When a test is initiated via lsAction, the result of the
test is stored in this variable when the test has completed
or failed. The value varies by test, is set to one (other)
at the start of the test.
Parsed from file 3c16640.mib.txt
Company: None
Module: LINKSWITCH-MIB
When a test is initiated via lsAction, the result of the
test is stored in this variable when the test has completed
or failed. The value varies by test, is set to one (other)
at the start of the test.
Parsed from file LINKSWITCH-MIB.mib
Module: LINKSWITCH-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
lsTestResult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "When a test is initiated via lsAction, the result of the test is stored in this variable when the test has completed or failed. The value varies by test, is set to one (other) at the start of the test." ::= { linkSwitch 10 }
lsTestResult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "When a test is initiated via lsAction, the result of the test is stored in this variable when the test has completed or failed. The value varies by test, is set to one (other) at the start of the test." ::= { linkSwitch 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.17.10.0 | lsTestResult | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.17.1 | lsSRFilterEnable | 1 | 1 | When false, the Address Filter forwards Source Routed frames, that is, frames with a 1 in the MSB of the Source Address. When tr… |
| 1.3.6.1.4.1.43.17.2 | lsSegmentFilterEnable | 1 | 1 | Controls action taken with Eth frames with source and destination stations on the same segment (i.e. port). When true, the Addres… |
| 1.3.6.1.4.1.43.17.3 | lsMcastFilterEnable | 1 | 1 | When false, all frames with a Multicast Destination Address that does not match any Address Filter entry are forwarded to all por… |
| 1.3.6.1.4.1.43.17.4 | lsLoopDetectAction | 1 | 1 | If a station appears to be on two ports, Address Filter thrashing will occur. Detection of this situation is possible, and this … |
| 1.3.6.1.4.1.43.17.5 | lsAddressAgingTimer | 1 | 1 | A count of the seconds that will elapse before the Address Filter contents are 'aged' to remove entries which are not active. De… |
| 1.3.6.1.4.1.43.17.6 | lsIPEchoAgingHelp | 1 | 1 | If true, an IP echo frame will be broadcast on the subnet, which will cause otherwise quiecient stations to become active. The r… |
| 1.3.6.1.4.1.43.17.7 | lsProdVerSW | 1 | 1 | This describes the version of the software currently running. Returns a string in the form X.YZ, where X represents the major ver… |
| 1.3.6.1.4.1.43.17.8 | lsProdVerHW | 1 | 1 | This describes the version of the hardware currently running. Returns a string in the form X.YZ, where X represents the major ver… |
| 1.3.6.1.4.1.43.17.9 | lsLEDstate | 1 | 1 | A binary structure which describes the current state of all of the LEDs of an LinkSwitch. Actual layout available on request. |
| 1.3.6.1.4.1.43.17.11 | lsAction | 1 | 1 | Value when read will be other. Writing a value to this object will result in the associated action taking place. Note that it i… |
| 1.3.6.1.4.1.43.17.12 | lsEportNumber | 1 | 1 | A count of the Ethernet Ports supported by this system. |
| 1.3.6.1.4.1.43.17.13 | lsEportTable | 1 | 40 | None |
| 1.3.6.1.4.1.43.17.14 | lsStationsNumber | 1 | 1 | A count of stations whose Physical Address has been detected in the Source Address field of a frame which was transmitted by a st… |
| 1.3.6.1.4.1.43.17.15 | lsStationsTable | 1 | 4 | None |
| 1.3.6.1.4.1.43.17.16 | lsBusCts | 1 | 1 | A binary structure which contains the FtoE and EtoF counters for all ls ports. Actual layout available on request. |
| 1.3.6.1.4.1.43.17.17 | lsPortAMediaPresent | 1 | 1 | Reports presence and type of FDDI Port A Media. For FMS LinkSwitch, only Fiber and UTP are supported. |
| 1.3.6.1.4.1.43.17.18 | lsPortBMediaPresent | 1 | 1 | Reports presence and type of FDDI Port B Media. For FMS LinkSwitch, only Fiber and UTP are supported. |
| 1.3.6.1.4.1.43.17.19 | lsFMSBackupPSSense | 1 | 1 | Reports the presence and status of the backup power supply on FMS LinkSwitch Only. |
| 1.3.6.1.4.1.43.17.20 | lsfddiPATHRingLatency | 1 | 1 | Reports the measurement (in 80 nanosecond ticks) of total accumulated latency of the ring associated with the current path. |