Total Frames In.
The total number of frames received on this channel
since it entered Data State.
Parsed from file SATELCOM-MIB.mib.txt
Company: None
Module: SATELCOM-MIB
Total Frames In.
The total number of frames received on this channel
since it entered Data State.
Parsed from file SATELCOM-MIB.mib
Module: SATELCOM-MIB
Vendor: MegaPAC
Module: SATELCOM-MIB
[Automatically extracted from oidview.com]
chanStatTotalFramesIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Frames In. The total number of frames received on this channel since it entered Data State." REFERENCE "CONS IP SDLC LAN ILAN XLAN QLLC HDLC X25 ROUT DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP" ::= { chanStatEntry 9 }
chanStatTotalFramesIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Frames In. The total number of frames received on this channel since it entered Data State." REFERENCE "CONS IP SDLC LAN ILAN XLAN QLLC HDLC X25 ROUT DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP" ::= { chanStatEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.397.4.2.1.1 | chanStatIndex | 0 | 0 | Index. The position of this channel in the controller channel Table. |
| 1.3.6.1.4.1.397.4.2.1.2 | chanStatName | 0 | 0 | Name. A user defined name for routing calls to this channel. |
| 1.3.6.1.4.1.397.4.2.1.3 | chanStatControllerIndex | 0 | 0 | Controller Index. The index to the controller that this channel operates within. |
| 1.3.6.1.4.1.397.4.2.1.4 | chanStatNameCtrlName | 0 | 0 | Controller Name. The controller NAME supporting this channel |
| 1.3.6.1.4.1.397.4.2.1.5 | chanStatConnectedToChannelIndex | 0 | 0 | Connected to Index. The INDEX of the CHANNEL that this channel is connected to. |
| 1.3.6.1.4.1.397.4.2.1.6 | chanStatState | 0 | 0 | State. The current Status of the channel, the status may be one or a combination of the following: disc Disconnected. emul Ch… |
| 1.3.6.1.4.1.397.4.2.1.7 | chanStatSessionStatus | 0 | 0 | Session Status. The Status of the channel during a call session, the status may be one or a combination of the following: State … |
| 1.3.6.1.4.1.397.4.2.1.8 | chanStatEIA | 0 | 0 | EIA Displays the status of the V24/V28 signals on term or muxport links, or call status on X.25 links. The down state indicates th… |
| 1.3.6.1.4.1.397.4.2.1.10 | chanStatTotalFramesOut | 0 | 0 | Total Frames out. The total number of frames transmitted on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.11 | chanStatTotalCharsIn | 0 | 0 | Total Characters In. The total number of characters received on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.12 | chanStatTotalCharsOut | 0 | 0 | Total Characters Out. The total number of characters transmitted on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.13 | chanStatTxWindow | 0 | 0 | Tx Window. The Level 3 Transmit Window size. |
| 1.3.6.1.4.1.397.4.2.1.14 | chanStatRxWindow | 0 | 0 | Rx Window. The Level 3 Receive Window size. |
| 1.3.6.1.4.1.397.4.2.1.15 | chanStatTxSize | 0 | 0 | Tx Size. The maximum size for outgoing packets. |
| 1.3.6.1.4.1.397.4.2.1.16 | chanStatRxSize | 0 | 0 | Rx Size. The maximum acceptable size for incoming packets. |
| 1.3.6.1.4.1.397.4.2.1.17 | chanStatCause | 0 | 0 | Cause. The value of the cause code in the last Clear Packet received or transmitted (decimal). |
| 1.3.6.1.4.1.397.4.2.1.18 | chanStatDiagnostic | 0 | 0 | Diagnostic. The value of the diagnostic code in the last Clear Packet received or transmitted (decimal). |
| 1.3.6.1.4.1.397.4.2.1.19 | chanStatResetCause | 0 | 0 | Reset Cause. The value of the last reset code in the last RESET packet transmitted. |
