A switch that controls address filtering. Specifying a
one in a bit position says that the port is in manual
mode.
Each octet of this object specifies a set of eight ports,
with the first octet specifying ports 1 through 8,
the second octet specifying port 9 through 16 etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant
bit represents the highest numbered port. If a
bit has a value of '1', then the corresponding port
is included in the set of ports; the port is not
included if its bit has a value of '0'.
Manual mode means that the bridge purges the learned entries
for that port from its forwarding database, stops its learning
process on that port, and forwards to that port only frames
with destination and source addresses that have been specified
via management.
Parsed from file GIGASWITCH-MIB.mib.txt
Company: None
Module: GIGASWITCH-MIB
A switch that controls address filtering. Specifying a
one in a bit position says that the port is in manual
mode.
Each octet of this object specifies a set of eight ports,
with the first octet specifying ports 1 through 8,
the second octet specifying port 9 through 16 etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant
bit represents the highest numbered port. If a
bit has a value of '1', then the corresponding port
is included in the set of ports; the port is not
included if its bit has a value of '0'.
Manual mode means that the bridge purges the learned entries
for that port from its forwarding database, stops its learning
process on that port, and forwards to that port only frames
with destination and source addresses that have been specified
via management.
Parsed from file DEC-ELAN-MIB.mib
Module: DEC-ELAN-MIB
Vendor: DEC
Module: DEC-ELAN-MIB
[Automatically extracted from oidview.com]
ebrNportSwManualFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5)) ACCESS read-write STATUS mandatory DESCRIPTION "A switch that controls address filtering. Specifying a one in a bit position says that the port is in manual mode. Each octet of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying port 9 through 16 etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. If a bit has a value of '1', then the corresponding port is included in the set of ports; the port is not included if its bit has a value of '0'. Manual mode means that the bridge purges the learned entries for that port from its forwarding database, stops its learning process on that port, and forwards to that port only frames with destination and source addresses that have been specified via management." ::= { filterByBitmapValue 10 }
ebrNportSwManualFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) ACCESS read-write STATUS mandatory DESCRIPTION "A switch that controls address filtering. Specifying a one in a bit position says that the port is in manual mode. Each octet of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying port 9 through 16 etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. If a bit has a value of '1', then the corresponding port is included in the set of ports; the port is not included if its bit has a value of '0'. Manual mode means that the bridge purges the learned entries for that port from its forwarding database, stops its learning process on that port, and forwards to that port only frames with destination and source addresses that have been specified via management." ::= { filterByBitmapValue 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.10.0 | ebrNportSwManualFilter | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.1 | ebrNportSapProtoTable | 1 | 4 | A table that contains filtering information about 802.2 SAPs in the DSAP field for N-port bridges. |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.2 | ebrNportSapFilterCharacteristicsTable | 1 | 4 | A table that contains information about how 802.2 DSAP filters are used within N-port bridges. |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.3 | ebrNportSnapProtoTable | 1 | 4 | A table that contains filtering information about 5-byte SNAP Protocol IDs (PIDs) for N-port bridges. |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.4 | ebrNportSnapFilterCharacteristicsTable | 1 | 4 | A table that contains information about how SNAP Protocol ID (PID) filters are used within N-port bridges. |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.5 | ebrNportStaticDATable | 1 | 4 | This table contains management-specified destination address filtering information about unicast and multicast addresses for N-po… |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.6 | ebrNportStaticDAFilterCharacteristicsTable | 1 | 4 | A table that contains information about how static destination address filters (for unicast and multicast addresses) are used wit… |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.7 | ebrNportStaticSATable | 1 | 4 | A table that contains static source address filtering information about unicast and multicast addresses for N-port bridges. Stati… |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.8 | ebrNportStaticSAFilterCharacteristicsTable | 1 | 4 | A table that contains information about how static source address filters (for unicast and multicast addresses) are used within N… |
| 1.3.6.1.4.1.36.2.15.3.3.3.2.2.9 | ebrNportSwTable | 1 | 3 | This table describes the default filter matrix. |