A control variable to perform reset functions on a DECagent 90. In
response to a Get or a getNext request, the agent returns ready(1) if
SNMP sets are enabled, or setsDisabled(2) if they are disabled.
Setting this value to setsDisabled(2) causes SNMP sets to be disabled.
Note, however, that you cannot re-enable SNMP sets via this mechanism.
SNMP sets can only be re-enabled via the console interface, or by
restoring factory settings. Setting this value to reset(3) causes the
entire module to be reset. Setting this value to resetToFactory(4)
causes the entire device to be reset to the original factory settings.
Setting either reset(3) and resetToFactory(4) results in an immediate
reset with no response PDU being issued.
Parsed from file DEChub90.mib.txt
Company: None
Module: DECHUB90-MIB
A control variable to perform reset functions on a DECagent 90. In
response to a Get or a getNext request, the agent returns ready(1) if
SNMP sets are enabled, or setsDisabled(2) if they are disabled.
Setting this value to setsDisabled(2) causes SNMP sets to be disabled.
Note, however, that you cannot re-enable SNMP sets via this mechanism.
SNMP sets can only be re-enabled via the console interface, or by
restoring factory settings. Setting this value to reset(3) causes the
entire module to be reset. Setting this value to resetToFactory(4)
causes the entire device to be reset to the original factory settings.
Setting either reset(3) and resetToFactory(4) results in an immediate
reset with no response PDU being issued.
Parsed from file DECHUB90-MIB.mib
Module: DECHUB90-MIB
Vendor: DEC
Module: DECHUB90-MIB
[Automatically extracted from oidview.com]
da90Maintenance OBJECT-TYPE SYNTAX INTEGER { ready(1), setsDisabled(2), reset(3), resetToFactory(4) } ACCESS read-write STATUS mandatory DESCRIPTION "A control variable to perform reset functions on a DECagent 90. In response to a Get or a getNext request, the agent returns ready(1) if SNMP sets are enabled, or setsDisabled(2) if they are disabled. Setting this value to setsDisabled(2) causes SNMP sets to be disabled. Note, however, that you cannot re-enable SNMP sets via this mechanism. SNMP sets can only be re-enabled via the console interface, or by restoring factory settings. Setting this value to reset(3) causes the entire module to be reset. Setting this value to resetToFactory(4) causes the entire device to be reset to the original factory settings. Setting either reset(3) and resetToFactory(4) results in an immediate reset with no response PDU being issued." ::= { da90 2 }
da90Maintenance OBJECT-TYPE SYNTAX INTEGER { ready(1), setsDisabled(2), reset(3), resetToFactory(4) } ACCESS read-write STATUS mandatory DESCRIPTION "A control variable to perform reset functions on a DECagent 90. In response to a Get or a getNext request, the agent returns ready(1) if SNMP sets are enabled, or setsDisabled(2) if they are disabled. Setting this value to setsDisabled(2) causes SNMP sets to be disabled. Note, however, that you cannot re-enable SNMP sets via this mechanism. SNMP sets can only be re-enabled via the console interface, or by restoring factory settings. Setting this value to reset(3) causes the entire module to be reset. Setting this value to resetToFactory(4) causes the entire device to be reset to the original factory settings. Setting either reset(3) and resetToFactory(4) results in an immediate reset with no response PDU being issued." ::= { da90 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.10.2.2.0 | da90Maintenance | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.10.2.1 | da90FlashErasures | 1 | 1 | The number of times the flash memory on this DECagent 90 has been erased. This number is the total of erasures for all flash se… |
| 1.3.6.1.4.1.36.2.18.10.2.3 | da90CommunityNumber | 1 | 1 | Number of entries in the da90CommunityTable. |
| 1.3.6.1.4.1.36.2.18.10.2.4 | da90CommunityTable | 1 | 6 | A table of community strings for client communities. |
| 1.3.6.1.4.1.36.2.18.10.2.5 | da90AgentSlot | 1 | 1 | The slot number in which the managing DECagent 90 resides. |
| 1.3.6.1.4.1.36.2.18.10.2.6 | da90ErrorlogTable | 1 | 6 | The da90ErrorlogTable is a ring of eight (8) errorlog entries for this DECagent 90. Thus, the ninth entry will overwrite the fi… |
| 1.3.6.1.4.1.36.2.18.10.2.7 | da90ResetCount | 1 | 1 | The total number of resets to the agent that has occurred, including power-ups. This counter is maintained in non-volatile stor… |
| 1.3.6.1.4.1.36.2.18.10.2.8 | da90BackplaneMode | 1 | 1 | The desired state of the DECagent 90's hub mastership (i.e. it's ability to directly manage repeaters, terminal servers and brid… |
| 1.3.6.1.4.1.36.2.18.10.2.9 | da90BackplaneState | 1 | 1 | Indicates whether the DECagent 90 is managing the hub (i.e. capable of directly managing repeaters, terminal servers and bridges… |
| 1.3.6.1.4.1.36.2.18.10.2.10 | da90BackplaneAddrDbAgingTime | 1 | 1 | A non-volatile value indicating the number of minutes an address discovered by the agent will remain in the forwarding database … |
| 1.3.6.1.4.1.36.2.18.10.2.11 | da90LoadAdminStatus | 1 | 1 | This object is used to control the program TFTP load process of a device. When read, the value other(1) is returned. When set to… |
| 1.3.6.1.4.1.36.2.18.10.2.12 | da90LoadOperStatus | 1 | 1 | The final state of the last load attempt. The value none(1) indicates that no load has been attempted, ever. This object is non… |
| 1.3.6.1.4.1.36.2.18.10.2.13 | da90LoadFilename | 1 | 1 | The name of the file in which to load. When the device is reading, this is the name of the file to be read. When the device is… |
| 1.3.6.1.4.1.36.2.18.10.2.14 | da90LoadIpHostAddr | 1 | 1 | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read… |
| 1.3.6.1.4.1.36.2.18.10.2.15 | da90LoadDevSpecific | 1 | 1 | A device specific parameter which is used to indicate detailed error information about the last attempted load. A value of none(0… |
| 1.3.6.1.4.1.36.2.18.10.2.16 | da90SetupPortStatus | 1 | 1 | This object indicates the current status of the setup port on the front panel of the DECagent. When read, it will return either c… |