| 1.3.6.1.4.1.397.4.2.1.20 | chanStatResetDiagnostic | 0 | 0 | Reset Diagnostic. The value of the last diagnostic code in the last RESET packet transmitted. |
| 1.3.6.1.4.1.397.4.2.1.21 | chanStatResetCauseReceived | 0 | 0 | Reset Cause Received. The value of the last reset code in the last RESET packet received. |
| 1.3.6.1.4.1.397.4.2.1.22 | chanStatResetDiagReceived | 0 | 0 | Reset Diagnostic Received. The value of the last diagnostic code in the last RESET packet received. |
| 1.3.6.1.4.1.397.4.2.1.23 | chanStatLevel3State | 0 | 0 | Level 3 State. The level 3 status of the channel. |
| 1.3.6.1.4.1.397.4.2.1.24 | chanStatCallPriority | 0 | 0 | Call Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Pri… |
| 1.3.6.1.4.1.397.4.2.1.25 | chanStatResourcePriority | 0 | 0 | Resource Priority See chanCallPriority above. |
| 1.3.6.1.4.1.397.4.2.1.26 | chanStatPadEnable | 0 | 0 | PAD Enable. The value of this statistic reflects the setting as configured on the channel. |
| 1.3.6.1.4.1.397.4.2.1.27 | chanStatPortMatch | 0 | 0 | Port Match. The TCP port that is connected |
| 1.3.6.1.4.1.397.4.2.1.28 | chanStatPrimaryStation | 0 | 0 | Primary Station. Determines whether the MegaPAC port is functioning as a Primary or Secondary SDLC station. |
| 1.3.6.1.4.1.397.4.2.1.29 | chanStatSDLCState | 0 | 0 | SDLC State. The State of the SDLC connection, may be one of the following: State Description ACTIVE The … |
| 1.3.6.1.4.1.397.4.2.1.30 | chanStatQLLCState | 0 | 0 | QLLC State. The State of the QLLC connection, may be one of the following: State Description CLSD The MegaPAC has rece… |
| 1.3.6.1.4.1.397.4.2.1.31 | chanStatSDLCTransmitState | 0 | 0 | SDLC Transmit State. May be one of the following: State Description NORM The MegaPAC is allowed to transmit data. NULL… |
| 1.3.6.1.4.1.397.4.2.1.32 | chanStatPolls | 0 | 0 | Polls. The quantity of polls that have occured since the link was established |
| 1.3.6.1.4.1.397.4.2.1.33 | chanStatStationAddress | 0 | 0 | Station Address. The IBM PU poll address |
| 1.3.6.1.4.1.397.4.2.1.34 | chanStatXIDIdentification | 0 | 0 | XID Identification. This field contains the first 64 bytes of the XID that has been used. |
| 1.3.6.1.4.1.397.4.2.1.35 | chanStatTries | 0 | 0 | Tries. The number of times the current command has been transmitted. |
| 1.3.6.1.4.1.397.4.2.1.36 | chanStatWindow | 0 | 0 | KLevel 2. The level 2 window size. |
| 1.3.6.1.4.1.397.4.2.1.37 | chanStatLUActive | 0 | 0 | LU Active. If set to YES then the MegaPAC Logical Unit has responded positively to an ACTLU command. If set to NO the MegaPAC has … |
| 1.3.6.1.4.1.397.4.2.1.38 | chanStatBindActive | 0 | 0 | Bind Active. If set to YES then the MegaPAC Logical Unit has responded positively to a BIND command. If set to NO the MegaPAC has … |
| 1.3.6.1.4.1.397.4.2.1.39 | chanStatLUType | 0 | 0 | LU Type. The Session type taken from the BIND command. It may be one of the following: Session Type Description 0 … |
| 1.3.6.1.4.1.397.4.2.1.40 | chanStatBreaksReceived | 0 | 0 | Breaks Rx The number of Break characters received from the terminal. |
| 1.3.6.1.4.1.397.4.2.1.41 | chanStatFramingErrors | 0 | 0 | Framing Errors. The number of characters received with no stop bit appended. The MegaPAC substitutes a '#' character in place of e… |
| 1.3.6.1.4.1.397.4.2.1.42 | chanStatInputOverruns | 0 | 0 | Input Overruns. The number of times that data has been discarded due to a lack of receive buffers. |
| 1.3.6.1.4.1.397.4.2.1.43 | chanStatParityErrors | 0 | 0 | TParity Errors. he number of parity errors received on this channel. |
