This object gives the packetization period for a particular codec
in milli secs.
for G.711a allowed values are 10 & 20
for G.711u allowed values are 10 & 20
for G.726 at rate 32 kbps allowed values are 10 ,20 30 & 40
for G.729a allowed values are 10, 20 ,30 & 40
for G.729ab allowed values are 10, 20, 30 & 40
for clear channel allowed values are 10 and 20
for G.723 allowed values are 30 & 60
Default value for G.723 is 30 and for other codecs it is 10.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This object gives the packetization period for a
particular codec.
for G.711u allowed values are 10 & 20
for G.711a allowed values are 10 & 20
for G.726 at 32 kbps allowed values are 10, 20, 30 & 40
for G.729a allowed values are 10, 20, 30 & 40
for G.729ab allowed values are 10, 20, 30 & 40
for clear channel allowed values are 10 and 20
for G.726 at 16 kbps allowed values are 10, 20, 30 & 40
for G.726 at 14 kbps allowed values are 10, 20, 30 & 40
for G.726 at 40 kbps allowed values are 10, 20, 30 & 40
for G.723 allowed values are 30 & 60
for Lossless allowed values are 10 and 20
Default value for G.723 is 30, for other codecs it is 10.
This object gives the packetization period for a
particular codec.
for G.711u allowed values are 10 & 20
for G.711a allowed values are 10 & 20
for G.726 at 32 kbps allowed values are 10, 20, 30 & 40
for G.729a allowed values are 10, 20, 30 & 40
for G.729ab allowed values are 10, 20, 30 & 40
for clear channel allowed values are 10 and 20
for G.726 at 16 kbps allowed values are 10, 20, 30 & 40
for G.726 at 14 kbps allowed values are 10, 20, 30 & 40
for G.726 at 40 kbps allowed values are 10, 20, 30 & 40
for G.723 allowed values are 30 & 60
for Lossless allowed values are 10 and 20
Default value for G.723 is 30, for other codecs it is 10.
Parsed from file CISCO-VISM-CODEC-MIB.my.txt
Company: None
Module: CISCO-VISM-CODEC-MIB
This object gives the packetization period for a
particular codec.
for G.711u allowed values are 10 & 20
for G.711a allowed values are 10 & 20
for G.726 at 32 kbps allowed values are 10, 20, 30 & 40
for G.729a allowed values are 10, 20, 30 & 40
for G.729ab allowed values are 10, 20, 30 & 40
for clear channel allowed values are 10 and 20
for G.726 at 16 kbps allowed values are 10, 20, 30 & 40
for G.726 at 14 kbps allowed values are 10, 20, 30 & 40
for G.726 at 40 kbps allowed values are 10, 20, 30 & 40
for G.723 allowed values are 30 & 60
for Lossless allowed values are 10 and 20
Default value for G.723 is 30, for other codecs it is 10.
vismCodecPktPeriod OBJECT-TYPE SYNTAX INTEGER { ten (10), twenty (20), thirty (30), fourty (40), sixty (60) } ACCESS read-write STATUS mandatory DESCRIPTION " This object gives the packetization period for a particular codec in milli secs. for G.711a allowed values are 10 & 20 for G.711u allowed values are 10 & 20 for G.726 at rate 32 kbps allowed values are 10 ,20 30 & 40 for G.729a allowed values are 10, 20 ,30 & 40 for G.729ab allowed values are 10, 20, 30 & 40 for clear channel allowed values are 10 and 20 for G.723 allowed values are 30 & 60 Default value for G.723 is 30 and for other codecs it is 10. " ::= { vismCodecCnfEntry 3 }
vismCodecPktPeriod OBJECT-TYPE SYNTAX INTEGER { ten(10), twenty(20), thirty(30), fourty(40), sixty(60) } ACCESS read-write STATUS mandatory DESCRIPTION " This object gives the packetization period for a particular codec. for G.711u allowed values are 10 & 20 for G.711a allowed values are 10 & 20 for G.726 at 32 kbps allowed values are 10, 20, 30 & 40 for G.729a allowed values are 10, 20, 30 & 40 for G.729ab allowed values are 10, 20, 30 & 40 for clear channel allowed values are 10 and 20 for G.726 at 16 kbps allowed values are 10, 20, 30 & 40 for G.726 at 14 kbps allowed values are 10, 20, 30 & 40 for G.726 at 40 kbps allowed values are 10, 20, 30 & 40 for G.723 allowed values are 30 & 60 for Lossless allowed values are 10 and 20 Default value for G.723 is 30, for other codecs it is 10." ::= { vismCodecCnfEntry 3 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
