Running counter for when usrAdslBytesErrorCorrected or
usrAdslBytesNotErrorCorrected overflows. This Number is reset
to zero each time the Transceiver transitions from Idle Mode to Data Mode.
Parsed from file ADSLF-MIB.mib.txt
Company: None
Module: ADSLF-MIB
Running counter for when usrAdslBytesErrorCorrected or
usrAdslBytesNotErrorCorrected overflows. This Number is reset
to zero each time the Transceiver transitions from Idle Mode to Data Mode.
Parsed from file ADSLF-MIB.mib
Module: ADSLF-MIB
Vendor: UTStarcom Incorporated
Module: ADSLF-MIB
[Automatically extracted from oidview.com]
usrAdslOverFlowCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running counter for when usrAdslBytesErrorCorrected or usrAdslBytesNotErrorCorrected overflows. This Number is reset to zero each time the Transceiver transitions from Idle Mode to Data Mode." ::= { usrAdslf 73 }
usrAdslOverFlowCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running counter for when usrAdslBytesErrorCorrected or usrAdslBytesNotErrorCorrected overflows. This Number is reset to zero each time the Transceiver transitions from Idle Mode to Data Mode." ::= { usrAdslf 73 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.32.73.0 | usrAdslOverFlowCounter | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.32.1 | adslLineCoding | 1 | 1 | Specifies the ADSL coding type used on this line. Other types may be added in the future with higher values ala ifIANAtype. This … |
| 1.3.6.1.4.1.429.4.32.2 | adslLineType | 1 | 1 | this describes which other tables go with this ifEntry. use EITHER three separate ifEntries (and adslLinEntries): (1) and tables … |
| 1.3.6.1.4.1.429.4.32.3 | adslLineSpecific | 1 | 1 | OID instance in vendor-specific MIB. The Instance may be used to determine shelf/slot/port of the ATU-C interface in a DSLAM (am… |
| 1.3.6.1.4.1.429.4.32.4 | adslLineStatus | 1 | 1 | Status indicates mandatory state of the line. This is a bit-map of possible conditions. These are from the perspective of the ATU… |
| 1.3.6.1.4.1.429.4.32.5 | adslAturInvSerialNumber | 1 | 1 | Vendor specific Serial number of the ATU-C modem |
| 1.3.6.1.4.1.429.4.32.6 | adslAturInvVendorID | 1 | 1 | The vendor ID assigned by T1E1.4 according to its Appendix D. |
| 1.3.6.1.4.1.429.4.32.7 | adslAturCurrOutputPower | 1 | 1 | Current output power |
| 1.3.6.1.4.1.429.4.32.8 | adslAturCurrTransmitRate | 1 | 1 | Current transmit rate in kbps, limited to multiples of 32kbps |
| 1.3.6.1.4.1.429.4.32.9 | adslAturCurrCodeWordLength | 1 | 1 | Current Code Word Length, calculated from Transmit rate and noise margin |
| 1.3.6.1.4.1.429.4.32.10 | adslAturCurrSnrMgn | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.11 | adslAturCurrAtn | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.12 | adslAturCurrReceiveGain | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.13 | adslAturPerfValidIntervals | 1 | 1 | number of valid intervals in the adslAturPerfDataTable |
| 1.3.6.1.4.1.429.4.32.14 | adslAturPerfLof | 1 | 1 | count of the number of Loss of Framing events since system reset. |
| 1.3.6.1.4.1.429.4.32.15 | adslAturPerfLos | 1 | 1 | count of the number of Loss of Signal events since system reset. |
| 1.3.6.1.4.1.429.4.32.16 | adslAturPerfLpr | 1 | 1 | count of the number of Loss of Power events since system reset. |
| 1.3.6.1.4.1.429.4.32.17 | adslAturPerfCV | 1 | 1 | count of the number of Loss of Coding Violation events since system reset. |
| 1.3.6.1.4.1.429.4.32.18 | adslAturPerfES | 1 | 1 | count of the number of Errored Seconds since system reset. |
| 1.3.6.1.4.1.429.4.32.19 | adslAturPerfCurr1DayElapSecs | 1 | 1 | The total time interval over which all Curr1Day interval counters are measured. If 0, this interval is invalid. |
