The current system boot mode.
Parsed from file SUN-T300-MIB.mib
Module: SUN-T300-MIB
Vendor: Sun Microsystems
Module: SUN-T300-MIB
[Automatically extracted from oidview.com]
sysBootMode OBJECT-TYPE SYNTAX INTEGER { none(1), auto(2), tftp(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current system boot mode." ::= { t300SystemObjs 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.42.2.28.2.2.1.1 | sysId | 0 | 0 | The system name. |
1.3.6.1.4.1.42.2.28.2.2.1.2 | sysVendor | 0 | 0 | The system vendor. |
1.3.6.1.4.1.42.2.28.2.2.1.3 | sysModel | 0 | 0 | The system model. |
1.3.6.1.4.1.42.2.28.2.2.1.4 | sysRevision | 0 | 0 | The system firmware revision. |
1.3.6.1.4.1.42.2.28.2.2.1.5 | sysStripeUnitSize | 0 | 0 | The current system stripe unit size. |
1.3.6.1.4.1.42.2.28.2.2.1.6 | sysCacheMode | 0 | 0 | The current system buffer cache mode. |
1.3.6.1.4.1.42.2.28.2.2.1.7 | sysCacheMirror | 0 | 0 | The current system buffer cache mirror mode. |
1.3.6.1.4.1.42.2.28.2.2.1.8 | sysAutoDisable | 0 | 0 | The current system auto-disable/reconstruct policy. |
1.3.6.1.4.1.42.2.28.2.2.1.9 | sysMpSupport | 0 | 0 | The current multi-pathing support mode. |
1.3.6.1.4.1.42.2.28.2.2.1.10 | sysReadAhead | 0 | 0 | The number of consecutive contiguous read commands received before triggering read-ahead. |
1.3.6.1.4.1.42.2.28.2.2.1.11 | sysReconRate | 0 | 0 | A value controlling the amount of bandwidth allocated to disk reconstruction. |
1.3.6.1.4.1.42.2.28.2.2.1.12 | sysOndgMode | 0 | 0 | The current on-line loop diagnostic mode. |
1.3.6.1.4.1.42.2.28.2.2.1.13 | sysOndgTimeslice | 0 | 0 | The time-slice in seconds devoted to normal I/O between loop diagnostic data pattern I/O. |
1.3.6.1.4.1.42.2.28.2.2.1.14 | sysIdleDiskTimeout | 0 | 0 | The number of hours (1-24) that a disk is permitted to be idle before the system automatically performs a seek on that disk. |
1.3.6.1.4.1.42.2.28.2.2.1.15 | sysFruRemovalShutdown | 0 | 0 | The number of seconds remaining before the system automatically shuts down due to a FRU being removed and not replaced. |
1.3.6.1.4.1.42.2.28.2.2.1.17 | sysBootDelay | 0 | 0 | A time delay in seconds during which time a user could strike a key at the system console to interrupt EPROM boot process. |
1.3.6.1.4.1.42.2.28.2.2.1.18 | sysSpinDelay | 0 | 0 | Not in use. |
1.3.6.1.4.1.42.2.28.2.2.1.19 | sysTftpHost | 0 | 0 | When boot mode is 'tftp', specifies the IP address of the tftp server. |
1.3.6.1.4.1.42.2.28.2.2.1.20 | sysTftpFile | 0 | 0 | When boot mode is 'tftp', specifies the file name to read from the tftp server. |
1.3.6.1.4.1.42.2.28.2.2.1.21 | sysIpAddr | 0 | 0 | The IP address of the system. |
1.3.6.1.4.1.42.2.28.2.2.1.22 | sysSubNet | 0 | 0 | The subnet mask of the system. |
1.3.6.1.4.1.42.2.28.2.2.1.23 | sysGateway | 0 | 0 | The default gateway IP address. |
1.3.6.1.4.1.42.2.28.2.2.1.24 | sysWriteRequests | 0 | 0 | The current number of write requests received from all host ports. |
1.3.6.1.4.1.42.2.28.2.2.1.25 | sysReadRequests | 0 | 0 | The current number of read requests received from all host ports. |
1.3.6.1.4.1.42.2.28.2.2.1.26 | sysBlocksWritten | 0 | 0 | The current number of blocks written (received from) all host ports. |
1.3.6.1.4.1.42.2.28.2.2.1.27 | sysBlocksRead | 0 | 0 | The current number of blocks read (transmitted to) all host ports. |
1.3.6.1.4.1.42.2.28.2.2.1.28 | sysCacheWriteHits | 0 | 0 | The current number of blocks in the cache re-written before the previous contents have been written to disk. |
1.3.6.1.4.1.42.2.28.2.2.1.29 | sysCacheWriteMisses | 0 | 0 | The current number of new blocks written to the cache. |
1.3.6.1.4.1.42.2.28.2.2.1.30 | sysCacheReadHits | 0 | 0 | The current number of blocks read from cache. |
1.3.6.1.4.1.42.2.28.2.2.1.31 | sysCacheReadMisses | 0 | 0 | The current number of blocks read from disk into the cache. |
1.3.6.1.4.1.42.2.28.2.2.1.32 | sysCacheRmwFlushes | 0 | 0 | The current number of read-modify-write stripe operations executed by cache flush. |
1.3.6.1.4.1.42.2.28.2.2.1.33 | sysCacheReconFlushes | 0 | 0 | The current number of reconstruct-write stripe operations executed by cache flush. |
1.3.6.1.4.1.42.2.28.2.2.1.34 | sysCacheStripeFlushes | 0 | 0 | The current number of strip-write stripe operations executed by cache flush. |
1.3.6.1.4.1.42.2.28.2.2.1.35 | sysTimezone | 0 | 0 | Specifies the timezone offset, the difference between local time and universal time (UTC). |
1.3.6.1.4.1.42.2.28.2.2.1.36 | sysDate | 0 | 0 | A string of the form 'YYYYMMDD'. |
1.3.6.1.4.1.42.2.28.2.2.1.37 | sysTime | 0 | 0 | A string of the form 'HHMMSS'. |
1.3.6.1.4.1.42.2.28.2.2.1.38 | sysRootSession | 0 | 0 | Not in use. |
1.3.6.1.4.1.42.2.28.2.2.1.39 | sysGuestSession | 0 | 0 | Not in use. |
1.3.6.1.4.1.42.2.28.2.2.1.40 | sysLastMessage | 0 | 0 | Last syslog message. Used for Trap only. |
1.3.6.1.4.1.42.2.28.2.2.1.41 | sysRarpEnabled | 0 | 0 | A flag indicating whether RARP protocol is used to obtain the system IP address. |
1.3.6.1.4.1.42.2.28.2.2.1.42 | sysLoop1Split | 0 | 0 | A flag indicating whether Loop 1 can be split into two segments. |
1.3.6.1.4.1.42.2.28.2.2.1.43 | sysLastRestart | 0 | 0 | The date and time of the last system restart. |
1.3.6.1.4.1.42.2.28.2.2.1.44 | sysCtime | 0 | 0 | The current date and time. |
1.3.6.1.4.1.42.2.28.2.2.1.45 | sysHasVolumes | 0 | 0 | A flag indicating whether or not there are any currently created volumes. |