This object can be configured to enable
or disable cost based route selection from
considering end-to-end delay associated with
the routes. If the value of this object is true(1),
the delay would be considered otherwise daley would
not be considered during routing of connection.
Parsed from file CISCO-WAN-PAR-MIB.mib
Module: CISCO-WAN-PAR-MIB
This object can be configured to enable
or disable cost based route selection from
considering end-to-end delay associated with
the routes. If the value of this object is true(1),
the delay would be considered otherwise daley would
not be considered during routing of connection.
This object can be configured to enable
or disable cost based route selection from
considering end-to-end delay associated with
the routes. If the value of this object is true(1),
the delay would be considered otherwise daley would
not be considered during routing of connection.
Parsed from file CISCO-WAN-PAR-MIB.my.txt
Company: None
Module: CISCO-WAN-PAR-MIB
This object can be configured to enable
or disable cost based route selection from
considering end-to-end delay associated with
the routes. If the value of this object is true(1),
the delay would be considered otherwise daley would
not be considered during routing of connection.
parCmParmsUseDelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be configured to enable or disable cost based route selection from considering end-to-end delay associated with the routes. If the value of this object is true(1), the delay would be considered otherwise daley would not be considered during routing of connection." DEFVAL { false } ::= { parCmParms 16}
parCmParmsUseDelay OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object can be configured to enable or disable cost based route selection from considering end-to-end delay associated with the routes. If the value of this object is true(1), the delay would be considered otherwise daley would not be considered during routing of connection." DEFVAL { false } ::= { parCmParms 16 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
parCmParmsUseDelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be configured to enable or disable cost based route selection from considering end-to-end delay associated with the routes. If the value of this object is true(1), the delay would be considered otherwise daley would not be considered during routing of connection." DEFVAL { false } ::= { parCmParms 16}
parCmParmsUseDelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be configured to enable or disable cost based route selection from considering end-to-end delay associated with the routes. If the value of this object is true(1), the delay would be considered otherwise daley would not be considered during routing of connection." DEFVAL { false } ::= { parCmParms 16}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.130.5.2.16.0 | parCmParmsUseDelay | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.130.5.2.1 | parCmParmsMaxRoutingBundle | 1 | 1 | This object specifies the maximum number of connections that can be routed in one routing cycle. |
| 1.3.6.1.4.1.351.130.5.2.2 | parCmParmsRerouteTimer | 1 | 1 | This object specifies the minimum time after which a connection is routed once it has been successfully routed. |
| 1.3.6.1.4.1.351.130.5.2.3 | parCmParmsResetTimer | 1 | 1 | This object specifies whether the reroute timer should be reset if the path for routed connection failed. If the value of the ob… |
| 1.3.6.1.4.1.351.130.5.2.4 | parCmParmsDnUpPerPass | 1 | 1 | This object specifies the maximum number of connections that are upped or down in one schedule of down connection state machine. |
| 1.3.6.1.4.1.351.130.5.2.5 | parCmParmsDnUpTimer | 1 | 1 | This object specifies the minimum time interval (in milliseconds) between two schedules of the down connection state machine. |
| 1.3.6.1.4.1.351.130.5.2.6 | parCmParmsRrtErrsPerCycle | 1 | 1 | This object specifies the threshold for number of failures to route a connection before it is moved into the wait group. If the v… |
| 1.3.6.1.4.1.351.130.5.2.7 | parCmParmsRrtCycleInterval | 1 | 1 | This object specifies the time (in minutes) for which no attempt is made to route a connection in the wait group. |
| 1.3.6.1.4.1.351.130.5.2.8 | parCmParmsMaxRrtCycles | 1 | 1 | This object specifies the number of times a connection is added to the wait group before declaring it unroutable. |
| 1.3.6.1.4.1.351.130.5.2.9 | parCmParmsRrtPauseTime | 1 | 1 | This object specifies the time interval (in milliseconds) between two routing cycles. |
| 1.3.6.1.4.1.351.130.5.2.10 | parCmParmsMaxUpdates | 1 | 1 | This object specifies the maximum number of connection management updates that are sent by the node in schedule.. |
| 1.3.6.1.4.1.351.130.5.2.11 | parCmParmsRerouteGroups | 1 | 1 | This object specifies the total number of reroute groups. |
| 1.3.6.1.4.1.351.130.5.2.12 | parCmParmsMinRrGroupSize | 1 | 1 | This object specifies the minimum size of reroute group in Cell Load Units. |
| 1.3.6.1.4.1.351.130.5.2.13 | parCmParmsRrGroupInc | 1 | 1 | This object specifies the increment of reroute group size (in Cell Load Units) between adjacent groups. |
| 1.3.6.1.4.1.351.130.5.2.14 | parCmParmsCostBased | 1 | 1 | This object can be configured to enable or disable cost based routing feature. If the value of this object is true(1), the feature… |
| 1.3.6.1.4.1.351.130.5.2.15 | parCmParmsUseCache | 1 | 1 | This object can be configured to enable or disable hop based route selection from using cache of precomputed routes. If the value … |
| 1.3.6.1.4.1.351.130.5.2.17 | parCmParmMaxViaCons | 1 | 1 | This object specifies the maximum number of via user connections that can be routed through the node. |