This parameter specifies the time interval,
in seconds, within which RIP-IP sends update
packets. This parameter also determines
the length of time a route learned through
RIP-IP stays in the IP routing table. For
example, once a route is in the routing table,
the router must receive a RIP update packet
indicating the reachability of this route
every 6 * a3RipIpUpdateTime. If no updates
are received in that time interval, the entry
is removed from the routing table.
Parsed from file a3Com-ip.mib.txt
Company: None
Module: A3Com-IPextns-MIB
This parameter specifies the time interval,
in seconds, within which RIP-IP sends update
packets. This parameter also determines
the length of time a route learned through
RIP-IP stays in the IP routing table. For
example, once a route is in the routing table,
the router must receive a RIP update packet
indicating the reachability of this route
every 6 * a3RipIpUpdateTime. If no updates
are received in that time interval, the entry
is removed from the routing table.
Parsed from file A3Com-RIP-IPextns-r4-MIB.mib
Module: A3Com-RIP-IPextns-r4-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
a3RipIpUpdateTime OBJECT-TYPE SYNTAX INTEGER (5..5400) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the time interval, in seconds, within which RIP-IP sends update packets. This parameter also determines the length of time a route learned through RIP-IP stays in the IP routing table. For example, once a route is in the routing table, the router must receive a RIP update packet indicating the reachability of this route every 6 * a3RipIpUpdateTime. If no updates are received in that time interval, the entry is removed from the routing table." DEFVAL { 30 } ::= { a3ComRipIp 1 }
a3RipIpUpdateTime OBJECT-TYPE SYNTAX INTEGER (5..5400) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the time interval, in seconds, within which RIP-IP sends update packets. This parameter also determines the length of time a route learned through RIP-IP stays in the IP routing table. For example, once a route is in the routing table, the router must receive a RIP update packet indicating the reachability of this route every 6 * a3RipIpUpdateTime. If no updates are received in that time interval, the entry is removed from the routing table." DEFVAL { 30 } ::= { a3ComRipIp 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.8.1.0 | a3RipIpUpdateTime | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.8.2 | a3RipIpCtlTable | 1 | 24 | This table contains parameters that affect the operation of RIP for IP. |
| 1.3.6.1.4.1.43.2.8.3 | a3RipIpExtPolTable | 1 | 5 | The table contains a list of addresses learned via EGP that are to be included or excluded from RIP reports. |
| 1.3.6.1.4.1.43.2.8.4 | a3RipIpIntPolTable | 1 | 5 | The table contains a list of addresses learned via an IGP other than RIP that are to be included or excluded from RIP reports. |
| 1.3.6.1.4.1.43.2.8.5 | a3RipIpNetPolTable | 1 | 5 | The table contains a list of addresses that are to be included or excluded from RIP reports. Note, Network Policy overrides Stat… |
| 1.3.6.1.4.1.43.2.8.6 | a3RipIpRcvPolTable | 1 | 5 | The table contains a list of addresses learned via trusted neighbors that are to be received and stored in the routing table. |
| 1.3.6.1.4.1.43.2.8.7 | a3RipIpStaPolTable | 1 | 5 | The table contains a list of static addresses that are to be included or excluded from RIP reports. |
| 1.3.6.1.4.1.43.2.8.8 | a3RipIpNeighborTable | 1 | 4 | This table contains a list of neighbor addresses that RIP-IP uses to determine to which neighbors it should send update packets. … |
| 1.3.6.1.4.1.43.2.8.9 | a3RipIpTrustedNbrTable | 1 | 4 | This table contains a list of RIP-IP neighbors from which RIP-IP accepts packets. If this table contains no entries for a partic… |
| 1.3.6.1.4.1.43.2.8.10 | a3RipIpImpMetTable | 1 | 4 | This table specifies the operations to be performed on metrics imported from other routing update protocols before they are repor… |