch supports this operation only on a per-card level, so changing one port ch… |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.6 | atmPortIfType | 0 | 0 | atmPortIftype |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.7 | atmPortSpeed | 0 | 0 | The speed of the port in cells per seconds. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.8 | atmPortAxis | 0 | 0 | Indicates port support for BASIS shelf. The value of this object cannot be changed if there are active connections on the port. Fo… |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.9 | atmPortVcCount | 0 | 0 | The number of virtual connections that terminate on this port. A port may have up to 1024 connections allocated. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.10 | atmPortFirstVcPtr | 0 | 0 | The object identifier denoting the first connection endpoint associated with this port. For current implementation, this OID poi… |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.11 | atmPortMetro | 0 | 0 | Metro Data Cell Header Format. This object applies to T3 non-axis ports. The value of this object is set to disable by the switch… |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.12 | atmPortMgmtProto | 0 | 0 | Indicates the port management protocol used for this port. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.13 | atmPortIlmiVpi | 0 | 0 | The virtual path identifier for the ILMI protocol. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.14 | atmPortIlmiVci | 0 | 0 | The virtual channel identifier for the ILMI protocol. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.15 | atmPortIlmiPollEnable | 0 | 0 | Enable ILMI keep alive polling procedure. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.16 | atmPortIlmiTrapEnable | 0 | 0 | if enabled the ILMI agent will send unsolicited Trap PDUs. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.17 | atmPortIlmiPollIntrvl | 0 | 0 | The number of seconds between each keep alive poll transmitted by the port (T491). |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.18 | atmPortIlmiErrorThresh | 0 | 0 | The number of keep alive polls that must fail within a window of N492 polls, before the port is placed in the failed state (N491). |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.19 | atmPortIlmiEventThresh | 0 | 0 | It specifies the number of keep alive polls within which if N491 polls fail the port is placed in the failed state (N492). |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.20 | atmPortLmiVpi | 0 | 0 | The virtual path identifier for the LMI protocol. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.21 | atmPortLmiVci | 0 | 0 | The virtual channel identifier for the ILMI protocol. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.22 | atmPortLmiPollEnable | 0 | 0 | if enable an Status Enquiry message is sent when the polling timer expires. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.23 | atmPortLmiStatEnqTimer | 0 | 0 | Link integrity timer for the port (T393). |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.24 | atmPortLmiUpdStatTimer | 0 | 0 | Update status timer for the port (T394). |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.25 | atmPortLmiStatEnqRetry | 0 | 0 | The maximum number of times a Status Enquiry message is retransmitted. A Status Enquiry message is retransmitted when timer T393 e… |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.26 | atmPortLmiUpdStatRetry | 0 | 0 | The maximum number of times an Update Status message is retransmitted. An Update Status message is retransmitted when timer T394 e… |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.27 | atmPortLmiPollTimer | 0 | 0 | Polling timer (T396). If polling is enabled a Status Enquiry message is sent when this timer expires. |
| 1.3.6.1.4.1.351.100.4.2.2.1.1.28 | atmPortPercUtil | 0 | 0 | Percentage Utilization can be disabled or enabled. If the use of percent utilization is disabled, the bandwidth for the connectio… |