This object is used in case of subscirber busy.
Parsed from file HDR2-MIB.mib.txt
Company: None
Module: HDR2-MIB
This object is used in case of subscirber busy.
Parsed from file HDR2-MIB.mib
Module: HDR2-MIB
Vendor: UTStarcom Incorporated
Module: HDR2-MIB
[Automatically extracted from oidview.com]
hdr2CfgSubBusy OBJECT-TYPE SYNTAX INTEGER{ b2(1), b3(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used in case of subscirber busy. " DEFVAL { b3 } ::= { hdr2CfgEntry 13 }
hdr2CfgSubBusy OBJECT-TYPE SYNTAX INTEGER{ b2(1), b3(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used in case of subscirber busy. " DEFVAL { b3 } ::= { hdr2CfgEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.48.1.1.1.1 | hdr2CfgIndex | 0 | 0 | The index which uniquely identifies the Hiper E1/R2 CARD to which this entry is applicable. |
| 1.3.6.1.4.1.429.4.48.1.1.1.2 | hdr2CfgRegSigType | 0 | 0 | This object Defines the type of Register Signaling used for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.3 | hdr2CfgAnumIden | 0 | 0 | This parameter enables or disables the collection of calling party ( A party or ANI) phone numbers when used with R2MFC signaling… |
| 1.3.6.1.4.1.429.4.48.1.1.1.4 | hdr2CfgForcedRel | 0 | 0 | In E1/ R2 ,Forced Release Line signal will be sent only in case of this parameter is enabled. This signal is optional. |
| 1.3.6.1.4.1.429.4.48.1.1.1.5 | hdr2CfgLastBDigTout | 0 | 0 | This parameter decides, after how many milliseconds of silence during the B digit reception, the B party number is assumed as com… |
| 1.3.6.1.4.1.429.4.48.1.1.1.6 | hdr2CfgAddrComplete | 0 | 0 | On reception of this signal it is assumed that the required number of B party digits are received. It can hold the values ranging… |
| 1.3.6.1.4.1.429.4.48.1.1.1.7 | hdr2CfgEndBparty | 0 | 0 | This indicates whether I15 is will be received as an indication for End of B party number or not. If enabled, at the end of B pa… |
| 1.3.6.1.4.1.429.4.48.1.1.1.8 | hdr2CfgAlawMulaw | 0 | 0 | This object is configuration to apply A Law(E1) or MuLaw(T1) Companding. |
| 1.3.6.1.4.1.429.4.48.1.1.1.9 | hdr2CfgLineSigType | 0 | 0 | This object defines the type of Line Signaling for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.10 | hdr2CfgProjID | 0 | 0 | Depending on this parameter, country dependent or project dependent parameters are updated. Each and every parameter has a set of… |
| 1.3.6.1.4.1.429.4.48.1.1.1.11 | hdr2CfgSeizeAck | 0 | 0 | It defines whether seize acknowledge signal is used or not for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.12 | hdr2CfgAnumBnum | 0 | 0 | During Bit oriented Register Signaling , after number of B party ( called party or DNIS) digits have been received, the A party (… |
| 1.3.6.1.4.1.429.4.48.1.1.1.14 | hdr2CfgSndCallingPtyCatgy | 0 | 0 | This register Signal requests the calling ( A PARTY's ) category. |
| 1.3.6.1.4.1.429.4.48.1.1.1.15 | hdr2CfgLineDirection | 0 | 0 | This object sets the direction of the channels on the span line. |
| 1.3.6.1.4.1.429.4.48.1.1.1.16 | hdr2CfgPersistentOverride | 0 | 0 | This object allows the recieved line signal persistence (debounce time). |
| 1.3.6.1.4.1.429.4.48.1.1.1.17 | hdr2CfgWrongNumber | 0 | 0 | This object is the backward register signal used to indicate that an invalid number has been dialed. |
| 1.3.6.1.4.1.429.4.48.1.1.1.18 | hdr2CfgIncomingCpc | 0 | 0 | This object determines the default calling party category to be assumed when none is supplied for an incoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.19 | hdr2CfgRegSigStatus | 0 | 0 | This object determines whether or not register signalling is used for incoming and outgoing calls for R2. |
| 1.3.6.1.4.1.429.4.48.1.1.1.20 | hdr2CfgUnusedAbcd | 0 | 0 | This object determines the bit pattern transmitted for whichever of the ABCD bits are not used for the selected line signalling s… |
| 1.3.6.1.4.1.429.4.48.1.1.1.21 | hdr2CfgBlkToBlk | 0 | 0 | This object determines whether or not a blocking signals received in the idle state is automatically responded to with a transmit… |
