Minimum Enquiry Interval (T493)
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This object specifies minimum Enquiry Interval(T493)
value. The T493 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only when
bbIfSignallingProtocolType set to iLMI(3).
This object specifies minimum Enquiry Interval(T493)
value. The T493 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only when
bbIfSignallingProtocolType set to iLMI(3).
Parsed from file CISCO-WAN-BBIF-ILMI-MIB.my.txt
Company: None
Module: CISCO-WAN-BBIF-ILMI-MIB
This object specifies minimum Enquiry Interval(T493)
value. The T493 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only when
bbIfSignallingProtocolType set to iLMI(3).
bbIfMinEnquiryIntervalT493 OBJECT-TYPE SYNTAX INTEGER (1..20) ACCESS read-write STATUS mandatory DESCRIPTION " Minimum Enquiry Interval (T493) " ::= { bbIfCnfSigILMIGrpEntry 15}
bbIfMinEnquiryIntervalT493 OBJECT-TYPE SYNTAX INTEGER(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3)." ::= { bbIfCnfSigILMIGrpEntry 15 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
bbIfMinEnquiryIntervalT493 OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3)." ::= { bbIfCnfSigILMIGrpEntry 15}
bbIfMinEnquiryIntervalT493 OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3)." ::= { bbIfCnfSigILMIGrpEntry 15}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1 | bbIfSigPortNum | 0 | 0 | Refers to the logical interface index on the PXM card in MGX node. |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2 | bbIfIlmiEnable | 0 | 0 | The logical interface is a generic entity, it can be used as either a virtual trunk, or user port with UNI support. This variable… |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3 | bbIfSignallingProtocolType | 0 | 0 | This will set the signalling protocol 1 - other 2 - noSignalling 3 - ILMI |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4 | bbIfSignallingVpi | 0 | 0 | Indicates the VPI on which signalling cells arrive. |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5 | bbIfSignallingVci | 0 | 0 | Indicates the VCI on which signalling cells arrive. |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6 | bbIfAddrPrefix | 0 | 0 | Network Prefix for the ATM address |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7 | bbIfCustomerId | 0 | 0 | This represents the customer Id. |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8 | bbIfProtocolRevNo | 0 | 0 | For the INS as a read/write variable. |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9 | bbIfIlmiTrapEnable | 0 | 0 | Enable/disable ILMI Trap sending |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10 | bbIfMinTrapInterval | 0 | 0 | Number of seconds between traps. |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11 | bbIfKeepAlivePollingEnable | 0 | 0 | Enable/disable Keep Alive Polling |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12 | bbIfErrorThresholdN491 | 0 | 0 | Error Threshold (N491) value |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13 | bbIfEventThresholdN492 | 0 | 0 | Event Threshold (N492) value |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14 | bbIfPollingIntervalT491 | 0 | 0 | Polling Interval (T491) value |
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16 | bbIfAddrRegEnable | 0 | 0 | Enable/disable ILMI Address Registration |