A DECserver 90L+ (PLUS) variable.
Enables or disables the Autoconfiguration of
the port, the ability of the port to autobaud.
Disabling autoconfiguration also causes the
speed and characteristics of the port to be
stored in non-volatile memory on the server.
The variable is not present if the server is
a DECserver 90L.
Parsed from file dec_hub90.txt
Company: None
Module: DH90-MIB
A DECserver 90L+ (PLUS) variable.
Enables or disables the Autoconfiguration of
the port, the ability of the port to autobaud.
Disabling autoconfiguration also causes the
speed and characteristics of the port to be
stored in non-volatile memory on the server.
The variable is not present if the server is
a DECserver 90L.
Parsed from file DH90-MIB.mib
Module: DH90-MIB
Vendor: Compaq
Module: DH90-MIB (dec_hub90)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ds90LPortAutoConfigure OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A DECserver 90L+ (PLUS) variable. Enables or disables the Autoconfiguration of the port, the ability of the port to autobaud. Disabling autoconfiguration also causes the speed and characteristics of the port to be stored in non-volatile memory on the server. The variable is not present if the server is a DECserver 90L." ::= { ds90LPortEntry 6 }
ds90LPortAutoConfigure OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A DECserver 90L+ (PLUS) variable. Enables or disables the Autoconfiguration of the port, the ability of the port to autobaud. Disabling autoconfiguration also causes the speed and characteristics of the port to be stored in non-volatile memory on the server. The variable is not present if the server is a DECserver 90L." ::= { ds90LPortEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.3.3.3.1.1 | ds90LPortIndex | 0 | 0 | The value of charPortIndex for this port. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.2 | ds90LPortRemoteModification | 0 | 0 | Enables and disables remote modification of of the port by the host system. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.3 | ds90LPortType | 0 | 0 | Selects the type of device connected to the port. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.4 | ds90LPortBreak | 0 | 0 | Determines if the port responds to local or remote break. |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.5 | ds90LPortTest | 0 | 0 | Setting this variable to enable places the port into loopback mode. Loopback mode can be used to verify that a port is receiving… |
| 1.3.6.1.4.1.36.2.18.3.3.3.1.7 | ds90LPortOnDemandLoading | 0 | 0 | A DECserver 90L+ (PLUS) variable. Enables or disables on demand loading of fonts. The variable is not present if the server is a D… |