| 1.3.6.1.4.1.429.4.48.1.1.1.22 | hdr2CfgDelayLos | 0 | 0 | This object determines the required duration of the LOS state before active calls are dropped and the signalling is reinitialised… |
| 1.3.6.1.4.1.429.4.48.1.1.1.23 | hdr2CfgInGlare | 0 | 0 | This object determines whether the incoming call is accepted and the outgoing call is dropped in a glare condition, or both calls… |
| 1.3.6.1.4.1.429.4.48.1.1.1.24 | hdr2CfgClrCall | 0 | 0 | This object determines whether an active call is cleared when an unexpected line signal is received, or the line signal is ignore… |
| 1.3.6.1.4.1.429.4.48.1.1.1.25 | hdr2CfgANumQry | 0 | 0 | This object determines whether or not an extra MFC cycle is used before to the A-number to indicate whether an A-number is availa… |
| 1.3.6.1.4.1.429.4.48.1.1.1.26 | hdr2CfgANumNAv | 0 | 0 | THis object interpret I-12 as A-number not available. |
| 1.3.6.1.4.1.429.4.48.1.1.1.27 | hdr2CfgANumReq | 0 | 0 | this object backward register signal used to request transmission of the next A-number digit Frequently this is the same as the s… |
| 1.3.6.1.4.1.429.4.48.1.1.1.28 | hdr2CfgClrFwd | 0 | 0 | This object repeatd size/clear-forward sequence is sent to startup to try to provoke a response from attached equipment. |
| 1.3.6.1.4.1.429.4.48.1.1.1.29 | hdr2CfgRelGuard | 0 | 0 | This object is duration for which Release Guard signal is sent. |
| 1.3.6.1.4.1.429.4.48.1.1.1.30 | hdr2CfgPIClrBck | 0 | 0 | This object determines whether or not a repeated release/Seize-ack sequence is sent while attempting to clear anincoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.31 | hdr2CfgDelayAns | 0 | 0 | this object determines the delay between the end of addressing and transmission of the answer signal. |
| 1.3.6.1.4.1.429.4.48.1.1.1.32 | hdr2CfgBNumLen | 0 | 0 | this object determines the number of B-number digits to accept beore sending the 'address complete'signal, provided the 'end of B… |
| 1.3.6.1.4.1.429.4.48.1.1.1.33 | hdr2CfgActBTout | 0 | 0 | this object determines action to be taken on last B-digit timeout. |
| 1.3.6.1.4.1.429.4.48.1.1.1.34 | hdr2CfgInSubFree | 0 | 0 | this object backward register signal used to indicate acceptance of an incoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.35 | hdr2CfgBNumNFnd | 0 | 0 | this object determines the action on B-Number not found in teh DNIS handling table. |
| 1.3.6.1.4.1.429.4.48.1.1.1.36 | hdr2CfgSndBNumN | 0 | 0 | this object backward signal requesting retransmission of curent B-number digit for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.37 | hdr2CfgSndBNumN1 | 0 | 0 | this object backward signal requesting transmission of B-number digit N-1 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.38 | hdr2CfgSndBNumN2 | 0 | 0 | this object backward signal requesting transimission of B-number digit N-2 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.39 | hdr2CfgSndBNumN3 | 0 | 0 | this object backward signal requesting transimission of B-number digit N-3 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.40 | hdr2CfgSndFBNum | 0 | 0 | this object determines whether or not the I-15 'end of B-number' signal is used for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.41 | hdr2CfgDumANum | 0 | 0 | this object default A-number for outgoing calls in case none is supplied during call initiation. |
| 1.3.6.1.4.1.429.4.48.1.1.1.42 | hdr2CfgEndANum | 0 | 0 | This object forward register signal used to indicate that no more a_number digits are avaible.default=iii-15. |
| 1.3.6.1.4.1.429.4.48.1.1.1.43 | hdr2CfgOutCatAnalog | 0 | 0 | This object forward signals used to indicate the call category for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.44 | hdr2CfgOutCatDigital | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.48.1.1.1.45 | hdr2CfgOutCatTest | 0 | 0 | None |
| 1.3.6.1.4.1.429.4.48.1.1.1.46 | hdr2CfgOutCatMaintenance | 0 | 0 | None |