The current value of the MRU for the local PPP
Entity. This value is the MRU that the remote
entity is using when sending packets to the
local PPP entity.
Parsed from file USR-PPPML-MIB.mib.txt
Company: None
Module: USR-PPPML-MIB
The current value of the MRU for the local PPP
Entity. This value is the MRU that the remote
entity is using when sending packets to the
local PPP entity.
Parsed from file USR-PPPML-MIB.mib
Module: USR-PPPML-MIB
Vendor: UTStarcom Incorporated
Module: USR-PPPML-MIB
[Automatically extracted from oidview.com]
usrPPPSystemMRU OBJECT-TYPE SYNTAX Integer32(128..1518) MAX-ACCESS read-write STATUS current DESCRIPTION "The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity." DEFVAL { 1514 } ::= { usrPPPBase 22 }
usrPPPSystemMRU OBJECT-TYPE SYNTAX Integer32(128..1518) MAX-ACCESS read-write STATUS current DESCRIPTION "The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity." DEFVAL { 1514 } ::= { usrPPPBase 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.11.1.22.0 | usrPPPSystemMRU | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.11.1.1 | usrPPPBaseRxAuth | 1 | 1 | Indicates whether PPP requires dial-in users to authenticate strictly via PAP, CHAP, EAP-MD5, with any, none, encrypted only (CHA… |
| 1.3.6.1.4.1.429.4.11.1.2 | usrPPPBaseCfgFileName | 1 | 1 | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the PPP p… |
| 1.3.6.1.4.1.429.4.11.1.3 | usrPPPBaseCFMSaveStatus | 1 | 1 | Setting the value of this object to `save' causes the values of the PPP Base Group entries to be written out to the current PPP co… |
| 1.3.6.1.4.1.429.4.11.1.4 | usrPPPBaseTraceInterfaceIndex | 1 | 1 | Sets the interface index for which the PPP frames will be decoded and displayed according to PPP Trace facility loglevel. When th… |
| 1.3.6.1.4.1.429.4.11.1.5 | usrPPPBaseOffloading | 1 | 1 | Indicates whether PPP framing can be offloaded to the modem card, if modem card is capable of doing it. |
| 1.3.6.1.4.1.429.4.11.1.6 | usrPPPBaseCCPModemType | 1 | 1 | Indicates the types of call, for which CCP compression will be enabled in the Gateway card PPP module. Possible values are none(0… |
| 1.3.6.1.4.1.429.4.11.1.7 | usrPPPBaseNBNSPrimary | 1 | 1 | Global config for NBNS primary server address. In the absence of user specific NBNS address, this will be send in IPCP negotiation |
| 1.3.6.1.4.1.429.4.11.1.8 | usrPPPBaseNBNSSecondary | 1 | 1 | Global config for NBNS primary server address. In the absence of user specific NBNS address, this will be send in IPCP negotiation |
| 1.3.6.1.4.1.429.4.11.1.9 | usrPPPBaseSystemDNSUsage | 1 | 1 | In the absence of user configured DNS addresses, PPP will take DNS addresses from the system DNS table. Source of the DNS table c… |
| 1.3.6.1.4.1.429.4.11.1.10 | usrPPPBasePPPDNSPrimary | 1 | 1 | Global config for PPP DNS primary server address. In the absence of user specific DNS address, this will be send in IPCP negotiat… |
| 1.3.6.1.4.1.429.4.11.1.11 | usrPPPBasePPPDNSSecondary | 1 | 1 | Global config for PPP DNS secondary server address. In the absence of user specific DNS address, this will be send in IPCP negoti… |
| 1.3.6.1.4.1.429.4.11.1.12 | usrPPPBaseSessionStartMessage | 1 | 1 | This is the session start display message |
| 1.3.6.1.4.1.429.4.11.1.13 | usrPPPBaseAuthPreference | 1 | 1 | If PPP receive authentication is configured for ANY or, ENCRYPTED_ANY this setting can be used to set the first authentication at… |
| 1.3.6.1.4.1.429.4.11.1.14 | usrPPPBaseAcctForImatureDisc | 1 | 1 | Indicates whether to send Acct Records to premature disconnect. NOTE: obsolete, This MIB is not supported any more |
| 1.3.6.1.4.1.429.4.11.1.15 | usrPPPBaseProtFieldComp | 1 | 1 | Indicates whether PPP Protocol field compression is enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.16 | usrPPPBaseAddrFieldComp | 1 | 1 | Indicates whether PPP Address field compression is enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.17 | usrPPPBaseBacpBap | 1 | 1 | Indicates whether PPP Bacp and Bap enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.18 | usrPPPBaseBapPhone | 1 | 1 | The hunt_group phone number to be sent in BAP call-response |
| 1.3.6.1.4.1.429.4.11.1.19 | usrPPPBaseMPPP | 1 | 1 | Indicates whether PPP Mutlilink is Enabled/Disabled |
| 1.3.6.1.4.1.429.4.11.1.20 | usrPPPBaseReceiveACCM | 1 | 1 | Indicates whether PPP receive ACCM is Enabled/Disabled |
| 1.3.6.1.4.1.429.4.11.1.21 | usrPPPBaseNegCallback | 1 | 1 | Indicates whether PPP CBCP enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.23 | usrPPPBaseRADIUSChallengeInPAP | 1 | 1 | Special processing of RADIUS Challenge, if the authentication is PAP |
| 1.3.6.1.4.1.429.4.11.1.24 | usrPPPBasePapRetries | 1 | 1 | Indicates the retry limit for PAP protocol. Number of times PAP request shall be re-transmitted before timing out |
| 1.3.6.1.4.1.429.4.11.1.34 | usrPPPBaseRestartTimeout | 1 | 1 | The Restart timer is used to time transmissions of Configure-Request and Terminate-Request packets. Expiration of the Restart tim… |
| 1.3.6.1.4.1.429.4.11.1.35 | usrPPPBaseMaxConfigure | 1 | 1 | Max-Configure indicates the number of Configure-Request packets sent without receiving a valid Configure-Ack, Configure-Nak or Co… |
| 1.3.6.1.4.1.429.4.11.1.36 | usrPPPBaseDormLCPTerm | 1 | 1 | A toggle switch which determines whether to send out LCP TERM REQ when a call is dormant |
| 1.3.6.1.4.1.429.4.11.1.37 | usrPPPBaseLCPDelay | 1 | 1 | Indicates the amount of time the PDSN should wait before sending out an LCP Configure-Request |
| 1.3.6.1.4.1.429.4.11.1.40 | usrPPPBaseLCPTermOnDereg | 1 | 1 | Indicates whether the PDSN should transmit an LCP Term_Req on receipt of a deregistration req from the PCF |
| 1.3.6.1.4.1.429.4.11.1.43 | usrPPPBaseNoAuthSIP | 1 | 1 | Indicates whether the PDSN should allow Simple IP (SIP) calls that reject authentication during LCP. disabled means that the PDS… |