The number of seconds between broadcasts of the
system's address on the attached network. This
only applies to 3Com's NETMap protocol. If this
object is set to 0, the broadcasting of the system's
address is disabled.
Parsed from file a3Com-sys.mib.txt
Company: None
Module: A3Com-System-r4-MIB
The number of seconds between broadcasts of the
system's address on the attached network. This
only applies to 3Com's NETMap protocol. If this
object is set to 0, the broadcasting of the system's
address is disabled.
Parsed from file A3Com-System-r8-MIB.mib
Module: A3Com-System-r8-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
a3sysNetMapTime OBJECT-TYPE SYNTAX INTEGER (0..120) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between broadcasts of the system's address on the attached network. This only applies to 3Com's NETMap protocol. If this object is set to 0, the broadcasting of the system's address is disabled." DEFVAL { 0 } ::= { a3ComSysMisc 1 }
a3sysNetMapTime OBJECT-TYPE SYNTAX INTEGER (0..120) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between broadcasts of the system's address on the attached network. This only applies to 3Com's NETMap protocol. If this object is set to 0, the broadcasting of the system's address is disabled." DEFVAL { 0 } ::= { a3ComSysMisc 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.13.8.1.0 | a3sysNetMapTime | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.13.8.2 | a3sysUIBinary | 1 | 1 | If on, the system is allowed to negotiate for binary transmission when a Telnet connection is made. |
| 1.3.6.1.4.1.43.2.13.8.3 | a3sysChangeTimestamp | 1 | 1 | This object contains the value of sysUpTime when the most recent change was made to this system, either via the Console, TELNET, … |
| 1.3.6.1.4.1.43.2.13.8.4 | a3sysCpuUtil | 1 | 1 | This object provides a measure of the current utilization of the CPU on this system. |
| 1.3.6.1.4.1.43.2.13.8.5 | a3sysCpuBrdMacAddr | 1 | 1 | The system's MAC address. For those devices whose CPU boards contain a MAC address, this object provides the value of that addre… |
| 1.3.6.1.4.1.43.2.13.8.6 | a3sysExpMacAddr | 1 | 1 | This identifies the MAC address to which the @m symbol is expanded when doing file copies. |
| 1.3.6.1.4.1.43.2.13.8.7 | a3sysVportTimestamp | 1 | 1 | This specifies the value of sysUpTime when the last virtual port was added or deleted. This object should be used to determine i… |
| 1.3.6.1.4.1.43.2.13.8.8 | a3sysDefDrive | 1 | 1 | This object identifies the current default drive for this system. |
| 1.3.6.1.4.1.43.2.13.8.9 | a3sysDefDriveType | 1 | 1 | This object identifies the current default drive type for this system. |
| 1.3.6.1.4.1.43.2.13.8.10 | a3sysDriveStatus | 1 | 1 | This object identifies which disk drives are supported by this system. noDrives(1) means no disk drives are supported. driveA m… |
| 1.3.6.1.4.1.43.2.13.8.11 | a3sysBogusDhcpSvr | 1 | 1 | This object has the IP address of the last seen bogus DHCP or BOOTP server. |
| 1.3.6.1.4.1.43.2.13.8.12 | a3sysNb2EepromVers | 1 | 1 | This object returns the version number of the EEPROM on a NetBuilderII. Various features are dependent on having the correct ver… |
| 1.3.6.1.4.1.43.2.13.8.13 | a3sysX25Conns | 1 | 1 | This object returns the number of active X25 connections currently maintained by the NetBuilder. |