Setting a value of enable(1) causes the DECserver to enter an
enable-authorized-mode-pending state. The device will enter authorized
mode if the power is cycled on the device within one minute. The
password used to enable authorized mode will be the current value of
dh90SlotPassword, which must be set to the desired value prior to
setting ds90LAuthorizeMode to enable(1).
Setting a value of disable(2) causes the DECserver to enter a
disable-authorized-mode-pending state. The device will exit authorized
mode if the power is cycled on the device within one minute.
Parsed from file DEChub90.mib.txt
Company: None
Module: DECHUB90-MIB
Setting a value of enable(1) causes the DECserver to enter an
enable-authorized-mode-pending state. The device will enter authorized
mode if the power is cycled on the device within one minute. The
password used to enable authorized mode will be the current value of
dh90SlotPassword, which must be set to the desired value prior to
setting ds90LAuthorizeMode to enable(1).
Setting a value of disable(2) causes the DECserver to enter a
disable-authorized-mode-pending state. The device will exit authorized
mode if the power is cycled on the device within one minute.
Parsed from file DECHUB90-MIB.mib
Module: DECHUB90-MIB
Vendor: DEC
Module: DECHUB90-MIB
[Automatically extracted from oidview.com]
ds90LAuthorizeMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting a value of enable(1) causes the DECserver to enter an enable-authorized-mode-pending state. The device will enter authorized mode if the power is cycled on the device within one minute. The password used to enable authorized mode will be the current value of dh90SlotPassword, which must be set to the desired value prior to setting ds90LAuthorizeMode to enable(1). Setting a value of disable(2) causes the DECserver to enter a disable-authorized-mode-pending state. The device will exit authorized mode if the power is cycled on the device within one minute." ::= { ds90LModuleEntry 17 }
ds90LAuthorizeMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting a value of enable(1) causes the DECserver to enter an enable-authorized-mode-pending state. The device will enter authorized mode if the power is cycled on the device within one minute. The password used to enable authorized mode will be the current value of dh90SlotPassword, which must be set to the desired value prior to setting ds90LAuthorizeMode to enable(1). Setting a value of disable(2) causes the DECserver to enter a disable-authorized-mode-pending state. The device will exit authorized mode if the power is cycled on the device within one minute." ::= { ds90LModuleEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.10.3.2.1.1 | ds90LSlotIndex | 0 | 0 | The slot index value which addresses the dh90SlotTable for this module. |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.2 | ds90LDot3StatsDeferredTransmissions | 0 | 0 | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The c… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.3 | ds90LDot3StatsSingleCollisionFrames | 0 | 0 | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collisio… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.4 | ds90LDot3StatsMultipleCollisionFrames | 0 | 0 | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collis… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.5 | ds90LEnetDataOverruns | 0 | 0 | A count of the number of frames arriving at the DECserver 90 that were lost due to data overrun since it last reinitialized or z… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.6 | ds90LLatCircMsgsIns | 0 | 0 | A count of the number of LAT circuit messages received by this DECserver 90 since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.7 | ds90LLatCircMsgsOuts | 0 | 0 | A count of the number of LAT circuit messages transmitted by this DECserver 90 since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.8 | ds90LLatSessSolicitAccepts | 0 | 0 | A count of the number of LAT solicits accepted by this DECserver 90 since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.9 | ds90LLatSessSolicitRejects | 0 | 0 | A count of the number of LAT solicits rejected by this DECserver 90 since it last reinitialized or zeroed counters. |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.10 | ds90LLatCircDuplsMsgs | 0 | 0 | A count of the number of duplicate LAT messages the DECserver 90 LAT implementation has discarded since it last reinitialized or… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.11 | ds90LLatCircMsgRetransmits | 0 | 0 | A count of the total number of LAT circuit messages this DECserver 90 has retransmitted since it last reinitialized or zeroed co… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.12 | ds90LLatSessIllegalSlots | 0 | 0 | A count of the number of illegal LAT slots this DECserver 90 has received on all LAT sessions since it last reinitialized or zer… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.13 | ds90LIllegalMulticastRcvs | 0 | 0 | A count of the number of illegal multicast LAT messages received on this DECserver 90 since it last reinitialized or zeroed coun… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.14 | ds90LLatCircKeepAlive | 0 | 0 | This defines the number of seconds the LAT circuits provider waits between transmitting LAT circuit layer keep-alive messages. … |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.15 | ds90LLatCircRetransmitLimit | 0 | 0 | This object defines the maximum number of LAT circuit message retransmissions the server will attempt before declaring the circu… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.16 | ds90LLatCircInvalidMsgs | 0 | 0 | This counts the number of invalid LAT messages received on its entry's LAT circuit since the DECserver last reinitialized or zer… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.18 | ds90LMaintenance | 0 | 0 | A control variable to reset the counters on a DECserver 90. In response to a Get or a getNext request, the agent always returns… |
| 1.3.6.1.4.1.36.2.18.10.3.2.1.19 | ds90LPrompt | 0 | 0 | Contains the prompt displayed when a session is local to the DECserver 90L+ terminal server. The default value is '->'. This va… |