Allow splitting of equal cost routes. IPX maintains multiple routes to
the same destination network. When this field is enabled IPX will split
traffic over the multiple routes. This is also know as load balancing.
Not currently supported by the code.
Parsed from file IpxHost-MIB.mib.txt
Company: None
Module: IpxHost-MIB
Allow splitting of equal cost routes. IPX maintains multiple routes to
the same destination network. When this field is enabled IPX will split
traffic over the multiple routes. This is also know as load balancing.
Not currently supported by the code.
Parsed from file IpxHost-MIB.mib
Module: IpxHost-MIB
Vendor: UTStarcom Incorporated
Module: IpxHost-MIB
[Automatically extracted from oidview.com]
usrIpxSplitEqualCostRoutes OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow splitting of equal cost routes. IPX maintains multiple routes to the same destination network. When this field is enabled IPX will split traffic over the multiple routes. This is also know as load balancing. Not currently supported by the code." ::= { usrIpx 2 }
usrIpxSplitEqualCostRoutes OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allow splitting of equal cost routes. IPX maintains multiple routes to the same destination network. When this field is enabled IPX will split traffic over the multiple routes. This is also know as load balancing. Not currently supported by the code." ::= { usrIpx 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.429.4.4.2.0 | usrIpxSplitEqualCostRoutes | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.429.4.4.1 | usrIpxVersionNumber | 1 | 1 | The version number for the IPX module. |
1.3.6.1.4.1.429.4.4.3 | usrIpxProtocolPriority | 1 | 1 | The IPX priority relative to other protocols. Not currently supported by the code. |
1.3.6.1.4.1.429.4.4.4 | usrIpxMaxRegisteredPaths | 1 | 1 | The maximum number of routes to be maintained in the box. Not currently supported by the code. |
1.3.6.1.4.1.429.4.4.5 | usrIpxDefaultGateway | 1 | 1 | The Default Gateway. The first leading bytes are IPX network number and the trailing 6 bytes of this string should contain ether… |
1.3.6.1.4.1.429.4.4.6 | usrIpxRipTracingState | 1 | 1 | The state of RIP Packet Tracing. When this is enabled each packet that the IPX RIP software receives is printed to the console. T… |
1.3.6.1.4.1.429.4.4.7 | usrIpxSapTracingState | 1 | 1 | The state of SAP Packet Tracing. When this is enabled each packet that the IPX SAP software receives is printed to the console. T… |
1.3.6.1.4.1.429.4.4.8 | usrIpxStaticRouteTable | 1 | 9 | None |
1.3.6.1.4.1.429.4.4.9 | usrIpxStaticServTable | 1 | 12 | The Static Services table contains information about all services reached via statically configured routes. |
1.3.6.1.4.1.429.4.4.10 | usrIpxPortalTable | 1 | 32 | None |
1.3.6.1.4.1.429.4.4.11 | usrIpxDynamicNetworkRangeStart | 1 | 1 | This is the first number in a range of network numbers IPX uses to dynamically assign to dial-in users. The end of the range is … |
1.3.6.1.4.1.429.4.4.12 | usrIpxMaxDynamicNetworkNumbers | 1 | 1 | Maximum number of network addresses available to allocate to dial-in users. |
1.3.6.1.4.1.429.4.4.13 | usrIpxSaveConfigFlag | 1 | 1 | Setting the value of this object to `save' causes the values of the IPX configuration to be written out to the current IPX config… |
1.3.6.1.4.1.429.4.4.14 | usrIpxConfigFileName | 1 | 1 | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the IPX p… |
1.3.6.1.4.1.429.4.4.15 | usrIpxState | 1 | 1 | Ipx state. |
1.3.6.1.4.1.429.4.4.16 | usrIpxEnable | 1 | 1 | To enable or disable IPX. When Disable is set the RIP process will send out shutdown messages on all its ports in order to infor… |
1.3.6.1.4.1.429.4.4.17 | usrIpxServTable | 1 | 9 | The Services table contains information about all services reached via statically entered saps or learned saps. |
1.3.6.1.4.1.429.4.4.18 | usrIpxDelServiceAll | 1 | 1 | This object is used to clear the whole SAP table. Current support is only for clearing all non-static SAP entries. |
1.3.6.1.4.1.429.4.4.19 | usrIpxDestTable | 1 | 10 | The Destination table contains information about all known destinations. |
1.3.6.1.4.1.429.4.4.20 | usrIpxDelRouteAll | 1 | 1 | This object is used to clear the whole routing table |
1.3.6.1.4.1.429.4.4.21 | usrPPPIpxAddress | 1 | 1 | The IPX ADDRESS assigned to all PPP user's if they are configured as such. |