Automatically extracted from a file named S3M_AGENT
igmpSnoop OBJECT IDENTIFIER ::= { igmpMIB 1 }
igmpSnoop OBJECT IDENTIFIER ::= { igmpMib 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.37.1.1 | igmpSnoopEnabled | 1 | 1 | Enables/disables IGMP Snooping on this device. It is set stack-wide. The defaule value is True. The range is True(1) or False(2). |
| 1.3.6.1.4.1.43.10.37.1.2 | igmpSnoopRobustness | 1 | 1 | igmpSnoopRobustness OBJECT-TYPE SYNTAX INTEGER -- (1..7) ACCESS read-write STATUS mandatory DESCRIPTION "This variable allows t… |
| 1.3.6.1.4.1.43.10.37.1.3 | igmpSnoopLeaveEnabled | 1 | 1 | Enables/disables the processing of IGMP v2 leave messages stack-wide. The default value is True(1). The range is True(1) or Fals… |
| 1.3.6.1.4.1.43.10.37.1.4 | igmpSnoopQueryTimeout | 1 | 1 | The frequency at which IGMP general query packets are transmitted on this VLAN by the querying switch in seconds. So this is the … |
| 1.3.6.1.4.1.43.10.37.1.5 | igmpSnoopQueryMaxResponseTime | 1 | 1 | The maximum query response time in seconds advertised in IGMP v2 queries on this VLAN if the switch is the querier. Smaller valu… |
| 1.3.6.1.4.1.43.10.37.1.6 | igmpSnoopLastMemberQueryTimeout | 1 | 1 | A timeout interval in seconds. Maximum response time inserted into the IGMP group specific queries sent in response to an IGMP Le… |
| 1.3.6.1.4.1.43.10.37.1.7 | igmpSnoopLastMemberQueryCount | 1 | 1 | The number of group specific queries sent before the querying switch decides that there are no more hosts listening to a particu… |
| 1.3.6.1.4.1.43.10.37.1.8 | igmpSnoopRouterPortRefreshTimeout | 1 | 1 | A timeout interval in seconds. The maximum time that should elapse between multicast router protocol PDUs on a port in the VLAN. T… |
| 1.3.6.1.4.1.43.10.37.1.9 | igmpSnoopVLANTable | 1 | 3 | The (conceptual) table listing the VLANs on which IGMP Snooping is enabled. |
| 1.3.6.1.4.1.43.10.37.1.10 | igmpQueryEnabled | 1 | 1 | Enabled/Disables IGMP Queries for this device. The default value is True. The range is True(1) or False(2). |
| 1.3.6.1.4.1.43.10.37.1.11 | igmpQueryIpAddress | 1 | 1 | This is the IP address used in IGMP Queries. The default value is the management IP address. Since the root query device is det… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.37.2 | igmpSnoopRouter | 2 | 6 | None |
| 1.3.6.1.4.1.43.10.37.3 | igmpSnoopAddresses | 1 | 6 | None |
| 1.3.6.1.4.1.43.10.37.4 | igmpV3Snoop | 3 | 20 | None |