Window size specifies the window size used on each virtual call On
each outgoing call, the WANServer sets the window size in the Call
Request packet, as follows:
- on IPX-Out and PAD calls, WANServer requests a window size of 2.
- on Bridge and Router calls, the WANServer requests the window
size in the configuration tables. The values used for the call
are those signaled by the network in the Call Confirmation
packet. On each incoming call, the WANServer accepts the window
size requested in the Incoming call packet. If no values are
signaled, the WANServer sets the values as follows:
- on IPX-In and SLIP calls, the WANServer uses a window size of 2.
- on Bridge and Router calls, the WANServer uses the window size
specified in the configuration tables.
Parsed from file pacesetter70-soho.mib.txt
Company: adc_kentrox
Module: PACESETTER-COMMON-MIB
x25WindowSize OBJECT-TYPE SYNTAX INTEGER (2..7) ACCESS read-write STATUS mandatory DESCRIPTION "Window size specifies the window size used on each virtual call On each outgoing call, the WANServer sets the window size in the Call Request packet, as follows: - on IPX-Out and PAD calls, WANServer requests a window size of 2. - on Bridge and Router calls, the WANServer requests the window size in the configuration tables. The values used for the call are those signaled by the network in the Call Confirmation packet. On each incoming call, the WANServer accepts the window size requested in the Incoming call packet. If no values are signaled, the WANServer sets the values as follows: - on IPX-In and SLIP calls, the WANServer uses a window size of 2. - on Bridge and Router calls, the WANServer uses the window size specified in the configuration tables." ::= { x25Entry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.358.4.4.1.1.1.1 | x25OperEntry, x25PortIndex | 21 | 21 | Each entry contains information about one X25 port on the system. |
| 1.3.6.1.4.1.358.4.4.1.1.1.2 | x25LapbExtended | 0 | 0 | LAPB extended numbering (SABME) supports extended sequence numbers for efficient operation across media that have long delays, s… |
| 1.3.6.1.4.1.358.4.4.1.1.1.3 | x25DteDceMode | 0 | 0 | DTE/DCE mode specifies whether the port is operating as a DTE or DCE at the X.25 link and packet layers. |
| 1.3.6.1.4.1.358.4.4.1.1.1.4 | x25T1AckTimer | 0 | 0 | LAPB Timer T1 that controls retransmission of unacknowledged frames. |
| 1.3.6.1.4.1.358.4.4.1.1.1.5 | x25T3IdleTimer | 0 | 0 | LAPB Timer T3 that controls determination of whether link is operational. |
| 1.3.6.1.4.1.358.4.4.1.1.1.6 | x25N2RetransmissionCount | 0 | 0 | LAPB parameter N2 that controls retransmission of frame before determination of whether link is operational. |
| 1.3.6.1.4.1.358.4.4.1.1.1.7 | x25KLapbWindowSize | 0 | 0 | LAPB parameter K that specifies the maximum number of outstanding I frames. Value is fixed at 7 for non-extended numbering. For… |
| 1.3.6.1.4.1.358.4.4.1.1.1.8 | x25N1MaxFrameSize | 0 | 0 | LAPB parameter N1 that specifies the maximum number of bits in an I frame. Value is fixed at 1280 for extended numbering(D Chan… |
| 1.3.6.1.4.1.358.4.4.1.1.1.9 | x25PacketSize | 0 | 0 | Packet size specifies the maximum packet size. |
| 1.3.6.1.4.1.358.4.4.1.1.1.11 | x25CUGSupported | 0 | 0 | Specifies whether or not the Closed User Group facility is supported. |
| 1.3.6.1.4.1.358.4.4.1.1.1.12 | x25NuiSupported | 0 | 0 | Specifies whether or not the Network User Identity facility is supported. |
| 1.3.6.1.4.1.358.4.4.1.1.1.13 | x25ReverseChargingRequired | 0 | 0 | Specifies whether or not the Reverse Charging facility is required. |
| 1.3.6.1.4.1.358.4.4.1.1.1.14 | x25OneWayInVCBase | 0 | 0 | Lowest incoming channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.15 | x25NmOneWayInVCs | 0 | 0 | Max. number of incoming channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.16 | x25TwoWayVCBase | 0 | 0 | Lowest two-way channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.17 | x25NmTwoWayVCs | 0 | 0 | Max. number of two-way channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.18 | x25OneWayOutVCBase | 0 | 0 | Lowest outgoing channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.19 | x25NmOneWayOutVCs | 0 | 0 | Max. number of outgoing channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.20 | x25X121Address | 0 | 0 | X.121 address assigned to port by X.25 service supplier. BCD string |
| 1.3.6.1.4.1.358.4.4.1.1.1.21 | x25CallingAddressModification | 0 | 0 | Specifies whether or not the WANServer modifies the calling address field in incoming call packets. |