Enables or disables the autoconfiguration of a port on a DECserver
90L+. Enabling autoconfiguration allows default settings to be
restored to a port after each reset of the terminal server. Disabling
autoconfiguration causes the speed and certain characteristics of the
port to be stored in non-volatile memory on the terminal server. These
port settings will be restored after the next reset of the device.
NOTE: Set this variable to disable(2) BEFORE setting a new port speed
with rs232PortInSpeed and rs232PortOutSpeed.
For the DECserver 90L, reads of this variable always return enable(1).
Setting this variable to a value other than enable(1) for a DECserver
90L will result in a 'badValue' response.
Parsed from file DEChub90.mib.txt
Company: None
Module: DECHUB90-MIB
Enables or disables the autoconfiguration of a port on a DECserver
90L+. Enabling autoconfiguration allows default settings to be
restored to a port after each reset of the terminal server. Disabling
autoconfiguration causes the speed and certain characteristics of the
port to be stored in non-volatile memory on the terminal server. These
port settings will be restored after the next reset of the device.
NOTE: Set this variable to disable(2) BEFORE setting a new port speed
with rs232PortInSpeed and rs232PortOutSpeed.
For the DECserver 90L, reads of this variable always return enable(1).
Setting this variable to a value other than enable(1) for a DECserver
90L will result in a 'badValue' response.
Parsed from file DECHUB90-MIB.mib
Module: DECHUB90-MIB
Vendor: DEC
Module: DECHUB90-MIB
[Automatically extracted from oidview.com]
ds90LPortAutoConfigure OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables the autoconfiguration of a port on a DECserver 90L+. Enabling autoconfiguration allows default settings to be restored to a port after each reset of the terminal server. Disabling autoconfiguration causes the speed and certain characteristics of the port to be stored in non-volatile memory on the terminal server. These port settings will be restored after the next reset of the device. NOTE: Set this variable to disable(2) BEFORE setting a new port speed with rs232PortInSpeed and rs232PortOutSpeed. For the DECserver 90L, reads of this variable always return enable(1). Setting this variable to a value other than enable(1) for a DECserver 90L will result in a 'badValue' response." ::= { ds90LPortEntry 6 }
ds90LPortAutoConfigure OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables the autoconfiguration of a port on a DECserver 90L+. Enabling autoconfiguration allows default settings to be restored to a port after each reset of the terminal server. Disabling autoconfiguration causes the speed and certain characteristics of the port to be stored in non-volatile memory on the terminal server. These port settings will be restored after the next reset of the device. NOTE: Set this variable to disable(2) BEFORE setting a new port speed with rs232PortInSpeed and rs232PortOutSpeed. For the DECserver 90L, reads of this variable always return enable(1). Setting this variable to a value other than enable(1) for a DECserver 90L will result in a 'badValue' response." ::= { ds90LPortEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.10.3.3.1.1 | ds90LPortIndex | 0 | 0 | The value of charPortIndex for this port. |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.2 | ds90LPortRemoteModification | 0 | 0 | Enables and disables remote modification of the port by the host system. |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.3 | ds90LPortType | 0 | 0 | Selects the type of device connected to the port. |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.4 | ds90LPortBreak | 0 | 0 | Determines if the port responds to local or remote break. |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.5 | ds90LPortTest | 0 | 0 | Setting this variable to enable(2) places the port into loopback mode. Loopback mode can be used to verify that a port is receiv… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.7 | ds90LPortOnDemandLoading | 0 | 0 | Enables or disables on-demand loading of fonts to a port in a DECserver 90L+. For the DECserver 90L, reads of this variable alw… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.8 | ds90LPortDedicatedServiceStatus | 0 | 0 | A status variable indicating whether or not dedicated service is enabled on a terminal server port. Dedicated service on a port m… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.9 | ds90LPortDedicatedServiceName | 0 | 0 | The name of the dedicated service to which a connection will be attempted when a connection to the terminal server port is made.… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.10 | ds90LPortDedicatedServiceNode | 0 | 0 | The node name of the remote system to which a connection will be attempted when a connection to the terminal server port is made… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.11 | ds90LPortDedicatedServicePort | 0 | 0 | The port on the remote system to which a connection will be attempted when a connection to the terminal server port is made. This… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.12 | ds90LPortPreferredServiceStatus | 0 | 0 | A status variable indicating whether or not preferred service is enabled on a terminal server port. Preferred service on a port m… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.13 | ds90LPortPreferredServiceName | 0 | 0 | The name of the preferred service to which a connection will be attempted when a connection to the terminal server port is made.… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.14 | ds90LPortPreferredServiceNode | 0 | 0 | The node name of the remote system to which a connection will be attempted when a connection to the terminal server port is made… |
| 1.3.6.1.4.1.36.2.18.10.3.3.1.15 | ds90LPortPreferredServicePort | 0 | 0 | The port on the remote system to which a connection will be attempted when a connection to the terminal server port is made. This… |