This is the RPM's backplane interface.
Currently there is only one interface and
hence only supported value is 1.
Parsed from file CISCO-MGX82XX-RPM-SUBIF-MIB.mib
Module: CISCO-MGX82XX-RPM-SUBIF-MIB
This is the RPM's backplane interface.
Currently there is only one interface and
hence only supported value is 1.
This is the RPM's backplane interface.
Currently there is only one interface and
hence only supported value is 1.
Parsed from file CISCO-MGX82XX-RPM-SUBIF-MIB.my.txt
Company: None
Module: CISCO-MGX82XX-RPM-SUBIF-MIB
This is the RPM's backplane interface.
Currently there is only one interface and
hence only supported value is 1.
rpmPortInterface OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the RPM's backplane interface. Currently there is only one interface and hence only supported value is 1." ::= { rpmPortEntry 2 }
rpmPortInterface OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the RPM's backplane interface. Currently there is only one interface and hence only supported value is 1." ::= { rpmPortEntry 2 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
rpmPortInterface OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the RPM's backplane interface. Currently there is only one interface and hence only supported value is 1." ::= { rpmPortEntry 2 }
rpmPortInterface OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the RPM's backplane interface. Currently there is only one interface and hence only supported value is 1." ::= { rpmPortEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.5.2.9.1.1.1.1 | rpmPortSlotNum | 0 | 0 | This object specifies the the slot number of the RPM card in MGX shelf. |
1.3.6.1.4.1.351.110.5.2.9.1.1.1.3 | rpmPortSubInterface | 0 | 0 | This object identifies the sub-interface number. The value 0 is for the sub-interface on the main interface(rpmPortInterface). |
1.3.6.1.4.1.351.110.5.2.9.1.1.1.4 | rpmPortRowStatus | 0 | 0 | This indicates the status of this subinterface. add(1) : sub-interface is added. del(2) : sub-interface is deleted. mod(3) : Set … |
1.3.6.1.4.1.351.110.5.2.9.1.1.1.5 | rpmPortIpAddress | 0 | 0 | IP address configured on the sub-interface. |
1.3.6.1.4.1.351.110.5.2.9.1.1.1.6 | rpmPortSubNetMask | 0 | 0 | The subnet mask configured on the sub-interface. |
1.3.6.1.4.1.351.110.5.2.9.1.1.1.7 | rpmPortState | 0 | 0 | This indicates the state of this sub-interface. notConfigured(1) : Sub-interface is not configured. active(2) : Sub-interf… |