This object gives the measured value of the entity
addressed by asmAlarmNum. The value in this object
is valid only if asmUnitMeasurable is set to 'yes'.
This object contains value zero for asmUnitMeasurable
value of 'no'.
Parsed from file CISCO-MGX82XX-ENVMON-MIB.mib
Module: CISCO-MGX82XX-ENVMON-MIB
This object gives the measured value of the entity
addressed by asmAlarmNum. The value in this object
is valid only if asmUnitMeasurable is set to 'yes'.
This object contains value zero for asmUnitMeasurable
value of 'no'.
This object gives the measured value of the entity
addressed by asmAlarmNum. The value in this object
is valid only if asmUnitMeasurable is set to 'yes'.
This object contains value zero for asmUnitMeasurable
value of 'no'.
Parsed from file CISCO-MGX82XX-ENVMON-MIB.my.txt
Company: None
Module: CISCO-MGX82XX-ENVMON-MIB
This object gives the measured value of the entity
addressed by asmAlarmNum. The value in this object
is valid only if asmUnitMeasurable is set to 'yes'.
This object contains value zero for asmUnitMeasurable
value of 'no'.
asmUnitMeasuredValue OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'no'." ::= { asmAlarmEntry 7 }
asmUnitMeasuredValue OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'no'." ::= { asmAlarmEntry 7 }
Vendor: Stratacom
Module: CISCO-MGX82XX-ENVMON-MIB
[Automatically extracted from oidview.com]
asmUnitMeasuredValue OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'no'." ::= { asmAlarmEntry 7 }
asmUnitMeasuredValue OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'no'." ::= { asmAlarmEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.1.2.1.1.1 | asmAlarmNum | 0 | 0 | This object is the identifier of a ASM alarm entry. The Alarm is further identified by the objects ASMAlarmType & ASMAlarmUnitNum. |
1.3.6.1.4.1.351.110.1.2.1.1.2 | asmAlarmType | 0 | 0 | The value for this object indicates the type of device for which alarm is applicable. The possible values are : alarmOther (1… |
1.3.6.1.4.1.351.110.1.2.1.1.3 | asmAlarmUnitNum | 0 | 0 | This object identifies one unit among a number of identical units represented in this table having the same asmAlarmType. |
1.3.6.1.4.1.351.110.1.2.1.1.4 | asmAlarmThreshold | 0 | 0 | This object specifies the threshold beyond which the alarmable unit is said to be in an abnormal state. |
1.3.6.1.4.1.351.110.1.2.1.1.5 | asmAlarmSeverity | 0 | 0 | This variable specifies the severity of the alarm to be declared when the asmAlarmThreshold specified is exceeded. |
1.3.6.1.4.1.351.110.1.2.1.1.6 | asmUnitMeasurable | 0 | 0 | This object indicates if the alarm unit is measurable by the switch/system. |
1.3.6.1.4.1.351.110.1.2.1.1.8 | asmPhysicalAlarmState | 0 | 0 | This object indicates the status of the ASM alarm represented in this entry. It is a bitmap where a set bit indicates an abnormal… |
1.3.6.1.4.1.351.110.1.2.1.1.9 | asmClrButton | 0 | 0 | This object when set to asmAlarmClear(2),causes the alarm to be cleared. |