| 1.3.6.1.4.1.429.4.32.20 | adslAturPerfCurr1DayMoniSecs | 1 | 1 | The total number of valid seconds in the Curr1Day interval counters. This may be less than adslAturPerfCurr1DayElapSecs only whe… |
| 1.3.6.1.4.1.429.4.32.21 | adslAturPerfPrev1DayElapSecs | 1 | 1 | The total time interval over which all Prev1Day interval counters are measured. If 0, this interval is invalid. |
| 1.3.6.1.4.1.429.4.32.22 | adslAturPerfPrev1DayMoniSecs | 1 | 1 | The total number of valid seconds in the Prev1Day interval counters. This may be less than adslAturPerfPrev1DayElapSecs only whe… |
| 1.3.6.1.4.1.429.4.32.23 | adslAturPerfCurr1DayLofs | 1 | 1 | Count of the number of seconds when there was Loss of Framing during the mandatory day, as measured by adslAturPerfCurr1DayElapS… |
| 1.3.6.1.4.1.429.4.32.24 | adslAturPerfPrev1DayLofs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.25 | adslAturPerfCurr1DayLoss | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.26 | adslAturPerfPrev1DayLoss | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.27 | adslAturPerfCurr1DayLprs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.28 | adslAturPerfPrev1DayLprs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.29 | adslAturPerfCurr1DayCVs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.30 | adslAturPerfPrev1DayCVs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.31 | adslAturPerfCurr1DayES | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.32 | adslAturPerfPrev1DayES | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.33 | adslAturPerfCurr15minLofs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.34 | adslAturPerfPrev15minLofs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.35 | adslAturPerfCurr15minLoss | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.36 | adslAturPerfPrev15minLoss | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.37 | adslAturPerfCurr15minLprs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.38 | adslAturPerfPrev15minLprs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.39 | adslAturPerfCurr15minES | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.40 | adslAturPerfPrev15minES | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.41 | adslAturThresh15MinLofs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.42 | adslAturThresh15MinLoss | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.43 | adslAturThresh15MinLprs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.44 | adslAturThresh15MinCVs | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.45 | adslAturThresh15MinES | 1 | 1 | to be supplied. |
| 1.3.6.1.4.1.429.4.32.46 | adslAturInitFailureTrapEnable | 1 | 1 | values as above |
| 1.3.6.1.4.1.429.4.32.47 | adslAturChanCurrTxRate | 1 | 1 | derived from adslAturConfMinTxRate + as long as it is < adslAturChanConfMaxTxRate |
| 1.3.6.1.4.1.429.4.32.48 | adslAturChanPrevTxRate | 1 | 1 | The rate that was set at the previous adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sen… |
| 1.3.6.1.4.1.429.4.32.49 | adslAturChanReceivedBlocks | 1 | 1 | count of all encoded blocks received on this channel. |
| 1.3.6.1.4.1.429.4.32.50 | adslAturChanTransmittedBlocks | 1 | 1 | count of all encoded blocks transmitted on this channel. |
| 1.3.6.1.4.1.429.4.32.51 | adslAturChanCorrectedBlocks | 1 | 1 | count of all blocks received with errors that were corrected. These blocks are passed on as good data. |
| 1.3.6.1.4.1.429.4.32.52 | adslAturChanUncorrectableBlocks | 1 | 1 | count of all blocks received with uncorrectable errors. These blocks are dropped from the received data stream. |
