This object specifies the operators preference for
routing control plane traffic on the interface.
If the object is set to False, then the interface may
be chosen for control plane traffic. If it is True, then
the interface is not chosen, unless there is no other
trunk with parIfOperStatus added(2), in which case it is
chosen regardless of the value of this object.
Parsed from file CISCO-WAN-PAR-MIB.mib
Module: CISCO-WAN-PAR-MIB
This object specifies the operators preference for
routing control plane traffic on the interface.
If the object is set to False, then the interface may
be chosen for control plane traffic. If it is True, then
the interface is not chosen, unless there is no other
trunk with parIfOperStatus added(2), in which case it is
chosen regardless of the value of this object.
This object specifies the operators preference for
routing control plane traffic on the interface.
If the object is set to False, then the interface may
be chosen for control plane traffic. If it is True, then
the interface is not chosen, unless there is no other
trunk with parIfOperStatus added(2), in which case it is
chosen regardless of the value of this object.
Parsed from file CISCO-WAN-PAR-MIB.my.txt
Company: None
Module: CISCO-WAN-PAR-MIB
This object specifies the operators preference for
routing control plane traffic on the interface.
If the object is set to False, then the interface may
be chosen for control plane traffic. If it is True, then
the interface is not chosen, unless there is no other
trunk with parIfOperStatus added(2), in which case it is
chosen regardless of the value of this object.
parTrkCnfgCcRestrict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the operators preference for routing control plane traffic on the interface. If the object is set to False, then the interface may be chosen for control plane traffic. If it is True, then the interface is not chosen, unless there is no other trunk with parIfOperStatus added(2), in which case it is chosen regardless of the value of this object." DEFVAL { false } ::= { parTrkEntry 3}
parTrkCnfgCcRestrict OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the operators preference for routing control plane traffic on the interface. If the object is set to False, then the interface may be chosen for control plane traffic. If it is True, then the interface is not chosen, unless there is no other trunk with parIfOperStatus added(2), in which case it is chosen regardless of the value of this object." DEFVAL { false } ::= { parTrkEntry 3 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
parTrkCnfgCcRestrict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the operators preference for routing control plane traffic on the interface. If the object is set to False, then the interface may be chosen for control plane traffic. If it is True, then the interface is not chosen, unless there is no other trunk with parIfOperStatus added(2), in which case it is chosen regardless of the value of this object." DEFVAL { false } ::= { parTrkEntry 3}
parTrkCnfgCcRestrict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the operators preference for routing control plane traffic on the interface. If the object is set to False, then the interface may be chosen for control plane traffic. If it is True, then the interface is not chosen, unless there is no other trunk with parIfOperStatus added(2), in which case it is chosen regardless of the value of this object." DEFVAL { false } ::= { parTrkEntry 3}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.130.2.2.1.1 | parTrkId | 0 | 0 | This object specifies the logical trunk number associated with the trunk at the local node. |
1.3.6.1.4.1.351.130.2.2.1.2 | parTrkStatReserve | 0 | 0 | Specifies the bandwidth reserved as Statistical Reserve on the trunk in units of cells per second. This object cannot take a valu… |
1.3.6.1.4.1.351.130.2.2.1.4 | parTrkCnfgLineType | 0 | 0 | This object specifies the type of interface terrestrial or satellite. The interfaces configured as terrestrial(1) are preferred o… |
1.3.6.1.4.1.351.130.2.2.1.5 | parTrkCnfgPassSync | 0 | 0 | This object specifies whether the trunk can be used to pass clock sync. If the value of this object is True, clock can be synchron… |
1.3.6.1.4.1.351.130.2.2.1.6 | parTrkCnfgDerouteDelay | 0 | 0 | This object specifies the value of deroute delay timer in seconds. |
1.3.6.1.4.1.351.130.2.2.1.7 | parTrkCnfgTrafficClassFst | 0 | 0 | This object indicates whether Foresight traffic can be routed over the trunk. If the value is true(1), it can be rerouted otherwi… |
