Reference record for OID 1.3.6.1.4.1.43.10.2.2.2

parent

1.3.6.1.4.1.43.10.2.2 (setupIp)

node code

2

node name

setIpIfRouter

dot oid

1.3.6.1.4.1.43.10.2.2.2

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) generic(10) setup(2) setupIp(2) setIpIfRouter(2)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) generic(10) setup(2) setupIp(2) setIpIfRouter(2)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) generic(10) setup(2) setupIp(2) setIpIfRouter(2)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) generic(10) setup(2) setupIp(2) setIpIfRouter(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) generic(10) setup(2) setupIp(2) setIpIfRouter(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) generic(10) setup(2) setupIp(2) setIpIfRouter(2)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/a3Com/generic/setup/setupIp/setIpIfRouter

/iso/identified-organization/dod/internet/private/enterprises/a3Com/generic/setup/setupIp/setIpIfRouter

/iso/org/dod/internet/private/enterprise/a3Com/generic/setup/setupIp/setIpIfRouter

/iso/org/dod/internet/private/enterprises/a3Com/generic/setup/setupIp/setIpIfRouter

/iso/iso-identified-organization/dod/internet/private/enterprise/a3Com/generic/setup/setupIp/setIpIfRouter

/iso/iso-identified-organization/dod/internet/private/enterprises/a3Com/generic/setup/setupIp/setIpIfRouter

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/43/10/2/2/2

Description by mibdepot

This is the IP address of the default router to be used for
sending IP datagrams to remote destinations which have no
suitable entry in the routing table. This corresponds to an
entry in the MIB-II ipRouteTable with an ipRouteDest field of
'0.0.0.0' (the default router) which is set up from this value
after a system restart.

Changes to this value do not affect the IP routing table until
after the next system restart. (To change the default router
without a restart, the IP routing table should be changed
directly, with an equivalent change to setIpIfRouter only if
the change is required to be made permanently.)

Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB

Description by circitor

This is the IP address of the default router to be used for
sending IP datagrams to remote destinations which have no
suitable entry in the routing table. This corresponds to an
entry in the MIB-II ipRouteTable with an ipRouteDest field of
'0.0.0.0' (the default router) which is set up from this value
after a system restart.

Changes to this value do not affect the IP routing table until
after the next system restart. (To change the default router
without a restart, the IP routing table should be changed
directly, with an equivalent change to setIpIfRouter only if
the change is required to be made permanently.)

Parsed from file LBHUB-MSH-MIB.mib
Module: LBHUB-MSH-MIB

Information by oid_info

Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

Information by mibdepot

setIpIfRouter	OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"This is the IP address of the default router to be used for
		sending IP datagrams to remote destinations which have no
		suitable entry in the routing table.  This corresponds to an
		entry in the MIB-II ipRouteTable with an ipRouteDest field of
		'0.0.0.0' (the default router) which is set up from this value
		after a system restart.
		
		Changes to this value do not affect the IP routing table until
		after the next system restart.  (To change the default router
		without a restart, the IP routing table should be changed
		directly, with an equivalent change to setIpIfRouter only if
		the change is required to be made permanently.)"
	::= { setupIp 2 }

Information by circitor

setIpIfRouter	OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"This is the IP address of the default router to be used for
		sending IP datagrams to remote destinations which have no
		suitable entry in the routing table.  This corresponds to an
		entry in the MIB-II ipRouteTable with an ipRouteDest field of
		'0.0.0.0' (the default router) which is set up from this value
		after a system restart.
		
		Changes to this value do not affect the IP routing table until
		after the next system restart.  (To change the default router
		without a restart, the IP routing table should be changed
		directly, with an equivalent change to setIpIfRouter only if
		the change is required to be made permanently.)"
	::= { setupIp 2 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.43)

Jeremy Siegel

Children (1)

Brothers (2)