| 1.3.6.1.4.1.397.4.2.1.44 | chanStatTerminalType | 0 | 0 | Terminal Type. The type of emulation to be applied to the TERM controller, it may be one or more of the following: Type … |
| 1.3.6.1.4.1.397.4.2.1.45 | chanStatCircuitType | 0 | 0 | Circuit Type. The type of circuit used on this channel, it may be one or more of the following: |
| 1.3.6.1.4.1.397.4.2.1.46 | chanStatOptions | 0 | 0 | The option(s) which have been envoked on this channel, one or more of: |
| 1.3.6.1.4.1.397.4.2.1.47 | chanStatBuffers | 0 | 0 | Buffers. The number of data buffers to be used as a threshold value before flow control to the terminal is invoked. |
| 1.3.6.1.4.1.397.4.2.1.48 | chanStatDiscMode | 0 | 0 | Disc mode. Specifies the call disconnect character that may be applied having established a route via the presentation service. |
| 1.3.6.1.4.1.397.4.2.1.49 | chanStatMenuNumber | 0 | 0 | Menu Number. Specifies which menu will be displayed to the user by the presentation service. |
| 1.3.6.1.4.1.397.4.2.1.50 | chanStatHelpNumber | 0 | 0 | Help Number. Specifies which help menu will be displayed to the user by the presentation service. |
| 1.3.6.1.4.1.397.4.2.1.51 | chanStatNewsNumber | 0 | 0 | News Number. The Menu number that will be displayed if an outgoing resource is unavailable. |
| 1.3.6.1.4.1.397.4.2.1.52 | chanStatPadRecall | 0 | 0 | Pad Recall. This parameter allows the user to escape from the data transfer state to the PAD command state. The permitted values a… |
| 1.3.6.1.4.1.397.4.2.1.53 | chanStatEcho | 0 | 0 | Echo. Determines whether 'echo' is enabled or disabled. If set to controlled, the echo facility is controlled by the operator. |
| 1.3.6.1.4.1.397.4.2.1.54 | chanStatDataForwarding | 0 | 0 | Data Forwarding. This parameter controls which character or characters cause the accumulated data to be forwarded. The possible va… |
| 1.3.6.1.4.1.397.4.2.1.55 | chanStatDelay | 0 | 0 | Delay. Specifies the idle time in tenths of a second, allowable between successive characters before the accumulated data is forwa… |
| 1.3.6.1.4.1.397.4.2.1.56 | chanStatDRI | 0 | 0 | DRI. Flow control of terminal by the MegaPAC. Valid settings are: enabled MegaPAC flow controls terminal using XON/XOFF. cts… |
| 1.3.6.1.4.1.397.4.2.1.57 | chanStatPadSignals | 0 | 0 | Pad Signals. Enable X.28 prompts and/or messages to be displayed on the users terminal. |
| 1.3.6.1.4.1.397.4.2.1.58 | chanStatBreak | 0 | 0 | Break. The Action the MegaPAC will take on receipt of a Break Signal. The valid values are: 0 When the MegaPAC receives a Br… |
| 1.3.6.1.4.1.397.4.2.1.59 | chanStatPadding | 0 | 0 | Padding. The number of NULL characters inserted after a carriage return. |
| 1.3.6.1.4.1.397.4.2.1.60 | chanStatFold | 0 | 0 | Fold The number of characters output before line folding occurs. Setting to 0 disables line folding. |
| 1.3.6.1.4.1.397.4.2.1.61 | chanStatDRO | 0 | 0 | Data Restraint Out. |
| 1.3.6.1.4.1.397.4.2.1.62 | chanStatLFI | 0 | 0 | LFI. This parameter controls linefeed insertion after a carriage return. The valid seetings are: 0 Line feed insertion disab… |
| 1.3.6.1.4.1.397.4.2.1.63 | chanStatLFPad | 0 | 0 | LFPad. The number of NULL padding characters sent to a device following a linefeed character. |
| 1.3.6.1.4.1.397.4.2.1.64 | chanStatEdit | 0 | 0 | Edit. Controls editing of text in data transfer state. |
| 1.3.6.1.4.1.397.4.2.1.65 | chanStatCharDel | 0 | 0 | Char Del. The keystroke used for deleting a character. |
| 1.3.6.1.4.1.397.4.2.1.66 | chanStatBufferDel | 0 | 0 | Buffer Del. The keystroke used for deleting the buffer. |
