Call control parameters for a modem. These define the
sequence of operation related to how a call is negotiated.
Parsed from file HDM.MIB.txt
Company: cai
Module: HDM-MIB
Vendor: 3Com
Module: HDM-MIB (HDM.MIB)
Type: ENTRY
Access: not-accessible
Syntax: HdmCcEntry
Automatically extracted from www.mibdepot.com
hdmCcEntry OBJECT-TYPE SYNTAX HdmCcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Call control parameters for a modem. These define the sequence of operation related to how a call is negotiated." INDEX { hdmCcIndex, hdmCcIndex2 } ::= { hdmCcTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.22.4.1.1.1 | hdmCcIndex | 0 | 0 | The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index… |
| 1.3.6.1.4.1.429.1.22.4.1.1.2 | hdmCcIndex2 | 0 | 0 | The Secondary index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of… |
| 1.3.6.1.4.1.429.1.22.4.1.1.3 | hdmCcDialDelay | 0 | 0 | Defines the number of seconds the modem waits between going off hook and begining to dial. Ignored when result code options 2,4,… |
| 1.3.6.1.4.1.429.1.22.4.1.1.4 | hdmCcWaitForCarrier | 0 | 0 | Defines the number of seconds the modem will wait for a carrier signal after dialing. Default=60. |
| 1.3.6.1.4.1.429.1.22.4.1.1.5 | hdmCcInactivityTimer | 0 | 0 | Sets the duration (in seconds) that the modem will maintain a connection when there is no activity on the phone line. The feature… |
| 1.3.6.1.4.1.429.1.22.4.1.1.6 | hdmCcQuietResultCodes | 0 | 0 | Determines whether or not the modem transmits result codes to the DTE. Default=noResult(2). |
| 1.3.6.1.4.1.429.1.22.4.1.1.7 | hdmCcResponseMode | 0 | 0 | Determines whether the modem transmits result codes in the verbal or numeric mode. Default=verbal(2). |
| 1.3.6.1.4.1.429.1.22.4.1.1.8 | hdmCcResultCodeOptions | 0 | 0 | Defines one of eight result code subsets and also defines indirectly how the modem reacts to dial tone etc. Equates to the modem… |
| 1.3.6.1.4.1.429.1.22.4.1.1.9 | hdmCcArqResultCodeMode | 0 | 0 | Defines whether or not the ARQ result codes are sent to the DTE on connection(if result codes are enabled). Default=arqResultsEna… |
| 1.3.6.1.4.1.429.1.22.4.1.1.10 | hdmCcEscCodeRsp | 0 | 0 | Defines the action of the modem in response to the escape code(+++). The default value is determined by the state of Dip switch … |
| 1.3.6.1.4.1.429.1.22.4.1.1.11 | hdmCcAtRecognition | 0 | 0 | Determines which, if any, AT commands the modem will recognize or accept from the DTE. Default=enableAll(3). |
| 1.3.6.1.4.1.429.1.22.4.1.1.12 | hdmCcV32ToneDuration | 0 | 0 | Specifies the duration (in 10ths of a second) that the modem transmits the 3000/600 Hz answer tones for V.32 handshaking. A sett… |
| 1.3.6.1.4.1.429.1.22.4.1.1.14 | hdmCcAutoAnswer | 0 | 0 | Determines the number of rings that the modem will answer calls on. When set to 0 the modem can only originate calls. Default=1. |
| 1.3.6.1.4.1.429.1.22.4.1.1.15 | hdmCcAnswerInOrigMode | 0 | 0 | When enabled the modem will answer calls using the sequence normaly used by the originating modem. Default=disable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.16 | hdmCcPhoneString0 | 0 | 0 | Phone number stored in modem's non volitile memory. Useful in providing quick access to frequently called numbers. In addition … |
| 1.3.6.1.4.1.429.1.22.4.1.1.17 | hdmCcPhoneString1 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful for providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.22.4.1.1.18 | hdmCcPhoneString2 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.22.4.1.1.19 | hdmCcPhoneString3 | 0 | 0 | Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers. |
