A reference to MIB definitions specific to the
particular media being used to realize the
interface. For example, if the interface is
realized by an ethernet, then the value of this
object refers to a document defining objects
specific to ethernet. If this information is not
present, its value should be set to the OBJECT
IDENTIFIER { 0 0 }, which is a syntatically valid
object identifier, and any conformant
implementation of ASN.1 and BER must be able to
generate and recognize this value.
Parsed from file server.mib.txt
Company: None
Module: EICON-MIB-SERVER
A reference to MIB definitions specific to the
particular media being used to realize the
interface. For example, if the interface is
realized by an ethernet, then the value of this
object refers to a document defining objects
specific to ethernet. If this information is not
present, its value should be set to the OBJECT
IDENTIFIER { 0 0 }, which is a syntatically valid
object identifier, and any conformant
implementation of ASN.1 and BER must be able to
generate and recognize this value.
Parsed from file EICON-MIB-SERVER.mib
Module: EICON-MIB-SERVER
Vendor: EICON
Module: EICON-MIB-SERVER
[Automatically extracted from oidview.com]
srvIfSpecific OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value." ::= { srvIfEntry 22 }
srvIfSpecific OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value." ::= { srvIfEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.434.2.2.1.41.1.1 | srvIfIndex | 0 | 0 | A unique value for each interface. Its value ranges between 1 and the value of srvIfNumber. The value for each interface must r… |
| 1.3.6.1.4.1.434.2.2.1.41.1.2 | srvIfDescr | 0 | 0 | A textual string containing information about the interface. This string should include the name of the manufacturer, the produc… |
| 1.3.6.1.4.1.434.2.2.1.41.1.3 | srvIfType | 0 | 0 | srvIftype |
| 1.3.6.1.4.1.434.2.2.1.41.1.4 | srvIfMtu | 0 | 0 | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used … |
| 1.3.6.1.4.1.434.2.2.1.41.1.5 | srvIfSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those … |
| 1.3.6.1.4.1.434.2.2.1.41.1.6 | srvIfPhysAddress | 0 | 0 | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which … |
| 1.3.6.1.4.1.434.2.2.1.41.1.7 | srvIfAdminStatus | 0 | 0 | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.434.2.2.1.41.1.8 | srvIfOperStatus | 0 | 0 | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.434.2.2.1.41.1.9 | srvIfLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior t… |
| 1.3.6.1.4.1.434.2.2.1.41.1.10 | srvIfInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.434.2.2.1.41.1.11 | srvIfInUcastPkts | 0 | 0 | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.434.2.2.1.41.1.12 | srvIfInNUcastPkts | 0 | 0 | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.434.2.2.1.41.1.13 | srvIfInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
| 1.3.6.1.4.1.434.2.2.1.41.1.14 | srvIfInErrors | 0 | 0 | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.434.2.2.1.41.1.15 | srvIfInUnknownProtos | 0 | 0 | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.434.2.2.1.41.1.16 | srvIfOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.434.2.2.1.41.1.17 | srvIfOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those… |
| 1.3.6.1.4.1.434.2.2.1.41.1.18 | srvIfOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast … |
| 1.3.6.1.4.1.434.2.2.1.41.1.19 | srvIfOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent them from bei… |
| 1.3.6.1.4.1.434.2.2.1.41.1.20 | srvIfOutErrors | 0 | 0 | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.434.2.2.1.41.1.21 | srvIfOutQLen | 0 | 0 | The length of the output packet queue (in packets). |