filescan MODULE-IDENTITY
ORGANIZATION "Sun Microsystems Inc."
CONTACT-INFO
"Sun Microsystems Inc.
Customer Support
Postal: 901 San Antonio Road
Palo Alto, CA-94303-4900
USA
Tel: 650-960-1300
E-mail: [email protected]"
DESCRIPTION
"The File Scanning allows to monitor files for regular expressions in one of four modes:
Full mode - when ever the file is modified the entire file is scanned.
Incremental - The entire file is scanned only once. Lines added to the end of the file are then scanned as they are appended.
Tail - The existing file contents are not scanned at all. Lines added to the end of file are scanned as they are appended.
Persist Tail - Same as Tail mode except when the agent is restarted, it scans the file starting from the last line examined in the previous scanning.
SNMPv2 uses the term 'context' for the MIBs that can have multiple instances running on the Agent. If you are using a SNMPv2 based thirdparty management station to communicate with such an agent, then make sure that you are using the right context information.
However, if you are using SNMPv1 based management station, then add the context information to the SNMP community as follows '<community>:<context>'
This will enable you to access data from multiple instances of the same module running on an agent."
REVISION "9908031020Z"
DESCRIPTION
"Rev 1.0 3rd august 1999 10:20, Initial version Of MIB."
View at oid-info.com
The File Scanning allows to monitor files for regular expressions
in one of four modes:
Full mode - when ever the file is modified the entire file is
scanned.
Incremental - The entire file is scanned only once. Lines added to
the end of the file are then scanned as they are appended.
Tail - The existing file contents are not scanned at all. Lines
added to the end of file are scanned as they are appended.
Persist Tail - Same as Tail mode except when the agent is restarted, it
scans the file starting from the last line examined in the previous
scanning.
SNMPv2 uses the term 'context' for the MIBs that can have multiple
instances running on the Agent. If you are using a SNMPv2 based
thirdparty management station to communicate with such an agent,
then make sure that you are using the right context information.
However, if you are using SNMPv1 based management station, then
add the context information to the SNMP community as follows
'
This will enable you to access data from multiple instances of
the same module running on an agent.
Parsed from file file-scan.mib.txt
Company: None
Module: FSCAN-SUNMANAGEMENTCENTER-MIB
The File Scanning allows to monitor files for regular expressions
in one of four modes:
Full mode - when ever the file is modified the entire file is
scanned.
Incremental - The entire file is scanned only once. Lines added to
the end of the file are then scanned as they are appended.
Tail - The existing file contents are not scanned at all. Lines
added to the end of file are scanned as they are appended.
Persist Tail - Same as Tail mode except when the agent is restarted, it
scans the file starting from the last line examined in the previous
scanning.
SNMPv2 uses the term 'context' for the MIBs that can have multiple
instances running on the Agent. If you are using a SNMPv2 based
thirdparty management station to communicate with such an agent,
then make sure that you are using the right context information.
However, if you are using SNMPv1 based management station, then
add the context information to the SNMP community as follows
'
This will enable you to access data from multiple instances of
the same module running on an agent.
Parsed from file MODULES-SUNMANAGEMENTCENTER-MIB.mib
Module: MODULES-SUNMANAGEMENTCENTER-MIB
Automatically extracted from www.mibdepot.com.
