Enable/Disable support for HP Zoner.
Parsed from file axis.mib.txt
Company: None
Module: AXIS-MIB
Enable/Disable support for HP Zoner.
Parsed from file AXIS-MIB.mib
Module: AXIS-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
atlkHPZoner OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable support for HP Zoner." ::= { apple 503 }
atlkHPZoner OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable support for HP Zoner." ::= { apple 503 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.368.2.3.6.503.0 | atlkHPZoner | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.368.2.3.6.500 | atlkEnb | 1 | 1 | The AppleTalk protocol stack enable switch. |
1.3.6.1.4.1.368.2.3.6.501 | atlkKey | 1 | 1 | The AppleTalk protocol stack software key. |
1.3.6.1.4.1.368.2.3.6.502 | atlkZone | 1 | 1 | The AppleTalk zone name. |
1.3.6.1.4.1.368.2.3.6.504 | atlkFont | 1 | 1 | How to respond to a FontListQuery. |
1.3.6.1.4.1.368.2.3.6.505 | atlkBinary | 1 | 1 | Support binary files or not. |
1.3.6.1.4.1.368.2.3.6.506 | atlkBinaryType | 1 | 1 | Specifies which Binary Communications Protocol to use. |
1.3.6.1.4.1.368.2.3.6.510 | aPrint1 | 1 | 1 | The AppleTalk printer 1 name. |
1.3.6.1.4.1.368.2.3.6.511 | aType1 | 1 | 1 | The AppleTalk printer 1 type. |
1.3.6.1.4.1.368.2.3.6.512 | aLogic1 | 1 | 1 | The AppleTalk printer 1's logical printer. |
1.3.6.1.4.1.368.2.3.6.513 | aBinaryType1 | 1 | 1 | Specifies which Binary Communications Protocol to use for AppleTalk printer 1. |
1.3.6.1.4.1.368.2.3.6.520 | aPrint2 | 1 | 1 | The AppleTalk printer 2 name. |
1.3.6.1.4.1.368.2.3.6.521 | aType2 | 1 | 1 | The AppleTalk printer 2 type. |
1.3.6.1.4.1.368.2.3.6.522 | aLogic2 | 1 | 1 | The AppleTalk printer 2's logical printer. |
1.3.6.1.4.1.368.2.3.6.523 | aBinaryType2 | 1 | 1 | Specifies which Binary Communications Protocol to use for AppleTalk printer 2. |
1.3.6.1.4.1.368.2.3.6.530 | aPrint3 | 1 | 1 | The AppleTalk printer 3 name. |
1.3.6.1.4.1.368.2.3.6.531 | aType3 | 1 | 1 | The AppleTalk printer 3 type. |
1.3.6.1.4.1.368.2.3.6.532 | aLogic3 | 1 | 1 | The AppleTalk printer 3's logical printer. |
1.3.6.1.4.1.368.2.3.6.533 | aBinaryType3 | 1 | 1 | Specifies which Binary Communications Protocol to use for AppleTalk printer 3. |
1.3.6.1.4.1.368.2.3.6.602 | httpEnable | 0 | 0 | Enable/Disable HTTP |
1.3.6.1.4.1.368.2.3.6.604 | enableMediaAccess | 0 | 0 | Enable/Disable media access |