Value corresponds to the upstream constellation requested.
Parsed from file ADSL-MIB.mib.txt
Company: None
Module: ADSL-MIB
Value corresponds to the upstream constellation requested.
Parsed from file ADSL-MIB.mib
Module: ADSL-MIB
Vendor: UTStarcom Incorporated
Module: ADSL-MIB
[Automatically extracted from oidview.com]
usrAdslRmtReqUpConstStatus OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Value corresponds to the upstream constellation requested." ::= { usrAdsl 4 }
usrAdslRmtReqUpConstStatus OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Value corresponds to the upstream constellation requested." ::= { usrAdsl 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.26.4.0 | usrAdslRmtReqUpConstStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.26.1 | usrAdslXmitPower | 1 | 1 | Transmit power of ADSL transceiver represented in dB. |
| 1.3.6.1.4.1.429.4.26.2 | usrAdslRmtReqDwnConstStatus | 1 | 1 | Value corresponds to the downstream constellation requested. |
| 1.3.6.1.4.1.429.4.26.3 | usrAdslActualDwnConstStatus | 1 | 1 | Value corresponds to the actual downstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.26.5 | usrAdslActualUpConstStatus | 1 | 1 | Value corresponds to the actual upstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.26.6 | usrAdslFwRel | 1 | 1 | Firmware release number of the GTI supplied transceiver software module. |
| 1.3.6.1.4.1.429.4.26.7 | usrAdslStartletVerson | 1 | 1 | Value is a number that corresponds to the version number of the STARLET VLSI in the transceiver. |
| 1.3.6.1.4.1.429.4.26.8 | usrAdslMeanSqError | 1 | 1 | Received signal to noise ratio. |
| 1.3.6.1.4.1.429.4.26.9 | usrAdslEqualization | 1 | 1 | TBD |
| 1.3.6.1.4.1.429.4.26.10 | usrAdslReceiverGain | 1 | 1 | Total receiver gain measured in dB. |
| 1.3.6.1.4.1.429.4.26.11 | usrAdslBytesErrCorrected | 1 | 1 | Number of bytes corrected by Reed-Solomon error correction algorithm in the STARLET. |
| 1.3.6.1.4.1.429.4.26.12 | usrAdslBytesNotErrCorrected | 1 | 1 | Number of bytes not corrected by Reed-Solomon error correction algorithm in the STARLET. |
| 1.3.6.1.4.1.429.4.26.13 | usrAdslOverflowCounter | 1 | 1 | Running counter for when usrAdslBytesErrorCorrected or usrAdslBytesNotErrorCorrected overflows |
| 1.3.6.1.4.1.429.4.26.14 | usrAdslOpState | 1 | 1 | Defines the high level operating state of the transceiver. Used by the customer to determine whether the transceiver is in idle m… |
| 1.3.6.1.4.1.429.4.26.15 | usrAdslStartupProgress | 1 | 1 | Defines the current detailed startup state of the transceiver. The LSB determines the major mode corresponding to startup in var… |
| 1.3.6.1.4.1.429.4.26.16 | usrAdslLastFailedStatus | 1 | 1 | Defines the last detailed state reached in usrAdslStartupProgress before startup failed. |
| 1.3.6.1.4.1.429.4.26.17 | usrAdslActualBaudDataRateDwn | 1 | 1 | Actual downstream rate of kilobytes per second. |
| 1.3.6.1.4.1.429.4.26.18 | usrAdslActualBaudDataRateDwnMar | 1 | 1 | TBD |
| 1.3.6.1.4.1.429.4.26.19 | usrAdslActualBaudDataRateUp | 1 | 1 | Actual upstream rate of kilobytes per second. |
| 1.3.6.1.4.1.429.4.26.20 | usrAdslActualBaudDataRateUpMarg | 1 | 1 | TBD |
| 1.3.6.1.4.1.429.4.26.21 | usrAdslCFMStatusFlag | 1 | 1 | This variable controls saving and loading of configuration information for the D56k WAN Driver. The value can be set to either sa… |
| 1.3.6.1.4.1.429.4.26.22 | usrAdslCfgFileName | 1 | 1 | The name of a ConfigFile to read/write the D56k parameters. If the value of this object is an empty string, then the D56k Driver … |
| 1.3.6.1.4.1.429.4.26.23 | usrAdslResetStatus | 1 | 1 | The Reset Status of the ADSL Starlet chipset |