The status of the card. If the value is
read as 'notPresent(1)', then the entire entry
should be considered invalid.
Writing a value of 'powerDown(2)' will cause
the switch to power down the card. Writing a
value of 'powerUp(3)' will cause the switch to
power up the card. Writing a value of
'powerDownThenUp(4)' will cause the switch to power
cycle the line card. Attempts to set any other
values will result in a badValue error.
Cards which are fundamental to switch operation
cannot be powered up or down through this object.
Unpopulated slots will either be 'notPresent(1)'
or missing from the table, and cannot be powered
up or down.
Parsed from file GSatm-Chassis.mib.V.txt
Company: None
Module: DEC-ATM-CHASSIS-MIB
The status of the card. If the value is
read as 'notPresent(1)', then the entire entry
should be considered invalid.
Writing a value of 'powerDown(2)' will cause
the switch to power down the card. Writing a
value of 'powerUp(3)' will cause the switch to
power up the card. Writing a value of
'powerDownThenUp(4)' will cause the switch to power
cycle the line card. Attempts to set any other
values will result in a badValue error.
Cards which are fundamental to switch operation
cannot be powered up or down through this object.
Unpopulated slots will either be 'notPresent(1)'
or missing from the table, and cannot be powered
up or down.
Parsed from file DEC-ATM-CHASSIS-MIB.mib
Module: DEC-ATM-CHASSIS-MIB
Vendor: DEC
Module: DEC-ATM-CHASSIS-MIB
[Automatically extracted from oidview.com]
decAtmCardStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), powerDown(2), powerUp(3), powerDownThenUp(4), fault(5), revisionMismatch(6), selfTestInProgress(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the card. If the value is read as 'notPresent(1)', then the entire entry should be considered invalid. Writing a value of 'powerDown(2)' will cause the switch to power down the card. Writing a value of 'powerUp(3)' will cause the switch to power up the card. Writing a value of 'powerDownThenUp(4)' will cause the switch to power cycle the line card. Attempts to set any other values will result in a badValue error. Cards which are fundamental to switch operation cannot be powered up or down through this object. Unpopulated slots will either be 'notPresent(1)' or missing from the table, and cannot be powered up or down." ::= { decAtmSlotEntry 2 }
decAtmCardStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), powerDown(2), powerUp(3), powerDownThenUp(4), fault(5), revisionMismatch(6), selfTestInProgress(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the card. If the value is read as 'notPresent(1)', then the entire entry should be considered invalid. Writing a value of 'powerDown(2)' will cause the switch to power down the card. Writing a value of 'powerUp(3)' will cause the switch to power up the card. Writing a value of 'powerDownThenUp(4)' will cause the switch to power cycle the line card. Attempts to set any other values will result in a badValue error. Cards which are fundamental to switch operation cannot be powered up or down through this object. Unpopulated slots will either be 'notPresent(1)' or missing from the table, and cannot be powered up or down." ::= { decAtmSlotEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.1 | decAtmSlotIndex | 0 | 0 | The slot number. Varies from 1 to decAtmSlotNumber. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.3 | decAtmCardType | 0 | 0 | The type of the card. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.4 | decAtmCardHasModPhys | 0 | 0 | Indicates whether the linecard has modular physical connectors. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.5 | decAtmCardHwRev | 0 | 0 | The hardware revision of the card. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.6 | decAtmCardFwRev | 0 | 0 | The firmware revision of the card. |
| 1.3.6.1.4.1.36.2.18.30.1.2.4.1.7 | decAtmCardFault | 0 | 0 | Contains a diagnostic code which may aid in troubleshooting faulty cards. Meaningless if decAtmCardStatus is not equal to 'fault… |