filescan MODULE-IDENTITY LAST-UPDATED "9908031020Z" ORGANIZATION "Sun Microsystems Inc." CONTACT-INFO " Sun Microsystems Inc. Customer Support Postal: 901 San Antonio Road Palo Alto, CA-94303-4900 USA Tel: 650-960-1300 E-mail: [email protected]" DESCRIPTION "The File Scanning allows to monitor files for regular expressions in one of four modes: Full mode - when ever the file is modified the entire file is scanned. Incremental - The entire file is scanned only once. Lines added to the end of the file are then scanned as they are appended. Tail - The existing file contents are not scanned at all. Lines added to the end of file are scanned as they are appended. Persist Tail - Same as Tail mode except when the agent is restarted, it scans the file starting from the last line examined in the previous scanning. SNMPv2 uses the term 'context' for the MIBs that can have multiple instances running on the Agent. If you are using a SNMPv2 based thirdparty management station to communicate with such an agent, then make sure that you are using the right context information. However, if you are using SNMPv1 based management station, then add the context information to the SNMP community as follows '
: ' This will enable you to access data from multiple instances of the same module running on an agent." REVISION "9908031020Z" DESCRIPTION "Rev 1.0 3rd august 1999 10:20, Initial version Of MIB." ::= { modules 24 }
fscan OBJECT IDENTIFIER ::= { modules 24 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.42.2.12.2.2.24.1 | fsFileScanGroup | 3 | 24 | This node IS NOT DESCRIBED YET |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.42.2.12.2.2.1 | hardware | 1 | 1417 | None |
1.3.6.1.4.1.42.2.12.2.2.2 | operatingSystem | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.3 | localApplication | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.4 | remoteSystem | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.5 | serverSupport | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.10 | dr | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.11 | healthMonitor | 8 | 49 | Health Monitor allows to monitor the overall state of the machine, including the state of the disk, networks, RAM, and so on. Thi… |
1.3.6.1.4.1.42.2.12.2.2.12 | kernelReader | 11 | 466 | KERNEL-READER-SUNMANAGEMENTCENTER-MIB |
1.3.6.1.4.1.42.2.12.2.2.13 | processDetails | 1 | 26 | The solaris process detail allows to monitor the top 10,20,50 processes that are CPU/Memory intensive. This criteria is part of … |
1.3.6.1.4.1.42.2.12.2.2.14 | mib2Proxy | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.15 | dtable | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.16 | kernelReaderSimple | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.17 | hdreg | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.18 | a5x00 | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.19 | t300 | 22 | 175 | None |
1.3.6.1.4.1.42.2.12.2.2.20 | processMonitor, processTable | 1 | 33 | PROCESS-MONITOR-SUNMANAGEMENTCENTER-MIB |
1.3.6.1.4.1.42.2.12.2.2.21 | datalogRegistry | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.22 | dirmon | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.23 | filemon | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.25 | hpJetdirect | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.27 | nfsmon | 1 | 11 | NFSMON-SUNMANAGEMENTCENTER-MIB2 |
1.3.6.1.4.1.42.2.12.2.2.28 | nfsstat | 1 | 37 | NFSSTAT-SUNMANAGEMENTCENTER-MIB2 |
1.3.6.1.4.1.42.2.12.2.2.29 | printSpool | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.30 | agentStats | 5 | 30 | None |
1.3.6.1.4.1.42.2.12.2.2.31 | domainControl | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.32 | topologyLicense | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.33 | topology | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.34 | cfgserver | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.35 | eventmgr | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.36 | toolAdhocs | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.37 | printSpool, printSpoolv3 | 2 | 19 | PRINT-SPOOL-SUNMANAGEMENTCENTER-MIB2 |
1.3.6.1.4.1.42.2.12.2.2.38 | discovery | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.39 | ipv6 | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.40 | agent-update | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.45 | altpath | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.46 | metadataManager | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.47 | logview | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.48 | mcp | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.49 | builder | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.51 | dr-serengeti | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.52 | em | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.53 | crashdump | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.54 | filewch | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.55 | patchmgt | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.56 | scriptLauncher | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.57 | scriptRepository | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.58 | httpST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.59 | ftpST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.60 | telnetST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.61 | dnsST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.62 | nisST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.63 | ldapST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.64 | smtpST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.65 | imapST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.66 | popST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.67 | calendarST | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.68 | httpSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.69 | ftpSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.70 | telnetSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.71 | dnsSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.72 | nisSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.73 | ldapSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.74 | smtpSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.75 | imapSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.76 | popSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.77 | calendarSE | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.78 | edot | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.81 | pkgchk | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.82 | patchadmin | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.88 | perftool | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.89 | ichange | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.90 | v880-dr | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.100 | serengeti-platadmin | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.101 | serengeti-rules | 0 | 0 | None |
1.3.6.1.4.1.42.2.12.2.2.199 | trapList | 0 | 0 | Trap defns for SMC, taken from the SMC 3.0 DE manual and put into a valid MIB format. |
1.3.6.1.4.1.42.2.12.2.2.200 | cod | 0 | 0 | None |