The value of the physical Auto Wrap Enable (AWE) switch for the
trunk port. AWE is provided only for RingIn and RingOut trunks.
AWE should be set ON for connection to DEChub token
ring linecards. It should be set OFF when an
IBM 8228 or equivalent 'dumb' linecard is connected. It MUST be
physically switched to ON when no cable is inserted into
the RI port, in order to cause RI to wrap.
This value of this object is notApplicable(3) for hub trunks.
The value of this object is maintained across power cycles
and resets.
Parsed from file DEChub900-TokenRing.mib.txt
Company: None
Module: DECHUB900-PTRM-MIB-V3-0
The value of the physical Auto Wrap Enable (AWE) switch for the
trunk port. AWE is provided only for RingIn and RingOut trunks.
AWE should be set ON for connection to DEChub token
ring linecards. It should be set OFF when an
IBM 8228 or equivalent 'dumb' linecard is connected. It MUST be
physically switched to ON when no cable is inserted into
the RI port, in order to cause RI to wrap.
This value of this object is notApplicable(3) for hub trunks.
The value of this object is maintained across power cycles
and resets.
Parsed from file DECHUB900-PTRM-MIB-V3-0.mib
Module: DECHUB900-PTRM-MIB-V3-0
Vendor: DEC
Module: DECHUB900-PTRM-MIB-V3-0
[Automatically extracted from oidview.com]
ptrmTrunkAutoWrapEnable OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), notApplicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of the physical Auto Wrap Enable (AWE) switch for the trunk port. AWE is provided only for RingIn and RingOut trunks. AWE should be set ON for connection to DEChub token ring linecards. It should be set OFF when an IBM 8228 or equivalent 'dumb' linecard is connected. It MUST be physically switched to ON when no cable is inserted into the RI port, in order to cause RI to wrap. This value of this object is notApplicable(3) for hub trunks. The value of this object is maintained across power cycles and resets." ::= { ptrmTrunkEntry 5 }
ptrmTrunkAutoWrapEnable OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), notApplicable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of the physical Auto Wrap Enable (AWE) switch for the trunk port. AWE is provided only for RingIn and RingOut trunks. AWE should be set ON for connection to DEChub token ring linecards. It should be set OFF when an IBM 8228 or equivalent 'dumb' linecard is connected. It MUST be physically switched to ON when no cable is inserted into the RI port, in order to cause RI to wrap. This value of this object is notApplicable(3) for hub trunks. The value of this object is maintained across power cycles and resets." ::= { ptrmTrunkEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.3.2.1.1 | ptrmTrunkType | 0 | 0 | Identifies a trunk (i.e. non-lobe) port. All token ring modules implement all four rows defined by the ptrmTrunkType values. If… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.2 | ptrmTrunkOperStatus | 0 | 0 | Indicates whether the trunk port is wrapped or inserted into the linecard's internal ring. If the trunk port is not implemented i… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.3 | ptrmTrunkAdminStatus | 0 | 0 | Used to disable the trunk port of the linecard during operation. When disabled, the trunk port is forced to wrap. The value of th… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.4 | ptrmTrunkMedia | 0 | 0 | The media type of the trunk port. Different module types have different trunk connectors. If a module implements an STP/UTP swit… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.6 | ptrmTrunkAutoPartitionStatus | 0 | 0 | Indicates whether the trunk port has been auto-partitioned. When autopartitioned(2) a trunk is automatically wrapped. |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.7 | ptrmTrunkDetectedSpeed | 0 | 0 | Indicates the speed detected on the incoming data pair. invalid(1) indicates that a valid token ring speed was not detected. not… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.8 | ptrmTrunkPhantomDrive | 0 | 0 | Indicates the state of the RingIn port's phantom current drive and return detect circuits. It is notApplicable(1) on all other t… |
| 1.3.6.1.4.1.36.2.18.11.3.2.1.9 | ptrmTrunkPhantomDetect | 0 | 0 | Indicates the state of the incoming phantom current detect circuit for the RingIn/RingOut Trunk. It is notApplicable(1) to all … |