The description of one of the AppleTalk configuration port.
Parsed from file usr_at_forw.mib.txt
Company: a3com
Module: USR-AT-FORW-MIB
Vendor: 3Com
Module: USR-AT-FORW-MIB (usr_at_forw.mib)
Type: ENTRY
Access: not-accessible
Syntax: AtcfgFwdPortEntry
Automatically extracted from www.mibdepot.com
atcfgFwdPortEntry OBJECT-TYPE SYNTAX AtcfgFwdPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of one of the AppleTalk configuration port." INDEX { atcfgFwdPortIndex } ::= { atcfgFwdPortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.6.1.1.1 | atcfgFwdPortIndex | 0 | 0 | The identifier of the port in the configuration file, this is the same as the network name stored by the configuration process. |
| 1.3.6.1.4.1.429.4.6.1.1.2 | atcfgFwdPortName | 0 | 0 | A name for this port. Maps to the Port Descriptor for the atportTable. |
| 1.3.6.1.4.1.429.4.6.1.1.3 | atcfgFwdNetworkRange | 0 | 0 | The startup network range for this port. |
| 1.3.6.1.4.1.429.4.6.1.1.5 | atcfgFwdSeedRouter | 0 | 0 | Set this value to seed if this is a seed router on this port. |
| 1.3.6.1.4.1.429.4.6.1.1.6 | atcfgFwdSendChecksums | 0 | 0 | Set this value to send to send checksums on this port. |
| 1.3.6.1.4.1.429.4.6.1.1.7 | atcfgFwdDefaultPort | 0 | 0 | Set this value to default if this port can be the default port. |
| 1.3.6.1.4.1.429.4.6.1.1.8 | atcfgFwdGleaning | 0 | 0 | Set this value to glean to glean to the AARP cache. |
| 1.3.6.1.4.1.429.4.6.1.1.9 | atcfgFwdDefaultZone | 0 | 0 | The default zone name for this port. Only valid if this node is a seed router on this port. |
| 1.3.6.1.4.1.429.4.6.1.1.10 | atcfgFwdCurrentZone | 0 | 0 | The desired zone name for this router on this port. May be left blank. |
| 1.3.6.1.4.1.429.4.6.1.1.11 | atcfgFwdZoneList | 0 | 0 | The list of zones configured for this port. Not used if this is not a seed router. Mandatory if this is a seed router. |
| 1.3.6.1.4.1.429.4.6.1.1.12 | atcfgFwdPortSave | 0 | 0 | Set this value to 'save' to save this port configuration. |
| 1.3.6.1.4.1.429.4.6.1.1.13 | atcfgFwdNodeSet | 0 | 0 | The node number requested for this port by the administrator. If set to 0.0, then select any node number. |
| 1.3.6.1.4.1.429.4.6.1.1.14 | atcfgFwdNodeLock | 0 | 0 | If this is TRUE, the router will come up on the set node or it won't come up at all. |