The logical identifier for this network assigned by the Pilgrim
forwarder process which owns this network. The value of the
LogicalId is returned to the Config Process in the
FWD_ENABLE_NETWORK_RSP IPC message.
Parsed from file USR-CONFIG-MIB.mib.txt
Company: None
Module: USR-CONFIG-MIB
The logical identifier for this network assigned by the Pilgrim
forwarder process which owns this network. The value of the
LogicalId is returned to the Config Process in the
FWD_ENABLE_NETWORK_RSP IPC message.
Parsed from file USR-CONFIG-MIB.mib
Module: USR-CONFIG-MIB
Vendor: UTStarcom Incorporated
Module: USR-CONFIG-MIB
[Automatically extracted from oidview.com]
usrCfgNetLogicalId OBJECT-TYPE SYNTAX UsrNetLogicalId MAX-ACCESS read-only STATUS current DESCRIPTION "The logical identifier for this network assigned by the Pilgrim forwarder process which owns this network. The value of the LogicalId is returned to the Config Process in the FWD_ENABLE_NETWORK_RSP IPC message." ::= { usrCfgNetEntry 7 }
usrCfgNetLogicalId OBJECT-TYPE SYNTAX UsrNetLogicalId MAX-ACCESS read-only STATUS current DESCRIPTION "The logical identifier for this network assigned by the Pilgrim forwarder process which owns this network. The value of the LogicalId is returned to the Config Process in the FWD_ENABLE_NETWORK_RSP IPC message." ::= { usrCfgNetEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.1.7.1.1 | usrCfgNetName | 0 | 0 | The name of this network. Network names can either be assigned by a network administrator when the Network is created. Or it wil… |
| 1.3.6.1.4.1.429.4.1.7.1.2 | usrCfgNetIfName | 0 | 0 | The name of the interface this network runs on top of. |
| 1.3.6.1.4.1.429.4.1.7.1.3 | usrCfgNetProtoType | 0 | 0 | The Level 3 protocol running over this network. |
| 1.3.6.1.4.1.429.4.1.7.1.4 | usrCfgNetAddress | 0 | 0 | The address which identifies the network. The format of this object is dependent on the protocol running on this network. |
| 1.3.6.1.4.1.429.4.1.7.1.5 | usrCfgNetEncapType | 0 | 0 | The type of encapsulation employed by this network. |
| 1.3.6.1.4.1.429.4.1.7.1.6 | usrCfgNetStatus | 0 | 0 | The current status of the network entry. The value of this object can be set to one of four values, 'enable', 'disable', 'invalid… |
| 1.3.6.1.4.1.429.4.1.7.1.8 | usrCfgNetType | 0 | 0 | Networks configured via network management interaction are static networks. Networks created to service incoming calls are dynami… |
| 1.3.6.1.4.1.429.4.1.7.1.9 | usrCfgNetUserName | 0 | 0 | The name of a user (location) associated with a dedicated circuit type network. This object's value is only meaningful for Data … |
| 1.3.6.1.4.1.429.4.1.7.1.10 | usrCfgNetCFMStatusFlag | 0 | 0 | Setting the value of this object to `save' causes the values of this Network Table entry to be written out to the current config … |
| 1.3.6.1.4.1.429.4.1.7.1.11 | usrCfgNewNetIfName | 0 | 0 | The name of the interface this network runs on top of. |
| 1.3.6.1.4.1.429.4.1.7.1.12 | usrCfgNewNetAddress | 0 | 0 | The address which identifies the network. The format of this object is dependent on the protocol running on this network. |
| 1.3.6.1.4.1.429.4.1.7.1.13 | usrCfgNewNetEncapType | 0 | 0 | The type of encapsulation employed by this network. |
| 1.3.6.1.4.1.429.4.1.7.1.14 | usrCfgNetRemoteAddress | 0 | 0 | The IP address of the remote router for the network configured as an IP Numbered-Point-To-Point network. |
| 1.3.6.1.4.1.429.4.1.7.1.15 | usrCfgNetWanType | 0 | 0 | The Wan Type determines the type of the IP network created on top of the WAN (eg., Frame Relay). |
| 1.3.6.1.4.1.429.4.1.7.1.17 | usrCfgNetRpPiNormal | 0 | 0 | This flag determines whether the interface being defined is a generic one, or one which supports redundancy of RP and PI interfac… |
| 1.3.6.1.4.1.429.4.1.7.1.18 | usrCfgNetVlanTag | 0 | 0 | This determines the VLAN tag that needs to be added to all the packets going through this network. By default this value is 0. If… |