sensorProbeSwitchRelayOnPort OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports"
View at oid-info.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.1 | hhmsSensorArraySwitchDescription | 0 | 0 | A Description of this sensor Switch |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.2 | hhmsSensorArraySwitchLocation | 0 | 0 | The physical location of this sensor Switch |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.3 | hhmsSensorArraySwitchStatus | 1 | 1 | The current status of this Sensor, only input switches have a status |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.4 | hhmsSensorArraySwitchOnline | 0 | 0 | If this Sensor is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.5 | hhmsSensorArraySwitchGoOnline | 0 | 0 | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.6 | hhmsSensorArraySwitchDirection | 0 | 0 | To set a switch to input enter 0. To set a switch to output enter 1 |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.7 | hhmsSensorArraySwitchNormalState | 0 | 0 | The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch sens… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.8 | hhmsSensorArraySwitchOutputLevel | 0 | 0 | An output swith can be set to this level |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.9 | hhmsSensorArraySwitchTestState | 0 | 0 | hhmsSensorArraySwitchtestState |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.10 | hhmsSensorArraySwitchIndex | 0 | 0 | The index into the Switch sensor table |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.11 | sensorProbeSwitchEmailTrapLimit | 0 | 0 | sensorProbeSwitchEmailTrapLimit OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIP… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.12 | sensorProbeSwitchEmailTrapSchedule | 0 | 0 | sensorProbeSwitchEmailTrapSchedule OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: Em… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.13 | sensorProbeSwitchEmailTrapInterval | 0 | 0 | sensorProbeSwitchEmailTrapInterval OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum t… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.14 | sensorProbeSwitchSendNormalTrap | 0 | 0 | sensorProbeSwitchSendNormalTrap OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIP… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.15 | sensorProbeSwitchDelayError | 0 | 0 | sensorProbeSwitchDelayError OBJECT-TYPE SYNTAX INTEGER (0..65534) ACCESS read-write STATUS mandatory DESCRIPTION "Time in secon… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.16 | sensorProbeSwitchDelayNormal | 0 | 0 | sensorProbeSwitchDelayNormal OBJECT-TYPE SYNTAX INTEGER (0..65534) ACCESS read-write STATUS mandatory DESCRIPTION "Time in seco… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.17 | sensorProbeSwitchIndex | 0 | 0 | sensorProbeSwitchIndex OBJECT-TYPE SYNTAX INTEGER (0..67) ACCESS read-only STATUS mandatory DESCRIPTION "The index into the Swi… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.18 | sensorProbeSwitchRelayCycleTime | 0 | 0 | sensorProbeSwitchRelayCycleTime OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Relay toggl… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.20 | sensorProbeSwitchRelayActiveStatus | 0 | 0 | sensorProbeSwitchRelayActiveStatus OBJECT-TYPE SYNTAX INTEGER { highWarning(3), highCritical(4), lowWarning(5), lowCritical(6),… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.21 | sensorProbeSwitchRelayAction | 0 | 0 | sensorProbeSwitchRelayAction OBJECT-TYPE SYNTAX INTEGER { cycle(2), turn-on(3), turn-off(4) } ACCESS read-write STATUS mandator… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.22 | sensorProbeSwitchEmailInterval | 0 | 0 | sensorProbeSwitchEmailInterval OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "CP8 Only: Min… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.23 | sensorProbeSwitchRelayOutputVoltStatus | 0 | 0 | sensorProbeSwitchRelayOutputVoltStatus OBJECT-TYPE SYNTAX INTEGER { sensorError(7), noVoltagePresent(10), voltagePresent(11) } … |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.24 | sensorProbeSwitchManualRelayCycleTime | 0 | 0 | sensorProbeSwitchManualRelayCycleTime OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Relay… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.25 | sensorProbeSwitchManualRelayAction | 0 | 0 | sensorProbeSwitchManualRelayAction OBJECT-TYPE SYNTAX INTEGER { allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.26 | sensorProbeSwitchRelayDescOn | 0 | 0 | sensorProbeSwitchRelayDescOn OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Description of re… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.27 | sensorProbeSwitchRelayDescOff | 0 | 0 | sensorProbeSwitchRelayDescOff OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Description of r… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.28 | sensorProbeSwitchIndexCount | 0 | 0 | sensorProbeSwitchIndexCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Switch sensor o… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.29 | sensorProbeSwitchSirenCycleTime | 0 | 0 | sensorProbeSwitchSirenCycleTime OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Siren toggl… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.30 | sensorProbeSwitchSirenOnPort | 0 | 0 | sensorProbeSwitchSirenOnPort OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The sensor por… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.31 | sensorProbeSwitchSirenActiveStatus | 0 | 0 | sensorProbeSwitchSirenActiveStatus OBJECT-TYPE SYNTAX INTEGER { highWarning(3), highCritical(4), lowWarning(5), lowCritical(6),… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.32 | sensorProbeSwitchSirenAction | 0 | 0 | sensorProbeSwitchSirenAction OBJECT-TYPE SYNTAX INTEGER { cycle(2), turn-on(3), turn-off(4) } ACCESS read-write STATUS mandator… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.33 | sensorProbeSwitchAcknowledgement | 0 | 0 | sensorProbeSwitchAcknowledgement OBJECT-TYPE SYNTAX INTEGER { ack(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Acknowle… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.34 | sensorProbeSwitchSirenDelayAlarm | 0 | 0 | sensorProbeSwitchSirenDelayAlarm OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Siren dela… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.35 | sensorProbeSwitchURL | 0 | 0 | sensorProbeSwitchURL OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Sensor URL link." |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.36 | sensorProbeSwitchOpenURL | 0 | 0 | sensorProbeSwitchOpenURL OBJECT-TYPE SYNTAX INTEGER { cur-window(0), new-window(2) } ACCESS read-write STATUS mandatory DESCRIP… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.37 | sensorProbeSwitchContTimeHighCritical | 0 | 0 | sensorProbeSwitchContTimeHighCritical OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Con… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.39 | sensorProbeSwitchContTimeNormal | 0 | 0 | sensorProbeSwitchContTimeNormal OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Continuou… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.43 | sensorProbeSwitchCalendar | 0 | 0 | sensorProbeSwitchCalendar OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.44 | sensorProbeSwitchRelayControlMode | 0 | 0 | sensorProbeSwitchRelayControlMode OBJECT-TYPE SYNTAX INTEGER { manual-control(0), notification-control(1), time-control(2), the… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.45 | sensorProbeSwitchSirenControlMode | 0 | 0 | sensorProbeSwitchSirenControlMode OBJECT-TYPE SYNTAX INTEGER { manual-control(0), notification-control(1), time-control(2) } AC… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.46 | sensorProbeSwitchSendNormalMail | 0 | 0 | sensorProbeSwitchSendNormalMail OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIP… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.47 | sensorProbeSwitchSendTrap | 0 | 0 | sensorProbeSwitchSendTrap OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.48 | sensorProbeSwitchSendMail | 0 | 0 | sensorProbeSwitchSendMail OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.49 | sensorProbeSwitchWaterRopeLeakLocation | 0 | 0 | sensorProbeSwitchWaterRopeLeakLocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Location of le… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.50 | sensorProbeSwitchWaterRopeLength | 0 | 0 | sensorProbeSwitchWaterRopeLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Length of water rope… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.51 | sensorProbeSwitchWaterRopeUnit | 0 | 0 | sensorProbeSwitchWaterRopeUnit OBJECT-TYPE SYNTAX INTEGER { meters(0), feet(1) } ACCESS read-write STATUS mandatory DESCRIPTION… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.52 | sensorProbeSwitchWaterRopeImpedance | 0 | 0 | sensorProbeSwitchWaterRopeImpedance OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Sensi… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.53 | sensorProbeSwitchWaterRopeRaw | 0 | 0 | sensorProbeSwitchWaterRopeRaw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Raw value of location o… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.55 | sensorProbeSwitchWaterRopeType | 0 | 0 | sensorProbeSwitchWaterRopeType OBJECT-TYPE SYNTAX INTEGER { custom(0), water(1), fuel(2) } ACCESS read-write STATUS mandatory D… |