An entry in the Analog DTE Table.
Parsed from file ds8200.mib.txt
Company: None
Module: INTERFACES-MIB
An entry in the Analog DTE Table.
Parsed from file INTERFACES-MIB.mib
Module: INTERFACES-MIB
Vendor: TxPort
Module: INTERFACES-MIB
[Automatically extracted from oidview.com]
analogDteTableEntry OBJECT-TYPE SYNTAX AnalogDteTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Analog DTE Table." INDEX { analogDteNearIndex, analogDteFarIndex, analogDteIndex } ::= { analogDteTable 1 }
analogDteTableEntry OBJECT-TYPE SYNTAX AnalogDteTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Analog DTE Table." INDEX { analogDteNearIndex, analogDteFarIndex, analogDteIndex } ::= { analogDteTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.425.8.6.1.1.1 | analogDteNearIndex | 0 | 0 | Selects the near device. |
1.3.6.1.4.1.425.8.6.1.1.2 | analogDteFarIndex | 0 | 0 | Selects the far device. |
1.3.6.1.4.1.425.8.6.1.1.3 | analogDteIndex | 0 | 0 | Index into the analogDteTable. |
1.3.6.1.4.1.425.8.6.1.1.4 | analogDteDescription | 0 | 0 | Contains a textual description of the port. |
1.3.6.1.4.1.425.8.6.1.1.5 | analogDteCardType | 0 | 0 | Identifies the analog DTE card type. |
1.3.6.1.4.1.425.8.6.1.1.6 | analogDteMode | 0 | 0 | Selects whether the port is actively assigned to a netowrk channel or not used. |
1.3.6.1.4.1.425.8.6.1.1.7 | analogDteState | 0 | 0 | Displays the port status as either in the Busy or Idle state. |
1.3.6.1.4.1.425.8.6.1.1.8 | analogDteElementID | 0 | 0 | This object signifies the name of the device. |
1.3.6.1.4.1.425.8.6.1.1.9 | analogDteSignalling | 0 | 0 | Selects the supervisory operation of the port. |
1.3.6.1.4.1.425.8.6.1.1.10 | analogDteDNISDelay | 0 | 0 | If the signalling mode has a delay, it can be set from 1 to 5 seconds. |
1.3.6.1.4.1.425.8.6.1.1.11 | analogDteTxGain | 0 | 0 | Selects the transmit gain. Values prefixed with m are negative. |
1.3.6.1.4.1.425.8.6.1.1.12 | analogDteRxGain | 0 | 0 | Selects the receive gain. Values prefixed with m are negative. |