An entry in the t1e1Table.
Parsed from file ds8200.mib.txt
Company: None
Module: INTERFACES-MIB
An entry in the t1e1Table.
Parsed from file INTERFACES-MIB.mib
Module: INTERFACES-MIB
Vendor: TxPort
Module: INTERFACES-MIB
[Automatically extracted from oidview.com]
t1e1AlarmTableEntry OBJECT-TYPE SYNTAX T1e1AlarmTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the t1e1Table." INDEX { t1e1AlarmNearIndex, t1e1AlarmFarIndex, t1e1AlarmIndex } ::= { t1e1AlarmTable 1 }
t1e1AlarmTableEntry OBJECT-TYPE SYNTAX T1e1AlarmTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the t1e1Table." INDEX { t1e1AlarmNearIndex, t1e1AlarmFarIndex, t1e1AlarmIndex } ::= { t1e1AlarmTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.425.8.3.2.1.1 | t1e1AlarmNearIndex | 0 | 0 | Selects the near device. |
1.3.6.1.4.1.425.8.3.2.1.2 | t1e1AlarmFarIndex | 0 | 0 | Selects the far device. |
1.3.6.1.4.1.425.8.3.2.1.3 | t1e1AlarmIndex | 0 | 0 | This object is the index into the t1e1Table. |
1.3.6.1.4.1.425.8.3.2.1.4 | t1e1StatusSummary | 0 | 0 | This object provides a summary of the port status. |
1.3.6.1.4.1.425.8.3.2.1.5 | t1e1AlarmSummary | 0 | 0 | This object provides a summary of the port alarms. |
1.3.6.1.4.1.425.8.3.2.1.6 | t1e1ESStatus | 0 | 0 | Reports if a Errorred Seconds condition exists. |
1.3.6.1.4.1.425.8.3.2.1.7 | t1e1ESCount | 0 | 0 | This count contains the number of consecutive seconds an Errored Seconds condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.8 | t1e1ESThreshold | 0 | 0 | Sets the Errored Seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value i… |
1.3.6.1.4.1.425.8.3.2.1.9 | t1e1ESAlarm | 0 | 0 | This status indicates if the Errors Seconds threshold is exceeded. |
1.3.6.1.4.1.425.8.3.2.1.10 | t1e1SESStatus | 0 | 0 | Reports if a Severely Errorred condition exists. |
1.3.6.1.4.1.425.8.3.2.1.11 | t1e1SESCount | 0 | 0 | This count contains the number of consecutive seconds a Severely Errored condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.12 | t1e1SESThreshold | 0 | 0 | Sets the Severely Errored seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to an… |
1.3.6.1.4.1.425.8.3.2.1.13 | t1e1SESAlarm | 0 | 0 | This status indicates if the Severely Errors Seconds threshold is exceeded. |
1.3.6.1.4.1.425.8.3.2.1.14 | t1e1LOSSStatus | 0 | 0 | Reports if a Loss of Signal condition exists. |
1.3.6.1.4.1.425.8.3.2.1.15 | t1e1LOSSCount | 0 | 0 | This count contains the number of consecutive seconds a Loss of Signal condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.16 | t1e1LOSSThreshold | 0 | 0 | Sets the Loss of Signal seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any … |
1.3.6.1.4.1.425.8.3.2.1.17 | t1e1LOSSAlarm | 0 | 0 | This status indicates if the Loss of Signal Seconds threshold is exceeded. |
1.3.6.1.4.1.425.8.3.2.1.18 | t1e1UASStatus | 0 | 0 | Reports if an Unavailable condition exists. |
1.3.6.1.4.1.425.8.3.2.1.19 | t1e1UASCount | 0 | 0 | This count contains the number of consecutive seconds an Unavailable condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.20 | t1e1UASThreshold | 0 | 0 | Sets the unavailable seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any val… |
1.3.6.1.4.1.425.8.3.2.1.21 | t1e1UASAlarm | 0 | 0 | This status indicates if the Unavailable Seconds threshold is exceeded. |
1.3.6.1.4.1.425.8.3.2.1.22 | t1e1CSSStatus | 0 | 0 | Reports if a Controlled Slip condition exists. |
1.3.6.1.4.1.425.8.3.2.1.23 | t1e1CSSCount | 0 | 0 | This count contains the number of consecutive seconds in which at least one Controlled Slip occurred. |
1.3.6.1.4.1.425.8.3.2.1.24 | t1e1CSSThreshold | 0 | 0 | Sets the Controlled Slip seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any… |
1.3.6.1.4.1.425.8.3.2.1.25 | t1e1CSSAlarm | 0 | 0 | This status indicates if the Controlled Slip seconds threshold is exceeded. |
1.3.6.1.4.1.425.8.3.2.1.26 | t1e1BPVSStatus | 0 | 0 | Reports if a Bipolar Violation Error condition exists. |
1.3.6.1.4.1.425.8.3.2.1.27 | t1e1BPVSCount | 0 | 0 | This count contains the number of consecutive seconds a Bipolar Violation Error condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.28 | t1e1BPVSThreshold | 0 | 0 | Sets the Bipolar Violation Error seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be se… |
1.3.6.1.4.1.425.8.3.2.1.29 | t1e1BPVSAlarm | 0 | 0 | This status indicates if the Bipolar Violation Error seconds threshold is exceeded. |
1.3.6.1.4.1.425.8.3.2.1.30 | t1e1OOFSStatus | 0 | 0 | Indicates that the unit is unable to synchronize on the incoming framing pattern. |
1.3.6.1.4.1.425.8.3.2.1.31 | t1e1OOFSCount | 0 | 0 | This count contains the number of consecutive seconds an OOF condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.32 | t1e1OOFSThreshold | 0 | 0 | Sets the OOF seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in th… |
1.3.6.1.4.1.425.8.3.2.1.33 | t1e1OOFSAlarm | 0 | 0 | Indicates if an OOF seconds alarm condition exists. |
1.3.6.1.4.1.425.8.3.2.1.34 | t1e1AISStatus | 0 | 0 | Indicates that the unit is receiving an unframed all ones pattern. |
1.3.6.1.4.1.425.8.3.2.1.35 | t1e1AISCount | 0 | 0 | This count contains the number of consecutive seconds an Unframed All Ones condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.36 | t1e1AISThreshold | 0 | 0 | Sets the AIS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in th… |
1.3.6.1.4.1.425.8.3.2.1.37 | t1e1AISAlarm | 0 | 0 | Indicates if an Unframed All Ones alarm condition exists. |
1.3.6.1.4.1.425.8.3.2.1.38 | t1e1RASStatus | 0 | 0 | Reports if a Remote (Yellow) Alarm condition exists. |
1.3.6.1.4.1.425.8.3.2.1.39 | t1e1RASCount | 0 | 0 | This count contains the number of consecutive seconds a Remote (Yellow) Alarm condition has existed. |
1.3.6.1.4.1.425.8.3.2.1.40 | t1e1RASThreshold | 0 | 0 | Sets the RAS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in th… |
1.3.6.1.4.1.425.8.3.2.1.41 | t1e1RASAlarm | 0 | 0 | This status indicates if a Remote (Yellow) Alarm exists. |
1.3.6.1.4.1.425.8.3.2.1.42 | t1e1AlarmResetTimer | 0 | 0 | Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900. |
1.3.6.1.4.1.425.8.3.2.1.43 | t1e1AlarmReset | 0 | 0 | This is used to clear the current alarm counts. |