Reference record for OID 1.3.6.1.4.1.351.110.3.17.7.1



parent
1.3.6.1.4.1.351.110.3.17.7 (vismInteropGrp)
node code
1
node name
vismXgcpSdpOst
dot oid
1.3.6.1.4.1.351.110.3.17.7.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) cardSpecific(3) vismConfig(17) vismInteropGrp(7) vismXgcpSdpOst(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) cardSpecific(3) vismConfig(17) vismInteropGrp(7) vismXgcpSdpOst(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) cardSpecific(3) vismConfig(17) vismInteropGrp(7) vismXgcpSdpOst(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) cardSpecific(3) vismConfig(17) vismInteropGrp(7) vismXgcpSdpOst(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) cardSpecific(3) vismConfig(17) vismInteropGrp(7) vismXgcpSdpOst(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) cardSpecific(3) vismConfig(17) vismInteropGrp(7) vismXgcpSdpOst(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/stratacom/basis/cardSpecific/vismConfig/vismInteropGrp/vismXgcpSdpOst
  • /iso/identified-organization/dod/internet/private/enterprises/stratacom/basis/cardSpecific/vismConfig/vismInteropGrp/vismXgcpSdpOst
  • /iso/org/dod/internet/private/enterprise/stratacom/basis/cardSpecific/vismConfig/vismInteropGrp/vismXgcpSdpOst
  • /iso/org/dod/internet/private/enterprises/stratacom/basis/cardSpecific/vismConfig/vismInteropGrp/vismXgcpSdpOst
  • /iso/iso-identified-organization/dod/internet/private/enterprise/stratacom/basis/cardSpecific/vismConfig/vismInteropGrp/vismXgcpSdpOst
  • /iso/iso-identified-organization/dod/internet/private/enterprises/stratacom/basis/cardSpecific/vismConfig/vismInteropGrp/vismXgcpSdpOst
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/351/110/3/17/7/1

    Description by circitor

    This object is used to enable/disable building of s=,t=,o= lines
    in SDP message.

    If this object is set to 'enable' then it indicates that the o=, s=, t=
    lines be built before sending SDP (Session Description Protocol),
    if it set to 'disable' then it indicates that the o=,s=,t=
    parameters need not be built for SDP.

    where o field indicates the owner/creator and session identifier
    s field indicates the session name
    t field indicates the duration while a session is valid.

    Parsed from file CISCO-WAN-AXIPOP-MIB.mib
    Module: CISCO-WAN-AXIPOP-MIB

    Description by cisco_v1

    This object is used to enable/disable building of
    s=,t=,o= lines in SDP(Session Description
    Protocol) message.

    If this object is set to 'enable' then it indicates that
    the o=, s=, t= lines be built before sending
    SDP (Session Description Protocol).
    If it set to 'disable' then it indicates that the o=,s=,t=
    parameters need not be built for SDP.

    where o field indicates the owner/creator and
    session identifier
    s field indicates the session name
    t field indicates the duration while a
    session is valid.

    Description by mibdepot

    This object is used to enable/disable building of
    s=,t=,o= lines in SDP(Session Description
    Protocol) message.

    If this object is set to 'enable' then it indicates that
    the o=, s=, t= lines be built before sending
    SDP (Session Description Protocol).
    If it set to 'disable' then it indicates that the o=,s=,t=
    parameters need not be built for SDP.

    where o field indicates the owner/creator and
    session identifier
    s field indicates the session name
    t field indicates the duration while a
    session is valid.

    Parsed from file CISCO-VISM-MODULE-MIB.my.txt
    Company: None
    Module: CISCO-VISM-MODULE-MIB

    Description by cisco

    This object is used to enable/disable building of
    s=,t=,o= lines in SDP(Session Description
    Protocol) message.

    If this object is set to 'enable' then it indicates that
    the o=, s=, t= lines be built before sending
    SDP (Session Description Protocol).
    If it set to 'disable' then it indicates that the o=,s=,t=
    parameters need not be built for SDP.

    where o field indicates the owner/creator and
    session identifier
    s field indicates the session name
    t field indicates the duration while a
    session is valid.

    Information by circitor

    vismXgcpSdpOst OBJECT-TYPE
      SYNTAX   INTEGER 
               {
                 enable (1),
                 disable (2)
               }
      ACCESS   read-write
      STATUS   mandatory
      DESCRIPTION
            "
            This object is used to enable/disable building of s=,t=,o= lines
            in SDP message.

            If this object is set to 'enable' then it indicates that the o=, s=, t=
            lines be built before sending SDP (Session Description Protocol),
            if it set to 'disable' then it indicates that the o=,s=,t= 
            parameters need not be built for SDP.

            where  o  field indicates the owner/creator and session identifier
                   s  field indicates the session name
                   t  field indicates the duration while a session is valid.
            "
            DEFVAL {enable}
        ::= {vismInteropGrp 1}

    Information by cisco_v1

    vismXgcpSdpOst OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to enable/disable building of 
        s=,t=,o= lines in SDP(Session Description
        Protocol) message.
        
        If this object is set to 'enable' then it indicates that 
        the o=, s=, t= lines be built before sending 
        SDP (Session Description Protocol).
        If it set to 'disable' then it indicates that the o=,s=,t= 
        parameters need not be built for SDP.
        
        where  o  field indicates the owner/creator and
                   session identifier
               s  field indicates the session name
               t  field indicates the duration while a
                  session is valid."
    DEFVAL { enable }
    ::= { vismInteropGrp 1 }

    Information by oid_info

    Vendor: Stratacom
    Module: CISCO-VISM-MODULE-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    vismXgcpSdpOst OBJECT-TYPE
      SYNTAX     INTEGER 
                   {
                    enable  (1),
                    disable (2)
                   }
      MAX-ACCESS read-write
      STATUS     current
      DESCRIPTION
            "This object is used to enable/disable building of 
            s=,t=,o= lines in SDP(Session Description
            Protocol) message.

            If this object is set to 'enable' then it indicates that 
            the o=, s=, t= lines be built before sending 
            SDP (Session Description Protocol).
            If it set to 'disable' then it indicates that the o=,s=,t= 
            parameters need not be built for SDP.

            where  o  field indicates the owner/creator and
                       session identifier
                   s  field indicates the session name
                   t  field indicates the duration while a
                      session is valid.
            "
            DEFVAL { enable }
        ::= { vismInteropGrp 1 }

    Information by cisco

    vismXgcpSdpOst OBJECT-TYPE
      SYNTAX     INTEGER 
                   {
                    enable  (1),
                    disable (2)
                   }
      MAX-ACCESS read-write
      STATUS     current
      DESCRIPTION
            "This object is used to enable/disable building of 
            s=,t=,o= lines in SDP(Session Description
            Protocol) message.

            If this object is set to 'enable' then it indicates that 
            the o=, s=, t= lines be built before sending 
            SDP (Session Description Protocol).
            If it set to 'disable' then it indicates that the o=,s=,t= 
            parameters need not be built for SDP.

            where  o  field indicates the owner/creator and
                       session identifier
                   s  field indicates the session name
                   t  field indicates the duration while a
                      session is valid.
            "
            DEFVAL { enable }
        ::= { vismInteropGrp 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.351)

    Clyde Iwamoto

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.351.110.3.17.7.1.0 vismXgcpSdpOst 0 0 None

    Brothers (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.351.110.3.17.7.2 vismDynamicPT 1 1 This object is used to enable/disable dynamic
    payload type configuration on the VISM Card.