| 1.3.6.1.4.1.397.4.2.1.67 | chanStatDisp | 0 | 0 | Disp The keystroke used to redisplay the data in the buffer. |
| 1.3.6.1.4.1.397.4.2.1.68 | chanStatEditServiceSignals | 0 | 0 | Edit Service Signals. This parameter enables the user to edit the PAD service signals (echoing). The valid settings are: 0 N… |
| 1.3.6.1.4.1.397.4.2.1.69 | chanStatEchoMask | 0 | 0 | Echo Mask. This parameter controls the characters which should not be echoed. The valid settings are: 0 All characters shoul… |
| 1.3.6.1.4.1.397.4.2.1.70 | chanStatParityTreatment | 0 | 0 | Parity Treatment. Determines the parity generation and checking performed valid settings are: 0 No parity generation or check… |
| 1.3.6.1.4.1.397.4.2.1.71 | chanStatPageWait | 0 | 0 | PageWait. Specifies the number of lines to be transmitted, after which the MegaPAC will wait until instructed by the user to conti… |
| 1.3.6.1.4.1.397.4.2.1.72 | chanStatForce | 0 | 0 | Forward Char. The ASCII character which will force data forwarding, 0 disables forced data forwarding. |
| 1.3.6.1.4.1.397.4.2.1.73 | chanStatBreakChar | 0 | 0 | Break Char. The ASCII character in decimal which is used to simulate a BREAK signal. |
| 1.3.6.1.4.1.397.4.2.1.74 | chanStatNetworkParity | 0 | 0 | Network Parity. With the Terminal type set to ASYN+X28, the parity can be forced onto the network side by selecting the approriate… |
| 1.3.6.1.4.1.397.4.2.1.75 | chanStatEscapeDelay | 0 | 0 | Escape Delay. Specifies the time in tenths of a second, that after receiving an ESC character, all characters are buffered before … |
| 1.3.6.1.4.1.397.4.2.1.76 | chanStatDestTsap | 0 | 0 | Destination TSAP The destination Transport Service Access Point. |
| 1.3.6.1.4.1.397.4.2.1.77 | chanStatTransportLevelState | 0 | 0 | Transport Level State. Transport Class 4 session statistics |
| 1.3.6.1.4.1.397.4.2.1.78 | chanStatLinkState | 0 | 0 | Link State. The current state of the Link Control Protocol |
| 1.3.6.1.4.1.397.4.2.1.79 | chanStatProtocolState | 0 | 0 | Protocol State. The current state of the Protocol Control Protocol |
| 1.3.6.1.4.1.397.4.2.1.80 | chanStatProtocol | 0 | 0 | Protocol Displays the protocol configured for the channel |
| 1.3.6.1.4.1.397.4.2.1.81 | chanStatIdentity | 0 | 0 | Identity. The current value of the IDENTITY field being put into the Link Control Protocol or Protocol Control Protocol commands. |
| 1.3.6.1.4.1.397.4.2.1.82 | chanStatDlciRxDe | 0 | 0 | DLCI RX Count. The total number of Frames with the DE bit set received on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.83 | chanStatDlciTxDe | 0 | 0 | DLCI TX Count. The total number of Frames with the DE bit set transmitted on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.84 | chanStatDlciRxFecn | 0 | 0 | DLCI RX Fecn Count. The total number of Fecns (Forward Explicit Congestion Notification) received on this channel since active. |
| 1.3.6.1.4.1.397.4.2.1.85 | chanStatDlciTxFecn | 0 | 0 | DLCI TX Fecn Count. The total number of Fecns (Forward Explicit Congestion Notification) transmitted on this channel since active. |
| 1.3.6.1.4.1.397.4.2.1.86 | chanStatDlciRxBecn | 0 | 0 | DLCI RX Becn Count. The total number of Becns (Backwards Explicit Congestion Notification) received on this channel since active. |
| 1.3.6.1.4.1.397.4.2.1.87 | chanStatDlciTxBecn | 0 | 0 | DLCI TX Becn Count. The total number of Becns (Backwards Explicit Congestion Notification) transmitted on this channel since acti… |
| 1.3.6.1.4.1.397.4.2.1.88 | chanStatConnectedToControllerIndex | 0 | 0 | Connected to Index. The INDEX of the CONTROLLER that this channel is connected to. |