vismCodecPktPeriod OBJECT-TYPE SYNTAX INTEGER { ten (10), twenty (20), thirty (30), fourty (40), sixty (60) } UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " This object gives the packetization period for a particular codec. for G.711u allowed values are 10 & 20 for G.711a allowed values are 10 & 20 for G.726 at 32 kbps allowed values are 10, 20, 30 & 40 for G.729a allowed values are 10, 20, 30 & 40 for G.729ab allowed values are 10, 20, 30 & 40 for clear channel allowed values are 10 and 20 for G.726 at 16 kbps allowed values are 10, 20, 30 & 40 for G.726 at 14 kbps allowed values are 10, 20, 30 & 40 for G.726 at 40 kbps allowed values are 10, 20, 30 & 40 for G.723 allowed values are 30 & 60 for Lossless allowed values are 10 and 20 Default value for G.723 is 30, for other codecs it is 10. " ::= { vismCodecCnfEntry 3 }
vismCodecPktPeriod OBJECT-TYPE SYNTAX INTEGER { ten (10), twenty (20), thirty (30), fourty (40), sixty (60) } UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " This object gives the packetization period for a particular codec. for G.711u allowed values are 10 & 20 for G.711a allowed values are 10 & 20 for G.726 at 32 kbps allowed values are 10, 20, 30 & 40 for G.729a allowed values are 10, 20, 30 & 40 for G.729ab allowed values are 10, 20, 30 & 40 for clear channel allowed values are 10 and 20 for G.726 at 16 kbps allowed values are 10, 20, 30 & 40 for G.726 at 14 kbps allowed values are 10, 20, 30 & 40 for G.726 at 40 kbps allowed values are 10, 20, 30 & 40 for G.723 allowed values are 30 & 60 for Lossless allowed values are 10 and 20 Default value for G.723 is 30, for other codecs it is 10. " ::= { vismCodecCnfEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.5.5.18.1.1.1 | vismCodecCnfIndex | 0 | 0 | This object is a index to this table. 1 represents G.711u 2 represents G.711a 3 represents G.726 at rate 32 kbps 4 represents G… |
1.3.6.1.4.1.351.110.5.5.18.1.1.2 | vismCodecName | 0 | 0 | This object holds the name of a codec. For example, index 1 will have G.711u as the codec name index 2 will have G.711a as the co… |
1.3.6.1.4.1.351.110.5.5.18.1.1.4 | vismCodecPreference | 0 | 0 | This object contains the user configured preference for each codec. Lower the number, higher the preference of the codec. If the c… |
1.3.6.1.4.1.351.110.5.5.18.1.1.5 | vismCodecString | 0 | 0 | The local connection option or SDP descriptor string that vism would get from the call agent for the codec to be used will be in … |
1.3.6.1.4.1.351.110.5.5.18.1.1.6 | vismCodecIanaType | 0 | 0 | This object specifies the payload types (PT) of a codec. PT numbers for CODECS are assigned by IANA(Internet assigned number Auth… |
1.3.6.1.4.1.351.110.5.5.18.1.1.7 | vismAltCodecString1 | 0 | 0 | This is an alternate codec string to that specified in vismCodecString. This object will also serve as a mapping string along with… |
1.3.6.1.4.1.351.110.5.5.18.1.1.8 | vismAltCodecString2 | 0 | 0 | This is an alternate codec string to that specified in vismCodecString and vismAltCodecString1. This object will also serve as a … |
1.3.6.1.4.1.351.110.5.5.18.1.1.9 | vismAltCodecString3 | 0 | 0 | This is an alternate codec string to that specified in vismCodecString vismAltCodecString1 and vismAltCodecString2. This object wi… |