This object describes the requested SNMP mode for the
system. The value of this object indicates the mode that
will become effective following a reboot of the system.
Note that only a subset of the above values may be valid
for some systems.
Parsed from file 3cSys.mib.txt
Company: None
Module: A3COM-SWITCHING-SYSTEMS-MIB
This object describes the requested SNMP mode for the
system. The value of this object indicates the mode that
will become effective following a reboot of the system.
Note that only a subset of the above values may be valid
for some systems.
Parsed from file A3COM-SWITCHING-SYSTEMS-MIB.mib
Module: A3COM-SWITCHING-SYSTEMS-MIB
Vendor: 3Com
Module: A3COM-SWITCHING-SYSTEMS-MIB
[Automatically extracted from oidview.com]
a3ComSysSystemRequestedSnmpMode OBJECT-TYPE SYNTAX INTEGER { singleAgentMode(1), multiAgentMode(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effective following a reboot of the system. Note that only a subset of the above values may be valid for some systems." ::= { a3ComSysSystem 12 }
a3ComSysSystemRequestedSnmpMode OBJECT-TYPE SYNTAX INTEGER { singleAgentMode(1), multiAgentMode(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effective following a reboot of the system. Note that only a subset of the above values may be valid for some systems." ::= { a3ComSysSystem 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.29.4.1.12.0 | a3ComSysSystemRequestedSnmpMode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.29.4.1.1 | a3ComSysSystemId | 1 | 1 | The unique identifier assigned to this system during manufacturing. |
1.3.6.1.4.1.43.29.4.1.2 | a3ComSysSystemType | 1 | 1 | The type of system. |
1.3.6.1.4.1.43.29.4.1.3 | a3ComSysSystemName | 1 | 1 | The text string describing this system. |
1.3.6.1.4.1.43.29.4.1.4 | a3ComSysSystemManufacturer | 1 | 1 | The text string describing the manufacturer of this system. |
1.3.6.1.4.1.43.29.4.1.5 | a3ComSysSystemHardwareRevision | 1 | 1 | The revision level of the system, contained in two octets. The first octet indicates the artwork revision, and the second octet … |
1.3.6.1.4.1.43.29.4.1.6 | a3ComSysSystemMemorySize | 1 | 1 | The amount of memory (RAM), in bytes, present on the system processor board. |
1.3.6.1.4.1.43.29.4.1.7 | a3ComSysSystemFlashMemorySize | 1 | 1 | The amount of flash memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.43.29.4.1.8 | a3ComSysSystemNvMemorySize | 1 | 1 | The amount of non-volatile memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.43.29.4.1.9 | a3ComSysSystemSoftwareRevision | 1 | 1 | The revision number of the Switching Systems software. Each byte indicates the following: byte 0: major release number. byte 1: mi… |
1.3.6.1.4.1.43.29.4.1.10 | a3ComSysSystemBuildTime | 1 | 1 | The build time of the system software. |
1.3.6.1.4.1.43.29.4.1.11 | a3ComSysSystemSnmpRevision | 1 | 1 | The revision number of the SNMP agent implementation. |
1.3.6.1.4.1.43.29.4.1.13 | a3ComSysSystemCurrentSnmpMode | 1 | 1 | This object describes the currently active SNMP mode for the system. Note that only a subset of the above values may be valid fo… |
1.3.6.1.4.1.43.29.4.1.14 | a3ComSysSystemAction | 1 | 1 | This object, when read, always returns the value other(1). Setting this object to the value reset(2) causes a reset of the system… |
1.3.6.1.4.1.43.29.4.1.15 | a3ComSysSystemOvertemperature | 1 | 1 | This object indicates the current overtemperature status for the system. If the system does not support overtemperature detectio… |
1.3.6.1.4.1.43.29.4.1.16 | a3ComSysSystemFanFailure | 1 | 1 | This object indicates the current fan status for the system. If the system does not support fan failure detection, this object r… |
1.3.6.1.4.1.43.29.4.1.17 | a3ComSysSystemProtocolMask | 1 | 1 | This object is a bit mask that indicates which protocols exist in the software image currently loaded in memory. The value of thi… |
1.3.6.1.4.1.43.29.4.1.18 | a3ComSysSystemConsoleAccess | 1 | 1 | This object determines whether another device can remotely access the system console via Telnet, Rlogin, or modem port. An existin… |
1.3.6.1.4.1.43.29.4.1.19 | a3ComSysSystemConsoleReadPwd | 1 | 1 | This object is the console read-access password. |
1.3.6.1.4.1.43.29.4.1.20 | a3ComSysSystemConsoleWritePwd | 1 | 1 | This object is the console write-access password. The read-write community string is required for access to this object. |
1.3.6.1.4.1.43.29.4.1.21 | a3ComSysSystemConsoleAdminPwd | 1 | 1 | This object is the console admin-access password. The read-write community string is required for access to this object. |
1.3.6.1.4.1.43.29.4.1.22 | a3ComSysSystemDateTime | 1 | 1 | The current date and time as reflected by the system clock in the format mm/dd/yy hh:mm:ss xM. |
1.3.6.1.4.1.43.29.4.1.23 | a3ComSysSystemDSTime | 1 | 1 | This parameter specifies the displacement, in minutes, from non-daylight savings time. The a3ComSysDSTime object, along with the… |
1.3.6.1.4.1.43.29.4.1.24 | a3ComSysSystemTimeZone | 1 | 1 | This parameter specifies, in minutes, displacement of the system west of Greenwich. A negative number for this parameter indicate… |
1.3.6.1.4.1.43.29.4.1.25 | a3ComSysSystemCurrentFddiStationMode | 1 | 1 | This object describes the current FDDI station mode for systems that support multi-station mode. |
1.3.6.1.4.1.43.29.4.1.26 | a3ComSysSystemRequestedFddiStationMode | 1 | 1 | This object describes the requested FDDI station mode for systems that support multi-station mode. The requested mode will become… |
1.3.6.1.4.1.43.29.4.1.27 | a3ComSysSystemLog | 4 | 13 | None |
1.3.6.1.4.1.43.29.4.1.28 | a3ComSysSystemBaseMACAddress | 1 | 1 | The base MAC address for the system. |
1.3.6.1.4.1.43.29.4.1.29 | a3ComSysSystemMACAddressCount | 1 | 1 | The number of MAC addresses allocated to this system. |
1.3.6.1.4.1.43.29.4.1.30 | a3ComSysSystemChassisSerialNumber | 1 | 1 | The serial number of the chassis. |
1.3.6.1.4.1.43.29.4.1.31 | a3ComSysSystemFPMemorySize | 1 | 1 | The amount of frame processor memory (RAM), in bytes. |
1.3.6.1.4.1.43.29.4.1.32 | a3ComSysSystemBufferSize | 1 | 1 | The amount of buffer memory, in bytes. |