| 1.3.6.1.4.1.429.1.22.4.1.1.20 | hdmCcErrorCntlMode | 0 | 0 | Defines if the modem is operating in synchronous or asynchronous mode and how it responds relative to negotiation of error contro… |
| 1.3.6.1.4.1.429.1.22.4.1.1.21 | hdmCcMnpWith1200 | 0 | 0 | Determines if the modem will include MNP/V42 negotiation on 1200 bps connections. Default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.22 | hdmCcMnpWith2400 | 0 | 0 | Determines if the modem will include MNP/V43 negotiation on 2400 bps calls. default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.23 | hdmCcMnpWithV32 | 0 | 0 | Determines if the modem will include MNP/V42 negotiation on V.32 connections. Default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.24 | hdmCcMnpTimeout | 0 | 0 | Specifies the MNP/V42 link request timeout for negotiation of 1200 and 2400 bps calls. Default=5. |
| 1.3.6.1.4.1.429.1.22.4.1.1.25 | hdmCcV21V23FallBackTimer | 0 | 0 | V21/V23 fallback timer, 1/10 sec. NVRAM S Register S29. Default=20 |
| 1.3.6.1.4.1.429.1.22.4.1.1.26 | hdmCcAddnlAnswToneDur | 0 | 0 | Additional answer tone duration, 1/10 sec. NVRAM S Register S49. Default=16. |
| 1.3.6.1.4.1.429.1.22.4.1.1.27 | hdmCcBillingDelayPeriod | 0 | 0 | Billing Delay Period. 1/50 sec. NVRAM S Register S50. Default=100. |
| 1.3.6.1.4.1.429.1.22.4.1.1.28 | hdmCcCarrierAccessCode1 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits (e.g. 9501755). This is … |
| 1.3.6.1.4.1.429.1.22.4.1.1.29 | hdmCcCarrierAccessCode2 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 2nd of 3 C… |
| 1.3.6.1.4.1.429.1.22.4.1.1.30 | hdmCcCarrierAccessCode3 | 0 | 0 | The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 3rd of 3 CA… |
| 1.3.6.1.4.1.429.1.22.4.1.1.31 | hdmCcCallingInitStr1 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This string is a configuration string of 1 to 30 characters (e.g. &… |
| 1.3.6.1.4.1.429.1.22.4.1.1.32 | hdmCcCallingInitStr2 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This string is 1 to 30 characters. It does NOT include the AT atten… |
| 1.3.6.1.4.1.429.1.22.4.1.1.33 | hdmCcCallingInitStr3 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT… |
| 1.3.6.1.4.1.429.1.22.4.1.1.34 | hdmCcCallingInitStr4 | 0 | 0 | This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT… |
| 1.3.6.1.4.1.429.1.22.4.1.1.35 | hdmCcT1CallSetupProc | 0 | 0 | Determines T1 call setup procedures used. Choices are 'normal' or 'none'. None assumes a dedicated (leased) DS0 assigned to the… |
| 1.3.6.1.4.1.429.1.22.4.1.1.36 | hdmCcT1KpStMfTones | 0 | 0 | hdmCcT1KpStMftones |
| 1.3.6.1.4.1.429.1.22.4.1.1.37 | hdmCcT1CallInitStrUse | 0 | 0 | Determines if calling init strings are used or not. Default=enable(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.38 | hdmCcT1CallInitStrBase | 0 | 0 | Determines if the calling init strings are based upon DNIS or ANI. Default=dnisBase(1). |
| 1.3.6.1.4.1.429.1.22.4.1.1.39 | hdmCcT1DialInAniDig | 0 | 0 | Sets the number of ANI digits allowed in incoming calls. Default = 0. |
| 1.3.6.1.4.1.429.1.22.4.1.1.40 | hdmCcT1DialInDnisDig | 0 | 0 | Sets the number of DNIS/DID digits allowed in incoming calls. Default = 0. |
| 1.3.6.1.4.1.429.1.22.4.1.1.41 | hdmCcDataOverVoice | 0 | 0 | Data Over Voice support. |
| 1.3.6.1.4.1.429.1.22.4.1.1.42 | hdmCc2100AnswerTone | 0 | 0 | 2100 Hz Answer Tone for DOVBS. |
| 1.3.6.1.4.1.429.1.22.4.1.1.43 | hdmCcEnableV120v42Bis | 0 | 0 | V.42bis Compression over V.120. |