| 1.3.6.1.4.1.429.4.32.53 | usrAdslCFMStatusFlag | 1 | 1 | This variable controls saving and loading of configuration information for the ADSL WAN Driver. The value can be set to either sa… |
| 1.3.6.1.4.1.429.4.32.54 | usrAdslCfgFileName | 1 | 1 | The name of a ConfigFile to read/write the ADSL parameters. If the value of this object is an empty string, then the ADSL Driver … |
| 1.3.6.1.4.1.429.4.32.55 | usrAdslResetStatus | 1 | 1 | The Reset Status of the ADSL Starlet chipset |
| 1.3.6.1.4.1.429.4.32.56 | usrAdslActualBaudDataRateDwn | 1 | 1 | Actual Downstream Baud Rate |
| 1.3.6.1.4.1.429.4.32.57 | usrAdslFwRel | 1 | 1 | Firmware release number of the GTI supplied transceiver software module. |
| 1.3.6.1.4.1.429.4.32.58 | usrAdslAdiVerson | 1 | 1 | Value is a number that corresponds to the version number of the ADI chipset. |
| 1.3.6.1.4.1.429.4.32.59 | usrAdslLocalReqDwnConstStatus | 1 | 1 | Value corresponds to the local downstream constellation requested. |
| 1.3.6.1.4.1.429.4.32.60 | usrAdslActualUpConstStatus | 1 | 1 | Value corresponds to the actual upstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.32.62 | usrAdslRemoteReqUpConstStatus | 1 | 1 | Value corresponds to the remote requested downstream constellation requested. |
| 1.3.6.1.4.1.429.4.32.63 | usrAdslStartletVerson | 1 | 1 | Value is a number that corresponds to the version number of the STARLET VLSI in the transceiver. |
| 1.3.6.1.4.1.429.4.32.64 | usrAdslActualDwnConstStatus | 1 | 1 | Value corresponds to the actual downstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.32.65 | usrAdslLocalReqUpConstStatus | 1 | 1 | Value corresponds to the local upstream constellation requested. |
| 1.3.6.1.4.1.429.4.32.66 | usrAdslRemoteReqDwnConstStatus | 1 | 1 | Value corresponds to the remote downstream constellation requested. |
| 1.3.6.1.4.1.429.4.32.67 | usrAdslLocalReqBaudDataRateDwn | 1 | 1 | Local Downstream Baud Rate requested by the User. |
| 1.3.6.1.4.1.429.4.32.68 | usrAdslFixBitStatus | 1 | 1 | Fixed Bit Rate feature status. |
| 1.3.6.1.4.1.429.4.32.69 | usrAdslLocalReqXmitPower | 1 | 1 | Transmit power requested at the local ADSL transceiver represented i n dB. |
| 1.3.6.1.4.1.429.4.32.70 | usrAdslRemoteProtocolType | 1 | 1 | Protocol type in use by the remote RTU. |
| 1.3.6.1.4.1.429.4.32.71 | usrAdslMeanSqError | 1 | 1 | Received signal to noise ratio. |
| 1.3.6.1.4.1.429.4.32.72 | usrAdslLocalActualXmitPower | 1 | 1 | Transmit power of the local ADSL transceiver represented in dB. |
| 1.3.6.1.4.1.429.4.32.74 | usrAdslLastFailedStatus | 1 | 1 | Defines the last detailed state reached in usrAdslStartupProgress before startup failed. |
| 1.3.6.1.4.1.429.4.32.75 | usrAdslBytesNotErrCorrected | 1 | 1 | Number of bytes not corrected by Reed-Solomon error correction algorithm in the STARLET.This Number is reset to zero each time th… |
| 1.3.6.1.4.1.429.4.32.76 | usrAdslOpState | 1 | 1 | Defines the high level operating state of the transceiver. Used by the customer to determine whether the transceiver is in idle m… |
| 1.3.6.1.4.1.429.4.32.77 | usrAdslBytesErrCorrected | 1 | 1 | Number of bytes corrected by Reed-Solomon error correction algorithm in the STARLET.This Number is reset to zero each time the Tr… |
| 1.3.6.1.4.1.429.4.32.78 | usrAdslLocalProtocolType | 1 | 1 | Protocol type in use by the local RTU. |
| 1.3.6.1.4.1.429.4.32.79 | usrAdslLastFailedErrorValue | 1 | 1 | Defines the last detailed value reached in usrAdslStartupProgress before startup failed. |
| 1.3.6.1.4.1.429.4.32.81 | usrAdslLocalReceiverGain | 1 | 1 | Total local receiver gain measured in dB. |
| 1.3.6.1.4.1.429.4.32.82 | usrAdslSwitchType | 1 | 1 | usrAdslSwitchtype |
| 1.3.6.1.4.1.429.4.32.90 | usrAdslRemoteReqBaudDataRateDwn | 1 | 1 | Remote Downstream Baud Rate requested by the User. |