Reference record for OID 1.3.6.1.4.1.351.110.5.2.7.1.1



parent
1.3.6.1.4.1.351.110.5.2.7.1 (bbChanCnfGrp)
node code
1
node name
bbChanCnfGrpTable
dot oid
1.3.6.1.4.1.351.110.5.2.7.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) basisServices(5) atm(2) bbChan(7) bbChanCnfGrp(1) bbChanCnfGrpTable(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) basisServices(5) atm(2) bbChan(7) bbChanCnfGrp(1) bbChanCnfGrpTable(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) basisServices(5) atm(2) bbChan(7) bbChanCnfGrp(1) bbChanCnfGrpTable(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) basisServices(5) atm(2) bbChan(7) bbChanCnfGrp(1) bbChanCnfGrpTable(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) basisServices(5) atm(2) bbChan(7) bbChanCnfGrp(1) bbChanCnfGrpTable(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) basisServices(5) atm(2) bbChan(7) bbChanCnfGrp(1) bbChanCnfGrpTable(1)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/stratacom/basis/basisServices/atm/bbChan/bbChanCnfGrp/bbChanCnfGrpTable
  • /iso/identified-organization/dod/internet/private/enterprises/stratacom/basis/basisServices/atm/bbChan/bbChanCnfGrp/bbChanCnfGrpTable
  • /iso/org/dod/internet/private/enterprise/stratacom/basis/basisServices/atm/bbChan/bbChanCnfGrp/bbChanCnfGrpTable
  • /iso/org/dod/internet/private/enterprises/stratacom/basis/basisServices/atm/bbChan/bbChanCnfGrp/bbChanCnfGrpTable
  • /iso/iso-identified-organization/dod/internet/private/enterprise/stratacom/basis/basisServices/atm/bbChan/bbChanCnfGrp/bbChanCnfGrpTable
  • /iso/iso-identified-organization/dod/internet/private/enterprises/stratacom/basis/basisServices/atm/bbChan/bbChanCnfGrp/bbChanCnfGrpTable
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/351/110/5/2/7/1/1

    Description by circitor

    The Broadband Channel config table is for a channel on logical
    interface. There will an entry for each of the channel added on the
    logical partition of the physical line.

    Parsed from file CISCO-WAN-AXIPOP-MIB.mib
    Module: CISCO-WAN-AXIPOP-MIB

    Description by cisco_v1

    The Broadband Channel config table is for a channel on logical
    interface. There will an entry for each of the channel added on the
    logical partition of the physical line.

    Following parameters are needed if the connection is from a
    PXM user port and policing is enabled. These apply to
    connection on PXM lines confiured as user port only.

    PCR/CDVT is used for GCRA1 and
    SCR/MBS is used for GCRA2
    UpcEnable
    UpcPCR
    UpcCDVT
    UpcSCRPolicing
    for CBR conns.
    UpcPCR0
    UpcCDVT0
    for non CBR conns.
    UpcSCR
    UpcMBS

    Description by mibdepot

    The Broadband Channel config table is for a channel on logical
    interface. There will an entry for each of the channel added on the
    logical partition of the physical line.

    Following parameters are needed if the connection is from a
    PXM user port and policing is enabled. These apply to
    connection on PXM lines confiured as user port only.

    PCR/CDVT is used for GCRA1 and
    SCR/MBS is used for GCRA2
    UpcEnable
    UpcPCR
    UpcCDVT
    UpcSCRPolicing
    for CBR conns.
    UpcPCR0
    UpcCDVT0
    for non CBR conns.
    UpcSCR
    UpcMBS

    Parsed from file CISCO-WAN-BBIF-ATM-CONN-MIB.my.txt
    Company: None
    Module: CISCO-WAN-BBIF-ATM-CONN-MIB

    Description by cisco

    The Broadband Channel config table is for a channel on logical
    interface. There will an entry for each of the channel added on the
    logical partition of the physical line.

    Following parameters are needed if the connection is from a
    PXM user port and policing is enabled. These apply to
    connection on PXM lines confiured as user port only.

    PCR/CDVT is used for GCRA1 and
    SCR/MBS is used for GCRA2
    UpcEnable
    UpcPCR
    UpcCDVT
    UpcSCRPolicing
    for CBR conns.
    UpcPCR0
    UpcCDVT0
    for non CBR conns.
    UpcSCR
    UpcMBS

    Information by circitor

    bbChanCnfGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF BbChanCnfGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The Broadband Channel config table is for a channel on logical interface. There will an entry for each of the channel added on the logical partition of the physical line. " ::= { bbChanCnfGrp 1 }

    Information by cisco_v1

    bbChanCnfGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF BbChanCnfGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The Broadband Channel config table is for a channel on logical interface. There will an entry for each of the channel added on the logical partition of the physical line. Following parameters are needed if the connection is from a PXM user port and policing is enabled. These apply to connection on PXM lines confiured as user port only. PCR/CDVT is used for GCRA1 and SCR/MBS is used for GCRA2 UpcEnable UpcPCR UpcCDVT UpcSCRPolicing for CBR conns. UpcPCR0 UpcCDVT0 for non CBR conns. UpcSCR UpcMBS" ::= { bbChanCnfGrp 1 }

    Information by oid_info

    Vendor: Stratacom
    Module: CISCO-WAN-AXIPOP-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    bbChanCnfGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF BbChanCnfGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Broadband Channel config table is for a channel on logical interface. There will an entry for each of the channel added on the logical partition of the physical line. Following parameters are needed if the connection is from a PXM user port and policing is enabled. These apply to connection on PXM lines confiured as user port only. PCR/CDVT is used for GCRA1 and SCR/MBS is used for GCRA2 UpcEnable UpcPCR UpcCDVT UpcSCRPolicing for CBR conns. UpcPCR0 UpcCDVT0 for non CBR conns. UpcSCR UpcMBS" ::= { bbChanCnfGrp 1 }

    Information by cisco

    bbChanCnfGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF BbChanCnfGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Broadband Channel config table is for a channel on logical interface. There will an entry for each of the channel added on the logical partition of the physical line. Following parameters are needed if the connection is from a PXM user port and policing is enabled. These apply to connection on PXM lines confiured as user port only. PCR/CDVT is used for GCRA1 and SCR/MBS is used for GCRA2 UpcEnable UpcPCR UpcCDVT UpcSCRPolicing for CBR conns. UpcPCR0 UpcCDVT0 for non CBR conns. UpcSCR UpcMBS" ::= { bbChanCnfGrp 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.351)

    Clyde Iwamoto

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.351.110.5.2.7.1.1.1 bbChanCnfGrpEntry 53 53 The config table is for logical channel.

    Brothers (2)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.351.110.5.2.7.1.2 bbChanNumNextAvailable 1 1 This variable contains the next unused channel number of the possible
    4096 . This number can be used in channel config table.
    Cha…
    1.3.6.1.4.1.351.110.5.2.7.1.3 bbChanVpIdNextAvailable 1 1 This in only valid for a Service Module, will NOT be used in PXM.

    This variable contains the next unused local VPId of the possi…