Vendor: Motorola
Module: SYMBOL-AP-MIB (SYMBOL-AP-MIB-01g12_3.2.0.0-067R.mib)
Type: ENTRY
Access: not-accessible
Syntax: ApWlanEntry
Automatically extracted from www.mibdepot.com
apWlanEntry OBJECT-TYPE SYNTAX ApWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { apWlanIndex } ::= { apWlanTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.388.11.3.4.2.1.1.1 | apWlanIndex | 0 | 0 | Simple index. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.2 | apWlanName | 0 | 0 | Name of the WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.3 | apWlanEssid | 0 | 0 | ESSID of the WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.4 | apWlanUseRadio | 0 | 0 | Use either 802.11a radio or 802.11b/g radio, or, for 802.11n radios, select the frequency band i.e. 2.4 GHz or 5.0 GHz. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.5 | apWlanMaxMus | 0 | 0 | Maximum number of MU associations is allowed for the WLAN. The total number of MUs for the entire AP cannot exceed 127. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.6 | apWlanAclPolicy | 0 | 0 | Point to the ACL policy used for this WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.7 | apWlanSecurityPolicy | 0 | 0 | Point to the Security policy used for this WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.8 | apWlanQosPolicy | 0 | 0 | Point to the QOS policy used for this WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.9 | apWlanAuthKerberosUsername | 0 | 0 | Kerberos Username which is the same as the ESSID if the WLAN uses Kerberos Authentication |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.10 | apWlanAuthKerberosPassword | 0 | 0 | Kerberos Password for authenticating the AP to the KDC. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.11 | apWlanDisallowMuToMu | 0 | 0 | Set to true to prohibit MU-to-MU communication. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.12 | apWlanUseSecureBeacon | 0 | 0 | Enable the Secure Beacon checkbox to disallow the Access Point from broadcasting an ESSID in its beacons. This is a safeguard to … |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.13 | apWlanAnswerBroadcastEss | 0 | 0 | Answer broadcast ESS. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.14 | apWlanWeight | 0 | 0 | The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs ne… |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.15 | apWlanVlanMode | 0 | 0 | VLAN mode can either Dynamic or Static. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.16 | apWlanVlanId | 0 | 0 | Point to the VLAN id corresponding to WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.17 | apWlanSubnet | 0 | 0 | The LAN to which a WLAN is mapped. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.18 | apWlanClientBackHaul | 0 | 0 | Enable/Disable MESH Client Backhaul on this WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.19 | apWlanHotspot | 0 | 0 | Enable or Disable Hotspot functionality on this WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.20 | apWlanEnable | 0 | 0 | Row enable/disable. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.21 | apWlanMuIdleTimeout | 0 | 0 | Maximum MU idle time in minutes. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.22 | apWlanRateLimitEnabled | 0 | 0 | Enables/disables rate limiting for this WLAN. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.23 | apWlanRateLimitWiredToWireless | 0 | 0 | Sets the per-MU maximum bandwidth allocated for wired to wireless traffic, in kbps. |
| 1.3.6.1.4.1.388.11.3.4.2.1.1.24 | apWlanRateLimitWirelessToWired | 0 | 0 | Sets the per-MU maximum bandwidth allocated for wireless to wired traffic, in kbps. |