A frame relay end point Entry
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
frEndPtEntry OBJECT-TYPE SYNTAX FrEndPtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A frame relay end point Entry" INDEX { frEndPtNodeName, frEndPtIfShelf, frEndPtSlot, frEndPtLine, frEndPtPort, frEndPtDlci } ::= { frEndPtTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.3.4.1.1 | frEndPtNodeName | 0 | 0 | The node name. |
| 1.3.6.1.4.1.351.3.4.1.2 | frEndPtIfShelf | 0 | 0 | String identifying the shelf. This is a null string for end points which do not have a shelf name. |
| 1.3.6.1.4.1.351.3.4.1.3 | frEndPtSlot | 0 | 0 | Slot Number. |
| 1.3.6.1.4.1.351.3.4.1.4 | frEndPtLine | 0 | 0 | Line Number. If no line number is associated with the end point then this value is 0. |
| 1.3.6.1.4.1.351.3.4.1.5 | frEndPtPort | 0 | 0 | Port Number. |
| 1.3.6.1.4.1.351.3.4.1.6 | frEndPtDlci | 0 | 0 | DLCI. |
| 1.3.6.1.4.1.351.3.4.1.7 | frEndPtConnIndex | 0 | 0 | If the value of this object is greater than 0 then it is the index identifying the associated connectionEntry. Value 0 indicates … |
| 1.3.6.1.4.1.351.3.4.1.8 | frEndPtAdminStatus | 0 | 0 | Administrative status of the end point. |
| 1.3.6.1.4.1.351.3.4.1.9 | frEndPtOpStatus | 0 | 0 | Operational Status of the end point. The value 'alarm' may only occur with and end point whose frEndPtCardType = 'frsm'. When f… |
| 1.3.6.1.4.1.351.3.4.1.10 | frEndPtRowStatus | 0 | 0 | The manager must set this to 'createAndGo' when creating a new entry. Other end point parameters also can be set in the same req… |
| 1.3.6.1.4.1.351.3.4.1.11 | frEndPtMIR | 0 | 0 | The minimum transmit bandwidth (MIR) parameter (in bits per second) for this end-point. This object has the relationship MIR <= CIR. Th… |
| 1.3.6.1.4.1.351.3.4.1.12 | frEndPtCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in bits per second) for this end-point. Th… |
| 1.3.6.1.4.1.351.3.4.1.13 | frEndPtBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (in bytes) for this end-point. When frEndPtCardType… |
| 1.3.6.1.4.1.351.3.4.1.14 | frEndPtBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (in bytes) for this end-point. When frEndPtCardType is… |
| 1.3.6.1.4.1.351.3.4.1.15 | frEndPtVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in bytes) for this end-point. |
| 1.3.6.1.4.1.351.3.4.1.16 | frEndPtPIR | 0 | 0 | The peak transmit bandwidth (PIR) parameter (in bits per second) for this end-point. This attribute can only be set to values e… |
| 1.3.6.1.4.1.351.3.4.1.17 | frEndPtCMAX | 0 | 0 | The maximum credits that can be accrued for this end-point. This is not applicable for AXIS-frsm channels. |
| 1.3.6.1.4.1.351.3.4.1.18 | frEndPtEcnQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for this end-point's transmit queue. This value is sp… |
| 1.3.6.1.4.1.351.3.4.1.19 | frEndPtQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in bits per second) for this end-point. This value has the relationship… |
| 1.3.6.1.4.1.351.3.4.1.20 | frEndPtPercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for this end-point. This is the expected long-te… |
| 1.3.6.1.4.1.351.3.4.1.21 | frEndPtPriority | 0 | 0 | Priority for the Egress End. The value of this object determines the priority that is given to the data carried by this . If set … |
| 1.3.6.1.4.1.351.3.4.1.22 | frEndPtInitialBurstSize | 0 | 0 | Initial burst size in bytes. Note that InitialBurstSize should be less than or equal to Bc. This is valid for frEndPtType of 'frs… |
| 1.3.6.1.4.1.351.3.4.1.23 | frEndPtDeTagging | 0 | 0 | Enable/disable DE tagging in the ingress direction only. This is valid for frEndPtType of 'frsm'. |
| 1.3.6.1.4.1.351.3.4.1.24 | frEndPtIngressDeThreshold | 0 | 0 | Ingress threshold at which deletion occurs based on DE. This is valid for frEndPtType of 'frsm'. |
| 1.3.6.1.4.1.351.3.4.1.25 | frEndPtEgressQDepth | 0 | 0 | Egress Q Depth. This is valid for frEndPtType of 'frsm'. |
| 1.3.6.1.4.1.351.3.4.1.26 | frEndPtEgressDeThreshold | 0 | 0 | Egress threshold at which deletion occurs based on DE. This is valid for frEndPtType of 'frsm'. |
| 1.3.6.1.4.1.351.3.4.1.27 | frEndPtEgressEcnThreshold | 0 | 0 | ECN threshold. This is valid for frEndPtType of 'frsm'. |
| 1.3.6.1.4.1.351.3.4.1.28 | frEndPtEgressQSelect | 0 | 0 | Selects one out of two possible port queues. The default port queue number is 2 which is the low priority queue. This is only vali… |
| 1.3.6.1.4.1.351.3.4.1.29 | frEndPtLpbkState | 0 | 0 | The state of loopback mode for the end point. This is a bit mapped integer with the values defined as follows: local 1 remote 2 p… |
| 1.3.6.1.4.1.351.3.4.1.30 | frEndPtType | 0 | 0 | Identifies a type of fr end point which some attributes may not apply. In particular the attributes frEndPtInitialBurstSize, frE… |
| 1.3.6.1.4.1.351.3.4.1.31 | frEndPtchanType | 0 | 0 | (1) is frame-relay network interworking, (2) is service interworking with out any SDU translation, (3) is service interworking wi… |
| 1.3.6.1.4.1.351.3.4.1.32 | frEndPtchanFECNconfig | 0 | 0 | The FECN bits in frame-relay are mapped to EFCI bit in the ATM cells. mapEFCI is valid only for SIW. This is only valid for frEnd… |
| 1.3.6.1.4.1.351.3.4.1.33 | frEndPtchanDEtoCLPmap | 0 | 0 | For (1), The DE bit is mapped to CLP bit in ATM cell. For (2) and (3), the DE bit is ignored and CLP bit is set to the constant v… |
| 1.3.6.1.4.1.351.3.4.1.34 | frEndPtchanCLPtoDEmap | 0 | 0 | Values (1), (2) and (3) are valid for SIW. Values (1) and (4) are valid for NIW. For (1), the CLP bit is mapped to DE bit in fram… |