Specifies the type of test to be conducted on this connection.
The test is executed when both this attribute is set to the appropriate
test and connectionAdminStatus is SET to 'testing'.
The 'continuity' test verifies continuity.
The 'delay' test on successful completion sets the delay in msecs in
connectionTestResult.
This attribute may be set only when connectionOpStatus has the value
'clear', 'fail', or 'down'.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
connectionTestType OBJECT-TYPE SYNTAX INTEGER { continuity(1), delay(2), none(255) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the type of test to be conducted on this connection. The test is executed when both this attribute is set to the appropriate test and connectionAdminStatus is SET to 'testing'. The 'continuity' test verifies continuity. The 'delay' test on successful completion sets the delay in msecs in connectionTestResult. This attribute may be set only when connectionOpStatus has the value 'clear', 'fail', or 'down'." DEFVAL { none } ::= { connectionEntry 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.3.3.1.1 | connectionIndex | 0 | 0 | A unique value greater than 0 for each entry in the table. The value assigned must remain constant at least from one reinitializa… |
1.3.6.1.4.1.351.3.3.1.2 | connectionLocalEndPt | 0 | 0 | The object identifier of the 1st attribute of the end point in the associated protocol specific end point table. |
1.3.6.1.4.1.351.3.3.1.3 | connectionRemoteEndPt | 0 | 0 | The object identifier of the 1st attribute of the end point in the associated protocol specific end point table. |
1.3.6.1.4.1.351.3.3.1.4 | connectionAdminStatus | 0 | 0 | Administrative status of the connection. This attribute may be set to 'testing' only when connectionOpStatus has the value 'clea… |
1.3.6.1.4.1.351.3.3.1.5 | connectionOpStatus | 0 | 0 | A operation status of the connection. 'incomplete' indicates that the some segments of the connection exist but others may be in… |
1.3.6.1.4.1.351.3.3.1.6 | connectionRowStatus | 0 | 0 | To create an entry in this table, set the value of this object to 'createAndGo'. To delete the connection and the corresponding e… |
1.3.6.1.4.1.351.3.3.1.7 | connectionTrkAvoidType | 0 | 0 | User selectable types of trunks to avoid for the transfer of data. Current choices are to avoid satellite links, terrestrial lin… |
1.3.6.1.4.1.351.3.3.1.8 | connectionTrkAvoidZCS | 0 | 0 | Flag to force the connection to avoid trunks with zero code suppression (ZCS). |
1.3.6.1.4.1.351.3.3.1.9 | connectionForesight | 0 | 0 | Flag to enable/disable foresight. |
1.3.6.1.4.1.351.3.3.1.10 | connectionClassOfService | 0 | 0 | A class of service for this connection. The lower the class value, the higher the routing priority of the connection. |
1.3.6.1.4.1.351.3.3.1.11 | connectionCurrRouteDesc | 0 | 0 | A description of the current route. Descriptor gives information about the domain, nodename, slot, and possibly a port for each h… |
1.3.6.1.4.1.351.3.3.1.12 | connectionPrefRouteDesc | 0 | 0 | Descriptor of the preferred route (all hops specified). Descriptor gives information about the domain, nodename, slot, and possib… |
1.3.6.1.4.1.351.3.3.1.13 | connRouteMaster | 0 | 0 | The node name of the route master. |
1.3.6.1.4.1.351.3.3.1.14 | connectionLocOSpacePkts | 0 | 0 | This variable provides the minimum packet load available on the mandatory path of this connection in local->remote direction. Thi… |
1.3.6.1.4.1.351.3.3.1.15 | connectionLocOSpaceBdaCmax | 0 | 0 | This variable provides the minimum BData A Cmax available on the mandatory path of this connection in local->remote direction. Th… |
1.3.6.1.4.1.351.3.3.1.16 | connectionLocOSpaceBdbCmax | 0 | 0 | This variable provides the minimum BData B Cmax available on the mandatory path of this connection in local->remote direction. Th… |
1.3.6.1.4.1.351.3.3.1.17 | connectionRemOSpacePkts | 0 | 0 | This variable provides the minimum packet load available on the mandatory path of this connection in remote->local direction. Thi… |
1.3.6.1.4.1.351.3.3.1.18 | connectionRemOSpaceBdaCmax | 0 | 0 | This variable provides the minimum BData A Cmax available on the mandatory path of this connection in remote->local direction. Th… |
1.3.6.1.4.1.351.3.3.1.19 | connectionRemOSpaceBdbCmax | 0 | 0 | This variable provides the minimum BData B Cmax available on the mandatory path of this connection in remote->local direction. Th… |
1.3.6.1.4.1.351.3.3.1.21 | connectionTestResult | 0 | 0 | This object holds the result of an executed connection test. If a continuity test is executed, this object contains the value 0 if… |
1.3.6.1.4.1.351.3.3.1.22 | connectionAbitStatus | 0 | 0 | A-bit status of the connection. |
1.3.6.1.4.1.351.3.3.1.23 | connectionType | 0 | 0 | Connection Type. fr indicates Framerelay to Framerelay connection. atm indicates Atm to Atm connection and atm-fr indicates Atm to… |
1.3.6.1.4.1.351.3.3.1.24 | connectionLocalStr | 0 | 0 | The Local EndPt information in string format. i.e., the instance information of the EndPt. Framerelay Endpt is displayed as: node.… |
1.3.6.1.4.1.351.3.3.1.25 | connectionRemoteStr | 0 | 0 | The Remote EndPt information in string format. i.e., the instance information of the EndPt. Framerelay Endpt is displayed as: node… |