The desired state of redundancy for this switch.
'standAlone' is for a switch with no redundancy.
'redundantPrimary' and 'redundantStandby' for
when the switch is desired to be part of a pair
of switches for redundancy.
'redundantUpgrade' is used to update the firmware
of one switch of a pair configured for redundancy.
This mode is just like 'standAlone' except that
switch will not adopt portals.
Note that when configuring two switches, both
starting in 'standAlone' state, configure the
primary first. (If you configure the desired
standby first, it will NOT hear heartbeats from
the primary, and will quickly transition to
_OperState = 'redundantPrimary').
Parsed from file SYMBOL-CC-WS2000-MIB-2.0_3.2.0.0-067R.mib.txt
Company: motorola
Module: SYMBOL-CC-WS2000-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ccRedundancyAdminState OBJECT-TYPE SYNTAX INTEGER { primary(1), standby(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of redundancy for this switch. 'standAlone' is for a switch with no redundancy. 'redundantPrimary' and 'redundantStandby' for when the switch is desired to be part of a pair of switches for redundancy. 'redundantUpgrade' is used to update the firmware of one switch of a pair configured for redundancy. This mode is just like 'standAlone' except that switch will not adopt portals. Note that when configuring two switches, both starting in 'standAlone' state, configure the primary first. (If you configure the desired standby first, it will NOT hear heartbeats from the primary, and will quickly transition to _OperState = 'redundantPrimary'). " ::= { ccRedundancy 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.388.11.2.2.15.1.0 | ccRedundancyAdminState | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.388.11.2.2.15.2 | ccRedundancyOperState | 1 | 1 | The actual state of redundancy for this switch. |
| 1.3.6.1.4.1.388.11.2.2.15.3 | ccRedundancyHeartbeatInterface | 1 | 1 | The interface to use in contacting the FTP or TFTP server. This is required since the actual firmware load is accomplished via b… |
| 1.3.6.1.4.1.388.11.2.2.15.4 | ccRedundancyHeartbeatInterval | 1 | 1 | The duration in seconds between consecutive heartbeats. User can control the frequency of hearbeats by tuning this parameter. |
| 1.3.6.1.4.1.388.11.2.2.15.5 | ccRedundancyRevertDelay | 1 | 1 | The duration which the master WS2000 shall wait before taking over from a backup WS2000. |
| 1.3.6.1.4.1.388.11.2.2.15.6 | ccRedundancyOperMode | 1 | 1 | Current Operational Mode of the switch. |
| 1.3.6.1.4.1.388.11.2.2.15.7 | ccRedundancyPreemptionEnable | 1 | 1 | This interface is used to Enable/Disable Preemption of Backup by Master |
| 1.3.6.1.4.1.388.11.2.2.15.8 | ccRedundancySubnetTable | 1 | 3 | Table for Redundancy enabled on Subnets. |