The decAtmSlotLedProgram string is a sequence of instructions
for the LED state. The LED constantly repeats the
program. Each LED state is represented by a two octet
sequence where the value of the first octet of the pair
indicates the color of the LED, and the value of the
second octet of the pair indicates the duration in which
that color will be present.
+
| Color | Duration | | Color | Duration |
+
The 'color' octet may have one of the following values:
0 - off
1 - other
2 - red
3 - yellow
4 - green
5 - blue
6 - red-blinking
7 - yellow-blinking
8 - blue-blinking
9 - green-blinking
The value 'off' indicates that the LED is off.
The value 'other' indicates a color not covered by any
others in the list.
The value of the second octet in each pair indicates the
duration in which that color will be present. A value
of zero indicates that the LED is off. A value of 0xff
indicates that the LED is always on. Values in between
0 and 0xff indicate the duration in 10 ms ticks.
A zero length string may be returned if the LED is 'not
present'. This indicates that the LED is currently not
visible.
Activity LEDs are a special case. Activity LEDs are
defined as LEDs which blink whenever data is received on
the line. They are typically on solid under heavy
activity. Since these LEDs can change rapidly, the
following rules apply:
o The initial state of activity LEDs is off.
o If the line shows activity any time in a 10 second
period, then the LED is shown as on.
o If the line shown inactivity any time in a 10 second
period, then the LED is shown as off.
See the 'pcomLedProgram' object in the DECHUB900-COMMON MIB
for examples.
Parsed from file GSatm-Chassis.mib.V.txt
Company: None
Module: DEC-ATM-CHASSIS-MIB
The decAtmSlotLedProgram string is a sequence of instructions
for the LED state. The LED constantly repeats the
program. Each LED state is represented by a two octet
sequence where the value of the first octet of the pair
indicates the color of the LED, and the value of the
second octet of the pair indicates the duration in which
that color will be present.
+
| Color | Duration | | Color | Duration |
+
The 'color' octet may have one of the following values:
0 - off
1 - other
2 - red
3 - yellow
4 - green
5 - blue
6 - red-blinking
7 - yellow-blinking
8 - blue-blinking
9 - green-blinking
The value 'off' indicates that the LED is off.
The value 'other' indicates a color not covered by any
others in the list.
The value of the second octet in each pair indicates the
duration in which that color will be present. A value
of zero indicates that the LED is off. A value of 0xff
indicates that the LED is always on. Values in between
0 and 0xff indicate the duration in 10 ms ticks.
A zero length string may be returned if the LED is 'not
present'. This indicates that the LED is currently not
visible.
Activity LEDs are a special case. Activity LEDs are
defined as LEDs which blink whenever data is received on
the line. They are typically on solid under heavy
activity. Since these LEDs can change rapidly, the
following rules apply:
o The initial state of activity LEDs is off.
o If the line shows activity any time in a 10 second
period, then the LED is shown as on.
o If the line shown inactivity any time in a 10 second
period, then the LED is shown as off.
See the 'pcomLedProgram' object in the DECHUB900-COMMON MIB
for examples.
Parsed from file DEC-ATM-CHASSIS-MIB.mib
Module: DEC-ATM-CHASSIS-MIB
Vendor: DEC
Module: DEC-ATM-CHASSIS-MIB
[Automatically extracted from oidview.com]
decAtmSlotLedProgram OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The decAtmSlotLedProgram string is a sequence of instructions for the LED state. The LED constantly repeats the program. Each LED state is represented by a two octet sequence where the value of the first octet of the pair indicates the color of the LED, and the value of the second octet of the pair indicates the duration in which that color will be present. + | Color | Duration | | Color | Duration | + The 'color' octet may have one of the following values: 0 - off 1 - other 2 - red 3 - yellow 4 - green 5 - blue 6 - red-blinking 7 - yellow-blinking 8 - blue-blinking 9 - green-blinking The value 'off' indicates that the LED is off. The value 'other' indicates a color not covered by any others in the list. The value of the second octet in each pair indicates the duration in which that color will be present. A value of zero indicates that the LED is off. A value of 0xff indicates that the LED is always on. Values in between 0 and 0xff indicate the duration in 10 ms ticks. A zero length string may be returned if the LED is 'not present'. This indicates that the LED is currently not visible. Activity LEDs are a special case. Activity LEDs are defined as LEDs which blink whenever data is received on the line. They are typically on solid under heavy activity. Since these LEDs can change rapidly, the following rules apply: o The initial state of activity LEDs is off. o If the line shows activity any time in a 10 second period, then the LED is shown as on. o If the line shown inactivity any time in a 10 second period, then the LED is shown as off. See the 'pcomLedProgram' object in the DECHUB900-COMMON MIB for examples." ::= { decAtmSlotLedEntry 3 }
decAtmSlotLedProgram OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The decAtmSlotLedProgram string is a sequence of instructions for the LED state. The LED constantly repeats the program. Each LED state is represented by a two octet sequence where the value of the first octet of the pair indicates the color of the LED, and the value of the second octet of the pair indicates the duration in which that color will be present. + | Color | Duration | | Color | Duration | + The 'color' octet may have one of the following values: 0 - off 1 - other 2 - red 3 - yellow 4 - green 5 - blue 6 - red-blinking 7 - yellow-blinking 8 - blue-blinking 9 - green-blinking The value 'off' indicates that the LED is off. The value 'other' indicates a color not covered by any others in the list. The value of the second octet in each pair indicates the duration in which that color will be present. A value of zero indicates that the LED is off. A value of 0xff indicates that the LED is always on. Values in between 0 and 0xff indicate the duration in 10 ms ticks. A zero length string may be returned if the LED is 'not present'. This indicates that the LED is currently not visible. Activity LEDs are a special case. Activity LEDs are defined as LEDs which blink whenever data is received on the line. They are typically on solid under heavy activity. Since these LEDs can change rapidly, the following rules apply: o The initial state of activity LEDs is off. o If the line shows activity any time in a 10 second period, then the LED is shown as on. o If the line shown inactivity any time in a 10 second period, then the LED is shown as off. See the 'pcomLedProgram' object in the DECHUB900-COMMON MIB for examples." ::= { decAtmSlotLedEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.30.1.4.1.1.1 | decAtmSlotLedIndex | 0 | 0 | Secondary index which allows us to model cards with more than one module LED. The mapping between 'decAtmSlotLedIndex' and physi… |
| 1.3.6.1.4.1.36.2.18.30.1.4.1.1.2 | decAtmSlotLedDescr | 0 | 0 | A textual description of the information which the LED is meant to convey. i.e.: +5 Volt Power, DC Okay ATM port activity. Diagno… |