This object is used to create and delete Broadcast and
Unknown Server components.
If this object is writable, it will accept the values
'createAndGo'
'destroy'
under suitable conditions.
Use decBusAdminStatus to enable and disable service.
Parsed from file GSatm-BUS.mib.V.txt
Company: None
Module: DEC-BUS-MIB
This object is used to create and delete Broadcast and
Unknown Server components.
If this object is writable, it will accept the values
'createAndGo'
'destroy'
under suitable conditions.
Use decBusAdminStatus to enable and disable service.
Parsed from file DEC-BUS-MIB.mib
Module: DEC-BUS-MIB
Vendor: DEC
Module: DEC-BUS-MIB
[Automatically extracted from oidview.com]
decBusRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete Broadcast and Unknown Server components. If this object is writable, it will accept the values 'createAndGo' 'destroy' under suitable conditions. Use decBusAdminStatus to enable and disable service." ::= { decBusConfigEntry 2 }
decBusRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete Broadcast and Unknown Server components. If this object is writable, it will accept the values 'createAndGo' 'destroy' under suitable conditions. Use decBusAdminStatus to enable and disable service." ::= { decBusConfigEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.29.1.1.1.1 | decBusIndex | 0 | 0 | A unique number greater than zero which identifies this table row. |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.3 | decBusAdminStatus | 0 | 0 | The desired state of this BUS component. When a BUS is distributed, this object controls the 'local' server component, as oppose… |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.4 | decBusOperStatus | 0 | 0 | The operational state of this BUS component. A BUS component may not become operational until it has been configured with values… |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.5 | decBusLastChange | 0 | 0 | The value of sysUpTime at the time that this server last entered its current operational state. If the current state was entered… |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.6 | decBusAtmAddress | 0 | 0 | The ATM address of this Broadcast and Unknown Server, or Broadcast and Unknown Server component. Clients establish Multicast Sen… |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.7 | decBusDescription | 0 | 0 | A human-readable string which can contain anything the network manager wants. |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.8 | decBusLanName | 0 | 0 | The name of this emulated LAN. While not required for operational purposes, providing a LAN Name may make it easier to keep trac… |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.9 | decBusLanType | 0 | 0 | The data frame format (or LAN-TYPE) for the emulated LAN this Broadcast and Unknown Server supports. In an active emulated LAN, … |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.10 | decBusMaxDataFrameSize | 0 | 0 | The maximum AAL-5 SDU size for data frames sent over this emulated LAN. This must be one of the standard sizes defined in the LA… |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.11 | decBusMaxFrameAge | 0 | 0 | The maximum amount of time which this Broadcast and Unknown Server can hold a frame before being forced to either forward or disc… |
| 1.3.6.1.4.1.36.2.18.29.1.1.1.12 | decBusMaxForwardingRate | 0 | 0 | The maximum rate at which this Broadcast and Unknown Server will forward frames. |