snSwitchtelnetTimeOut
View at oid-info.com
Time out for the TELNET session. The time could be set in
steps of 10 seconds. Minimum value is 60 seconds, maximum value is 600 seconds.
Parsed from file SN-OSM-PRIV-MIB.mib.txt
Company: None
Module: SN-OSM-PRIV-MIB
Time out for the TELNET session. The time could be set in
steps of 10 seconds. Minimum value is 60 seconds, maximum value is 600 seconds.
Parsed from file SN-OSM-PRIV-MIB.mib
Module: SN-OSM-PRIV-MIB
Vendor: Siemens AG Automation & Drives
Module: SN-OSM-PRIV-MIB
[Automatically extracted from oidview.com]
snSwitchTelnetTimeOut OBJECT-TYPE SYNTAX INTEGER (60..600) ACCESS read-write STATUS mandatory DESCRIPTION "Time out for the TELNET session. The time could be set in steps of 10 seconds. Minimum value is 60 seconds, maximum value is 600 seconds." DEFVAL { 300 } ::= { snGen 11 }
snSwitchTelnetTimeOut OBJECT-TYPE SYNTAX INTEGER (60..600) ACCESS read-write STATUS mandatory DESCRIPTION "Time out for the TELNET session. The time could be set in steps of 10 seconds. Minimum value is 60 seconds, maximum value is 600 seconds." DEFVAL { 300 } ::= { snGen 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.11.0 | snSwitchTelnetTimeOut | 0 | 0 | snSwitchtelnetTimeOut |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.1 | snUserDescription | 1 | 1 | Extended description of the station including user specific information. This value is used for the email From-field. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.2 | snHwVersion | 1 | 1 | The hardware version of the system. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.3 | snBootStrapVersion | 1 | 1 | The firmware version of the boot software installed in the system. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.4 | snSwVersion | 1 | 1 | The firmware version of the system. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.6 | snInfoOrderNr | 1 | 1 | The order number of this product. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.8 | snSerialPortSpeed | 1 | 1 | The serial port speed in bits per second. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.9 | snSwitchTelnetEnable | 1 | 1 | snSwitchtelnetEnable |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.10 | snSwitchTelnetTimeOutEnable | 1 | 1 | snSwitchtelnetTimeOutEnable |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.12 | snSwitchSNMPEnable | 1 | 1 | Determines whether this device may be accessed by SNMP management stations. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.13 | snSysReset | 1 | 1 | Resets the system. cold-reset(1) is identical to Power-On-Reset or Watchdog-Reset. warm-reset(2) is identical to restart command. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.14 | snResetPowerUpCount | 1 | 1 | The number of times the sytem was powered up. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.15 | snSetFactoryDefs | 1 | 1 | Restore factory defaults. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.16 | snResetCounters | 1 | 1 | Reset all statistic counters. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.17 | snEraseDataStoreFlash | 1 | 1 | Erase all configuration data and log table entries. In opposite to reset to factory defaults nothing is saved. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.18 | snSetMemoryDefs | 1 | 1 | Restore memory defaults and restart. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.20 | snEmailSMTPIpAddress | 1 | 1 | IP address or host name of SMTP server. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.21 | snEmailSMTPPort | 1 | 1 | Number of TCP port to which the SMTP server will listen. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.22 | snEmailEnable | 1 | 1 | E-mail functionality for sending a message when an event occurred. |
| 1.3.6.1.4.1.4196.1.1.2.100.1.8.23 | snEmailAddress | 1 | 1 | E-mail address to which messages will be sent. |