1.3.6.1.4.1.351.130.2.2.1.8 | parTrkCnfgTrafficClassFr | 0 | 0 | This object indicates whether Frame Relay traffic can be routed over the trunk. If the value is true(1), it can be rerouted other… |
1.3.6.1.4.1.351.130.2.2.1.9 | parTrkCnfgTrafficClassNts | 0 | 0 | This object indicates whether Non-Time Stamped traffic can be routed over the trunk. If the value is true(1) it can be rerouted o… |
1.3.6.1.4.1.351.130.2.2.1.10 | parTrkCnfgTrafficClassTs | 0 | 0 | This object indicates whether Time Stamped traffic can be routed over the trunk. If the value is true(1) it can be rerouted other… |
1.3.6.1.4.1.351.130.2.2.1.11 | parTrkCnfgTrafficClassVoice | 0 | 0 | This object indicates whether Voice traffic can be routed over the trunk. If the value is true(1), it can be rerouted otherwise n… |
1.3.6.1.4.1.351.130.2.2.1.12 | parTrkCnfgTrafficClassCbr | 0 | 0 | This object indicates whether Constant Bit Rate traffic can be routed over the trunk. If the value is true(1), it can be rerouted… |
1.3.6.1.4.1.351.130.2.2.1.13 | parTrkCnfgTrafficClassVbr | 0 | 0 | This object indicates whether Variable Bit Rate traffic can be routed over the trunk. If the value is true(1), it can be rerouted… |
1.3.6.1.4.1.351.130.2.2.1.14 | parTrkCnfgTrafficClassAbr | 0 | 0 | This object indicates whether Available Bit Rate traffic can be routed over the trunk. If the value is true(1), it can be reroute… |
1.3.6.1.4.1.351.130.2.2.1.15 | parTrkCnfgAdminStatus | 0 | 0 | This object can be used to add or delete the trunk. The value of this object can be set to add(1) only if the parIfOperStatus is … |
1.3.6.1.4.1.351.130.2.2.1.16 | parTrkCnfgRoutingCost | 0 | 0 | This object specifies the cost associated with the trunk for the purpose of routing the connections. This object has significance… |
1.3.6.1.4.1.351.130.2.2.1.17 | parTrkCnfgVccConids | 0 | 0 | The maximum number of routing resource available on the trunk for VCC connections. |
1.3.6.1.4.1.351.130.2.2.1.18 | parTrkCnfgVpcConids | 0 | 0 | The maximum number of routing resource available on the trunk for VPC connections |
1.3.6.1.4.1.351.130.2.2.1.19 | parTrkLocalSlotNumber | 0 | 0 | This object specifies the slot number of the interface card associated with the trunk at the local node. |
1.3.6.1.4.1.351.130.2.2.1.20 | parTrkLocalPortNumber | 0 | 0 | This object specifies the port number of the interface card associated with the trunk at the local node. |
1.3.6.1.4.1.351.130.2.2.1.21 | parTrkLocalVTrunkId | 0 | 0 | This object specifies the Virtual trunk of the interface card associated with the trunk at the local node. The value of this obje… |
1.3.6.1.4.1.351.130.2.2.1.22 | parTrkRemoteNodeId | 0 | 0 | This object specifies the node number of the node attached to the remote end of the trunk. |
1.3.6.1.4.1.351.130.2.2.1.23 | parTrkRemoteTrunkId | 0 | 0 | This object specifies the logical trunk number at the node on the remote end of the trunk. |
1.3.6.1.4.1.351.130.2.2.1.24 | parTrkRemoteSlotNumber | 0 | 0 | This object specifies the slot number of the interface card to which the trunk is attached on the remote node. |
1.3.6.1.4.1.351.130.2.2.1.25 | parTrkRemotePortNumber | 0 | 0 | This object specifies the port number of the interface card to which the trunk is attached on the remote node. |
1.3.6.1.4.1.351.130.2.2.1.26 | parTrkRemoteVTrunkId | 0 | 0 | This object specifies the Virtual trunk of the interface card associated with the trunk at the remote node. The value of this obj… |
1.3.6.1.4.1.351.130.2.2.1.27 | parTrkRemoteNodeIP | 0 | 0 | This object specifies the IP address for the Remote node, used for communication with NMS |
1.3.6.1.4.1.351.130.2.2.1.28 | parTrkRemoteNodeType | 0 | 0 | Specifies the type of the node. |
1.3.6.1.4.1.351.130.2.2.1.29 | parTrkRemoteNodeName | 0 | 0 | This object specifies the name of the remote node and is unique among all the nodes in the network. |
1.3.6.1.4.1.351.130.2.2.1.30 | parTrkAlarmStatus | 0 | 0 | This object specifies the severity of the alarm on the trunk. clear(1) : No Alarm minor(2) : Minor Alarm major(3) : Major Ala… |
1.3.6.1.4.1.351.130.2.2.1.31 | parTrkAlarmType | 0 | 0 | This object specifies the type of alarm on the trunk. The value of this object has no significance if parTrunkAlarmStatus indicat… |
1.3.6.1.4.1.351.130.2.2.1.32 | parTrkBwCapacity | 0 | 0 | Specifies the bandwidth capacity of the trunk. |
1.3.6.1.4.1.351.130.2.2.1.33 | parTrkLineLoad | 0 | 0 | Specifies the bandwidth used by the connections routed over the trunk. |