This switch will allow user filters to override the
interface filters. If set to 'off', user filters do not
override the interface filters. If set to 'on' user
filters can override the interface filters.
Parsed from file USR-CONFIG-MIB.mib.txt
Company: None
Module: USR-CONFIG-MIB
This switch will allow user filters to override the
interface filters. If set to 'off', user filters do not
override the interface filters. If set to 'on' user
filters can override the interface filters.
Parsed from file USR-CONFIG-MIB.mib
Module: USR-CONFIG-MIB
Vendor: UTStarcom Incorporated
Module: USR-CONFIG-MIB
[Automatically extracted from oidview.com]
usrCfgIfFilterAccess OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This switch will allow user filters to override the interface filters. If set to 'off', user filters do not override the interface filters. If set to 'on' user filters can override the interface filters." ::= {usrCfgIfEntry 8 }
usrCfgIfFilterAccess OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This switch will allow user filters to override the interface filters. If set to 'off', user filters do not override the interface filters. If set to 'on' user filters can override the interface filters." ::= {usrCfgIfEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.1.8.1.1 | usrCfgIfName | 0 | 0 | The name of this interface. The value of this object is the same as the ifName object of the standard Interface table (RFC-1573)… |
| 1.3.6.1.4.1.429.4.1.8.1.2 | usrCfgIfIndex | 0 | 0 | The interface index of this interface taken from the standard (RFC-1573) Interface MIB. |
| 1.3.6.1.4.1.429.4.1.8.1.3 | usrCfgIfAdminStatus | 0 | 0 | The permanently configured state of the interface. |
| 1.3.6.1.4.1.429.4.1.8.1.4 | usrCfgIfLinkUpDownTrapEnable | 0 | 0 | The permanently configured value, which indicates whether linkUp/linkDown traps should be generated for this interface. |
| 1.3.6.1.4.1.429.4.1.8.1.5 | usrCfgIfPromiscuousMode | 0 | 0 | This object has a value of DISABLED if this interface only accepts packets/frames that are addressed to this station. This objec… |
| 1.3.6.1.4.1.429.4.1.8.1.6 | usrCfgIfInFilter | 0 | 0 | The name of the input filter for a specific interface. |
| 1.3.6.1.4.1.429.4.1.8.1.7 | usrCfgIfOutFilter | 0 | 0 | The name of the output filter for a specific interface. |
| 1.3.6.1.4.1.429.4.1.8.1.9 | usrCfgIfSdlCmds | 0 | 0 | The Software Download Commands are as follows: normal: This mode is for normal operation. download: This command trigger the downlo… |
| 1.3.6.1.4.1.429.4.1.8.1.10 | usrCfgIfSdlCmdResults | 0 | 0 | The Software Download status are as follows: notSelected: The particular Device is not selected for software download. This mode i… |
| 1.3.6.1.4.1.429.4.1.8.1.11 | usrCfgIfSysIndex | 0 | 0 | The index of the Positron System Table that this interface belongs to. The value of this object will always be zero on non-Positr… |
| 1.3.6.1.4.1.429.4.1.8.1.12 | usrCfgIfManualSwitch | 0 | 0 | This switch controls the Interface status, when a SAVE ALL is issued and it was not disabled by the user. It should not be modifi… |
| 1.3.6.1.4.1.429.4.1.8.1.13 | usrCfgIfPolicy | 0 | 0 | The name of the policy for a specific interface. |
| 1.3.6.1.4.1.429.4.1.8.1.14 | usrCfgIfPolicyAccess | 0 | 0 | This switch will allow user policy to override the interface policy. If set to 'off', user policies do not override the interface… |
| 1.3.6.1.4.1.429.4.1.8.1.15 | usrCfgIfType | 0 | 0 | usrCfgIftype |
| 1.3.6.1.4.1.429.4.1.8.1.25 | usrCfgIfEthernetOperMode | 0 | 0 | This Variable allows one to change the ethernet device operating mode. Modes could be 10Half/10Full/100Half/100Full or Auto Nego… |