An entry in the t1e1Table.
Parsed from file ds8200.mib.txt
Company: None
Module: INTERFACES-MIB
An entry in the t1e1Table.
Parsed from file INTERFACES-MIB.mib
Module: INTERFACES-MIB
Vendor: TxPort
Module: INTERFACES-MIB
[Automatically extracted from oidview.com]
t1e1ConfigTableEntry OBJECT-TYPE SYNTAX T1e1ConfigTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the t1e1Table." INDEX { t1e1ConfigNearIndex, t1e1ConfigFarIndex, t1e1ConfigIndex } ::= { t1e1ConfigTable 1 }
t1e1ConfigTableEntry OBJECT-TYPE SYNTAX T1e1ConfigTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the t1e1Table." INDEX { t1e1ConfigNearIndex, t1e1ConfigFarIndex, t1e1ConfigIndex } ::= { t1e1ConfigTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.425.8.3.1.1.1 | t1e1ConfigNearIndex | 0 | 0 | Selects the near device. |
1.3.6.1.4.1.425.8.3.1.1.2 | t1e1ConfigFarIndex | 0 | 0 | Selects the far device. |
1.3.6.1.4.1.425.8.3.1.1.3 | t1e1ConfigIndex | 0 | 0 | This object is the index into the t1e1Table. |
1.3.6.1.4.1.425.8.3.1.1.4 | t1e1Description | 0 | 0 | Contains a textual description of the port. |
1.3.6.1.4.1.425.8.3.1.1.5 | t1e1Mode | 0 | 0 | This object identifies the port as either a Network (long-haul) or DTE (short-haul) port. |
1.3.6.1.4.1.425.8.3.1.1.6 | t1e1FrameType | 0 | 0 | Selects the framing for the network side of the DSU/CSU. |
1.3.6.1.4.1.425.8.3.1.1.7 | t1e1LineCode | 0 | 0 | Selects the network side line coding. |
1.3.6.1.4.1.425.8.3.1.1.8 | t1e1LineBuildOut | 0 | 0 | Selects the line build out for the network interface. The options are: t1e1LineBuildOut0db indicates a line build out of 0d… |
1.3.6.1.4.1.425.8.3.1.1.9 | t1e1Timing | 0 | 0 | Sets the timing source to synchronize the unit's internal timing generators. |
1.3.6.1.4.1.425.8.3.1.1.10 | t1e1StationInTiming | 0 | 0 | Selects the input timing if t1e1Timing is set to Station. |
1.3.6.1.4.1.425.8.3.1.1.11 | t1e1StationTiming | 0 | 0 | Selects the N-multiple when Station Input Timing is set to either NX56 or NX65. The N range is 1..24 |
1.3.6.1.4.1.425.8.3.1.1.12 | t1e1PRM | 0 | 0 | Enables the ANSI T1.403 Performance Report Message functions. |
1.3.6.1.4.1.425.8.3.1.1.13 | t1e1ZeroSuppress | 0 | 0 | Determines whether ones density insertion is activated after 15 zeros . To ensure compliance with TR54016, this field must be … |
1.3.6.1.4.1.425.8.3.1.1.14 | t1e1NationalBit | 0 | 0 | Selects a national bit to create a 4-kpbs datalink between the endpoint units. |
1.3.6.1.4.1.425.8.3.1.1.15 | t1e1KeepAlive | 0 | 0 | Selects keep alive framed and unframed ones when the unit detects LOS or OOF. |
1.3.6.1.4.1.425.8.3.1.1.16 | t1e1CRC4Mode | 0 | 0 | Selects whether CRC4 is enabled or disabled. |
1.3.6.1.4.1.425.8.3.1.1.17 | t1e1DSXLevel | 0 | 0 | Selects the DSX1 interface output level. |
1.3.6.1.4.1.425.8.3.1.1.18 | t1e1CRC | 0 | 0 | Determines whether received CRC data is passed through or regenerated. |
1.3.6.1.4.1.425.8.3.1.1.19 | t1e1FDLPassThrough | 0 | 0 | Determines whether the ESF FDL passes through the CSU or terminates. |
1.3.6.1.4.1.425.8.3.1.1.20 | t1e1AudibleAlarm | 0 | 0 | If applicable, Enables or Disables the CSU's internal buzzer which alerts users of an alarm condition. |